Days to Ship |
|
---|
Hinges - Heavy Load, Stainless Steel
MISUMI
With up to 1000N allowable load (when two hinges are used). Made of Stainless Steel.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Hinges - Stainless Steel, Offset Holes
MISUMI
General purpose and stainless steel hinges.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
MISUMI
General purpose and stainless steel hinges.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Hinges - Stainless Steel, Countersunk Thru Holes, GN237 Series
JW WINCO
GN 237 hinges are characterized by their compact and stable design. The various material and surface choices in combination with two mounting types enable very specific applications.
GN 237.3 stainless steel heavy duty hinges are designed for use under tough conditions and are distinguished by a compact design. The hinge pins are integral and allow the hinges to be used in environments with strong vibrations and shocks.
Configure Now
Ships as soon as | 5 Days |
---|
Adjustable Friction Hinges - GN437 Series
JW WINCO
The set screw in GN 437 adjustable friction hinges allow the mobility of the hinge to be changed, and also generates a constant braking torque adjustable across the entire rotating range. The rotation of doors and flaps is inhibited, preventing inadvertent movement.
The friction torque is accomplished by interlocking two slim friction cones. The large friction surface and the hard-wearing plastic of the friction cones guarantee a long service life with virtually constant stiffness. This can be re-adjusted, if necessary, with the set screw.
Owing to the structure and the pre-stress of the friction cones, the hinge has virtually no radial play and no play at all in the axial direction.
Friction cone is temperature resistant to 80° C (176° F)
Configure Now
Ships as soon as | 5 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
MISUMI
Standard Aluminum Hinges selectable from Clear Anodize or Black Anodize.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
MISUMI
1. Stepped Stainless Steel Hinges effeictive for panel mounting with 2~5mm thickness.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Hinges - Zinc Die-Cast or Aluminum, Countersunk Thru Holes or Threaded Stud Type, GN237 Series
JW WINCO
GN 237 hinges are characterized by their compact and stable design. The various material and surface choices in combination with two mounting types enable very specific applications.
Configure Now
Ships as soon as | 5 Days |
---|
MISUMI
Nylon Hinges - White or Black Selectable
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Hinges for Welding - Heavy Load
MISUMI
Hinges with 3mm or more plate thickness and for heavy load. Weld-On Detachable Type or Weld-On Stainless Steel Type is available.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Takigen
For complete product overview and details on Extruded, Flat, Hinge B-206 see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Hinges with built-in safety switch - SUPER-technopolymer, CFSW. Type
ELESA
This hinge can be subject to frequent cleaning cycles and can be used in any situation or environment where a special attention to cleaning and hygiene is requested, thanks to the IP67 protection class and the use of stainless steel elements for closing the hinge body.
Limited size, different assembly and output options (cable/connector) make this product easy to install on the most common aluminium profiles (30 mm minimum wide).
Easy to assemble: the built-in safety multiple switch and the hinge come in one piece offering a very easy and fast assembly. This is a big advantage in comparison with some traditional systems which require to set up separately a hinge and a safety switch connected by a special pin to replace the standard pin of the hinge.
Universal usage: CFSW. hinges can be assembled on the most common aluminium profiles.
By using a redundant system, the CFSW hinges allow to have a system design up to SIL3 in compliance with IEC 62061, PLe in compliance with EN ISO 13849-1 or security category 4 in compliance with EN 954-1 with redundant structure.
Configure Now
Ships as soon as | 4 Days |
---|
Stainless Steel Heavy Duty Hinges【2-4 Pieces Per Package】
Trusco Nakayama
For complete product overview and details on Stainless Steel Heavy Duty Hinges see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Hinges -SUPER-technopolymer, CFM. Type
ELESA
Max 270° (-90° and +180° being 0° the condition where the two interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.
Configure Now
Ships as soon as | 4 Days |
---|
Hinge for thin doors -Technopolymer, CFB. Type
ELESA
Max 200° (-10° and +190° being 0° the condition where the two interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.
Configure Now
Ships as soon as | 4 Days |
---|
Hinges - Plastic, Countersunk Thru hole, EN237.1 Series
JW WINCO
EN 237.1 Hinges Plastic, Countersunk Thru Hole, Socket Head Thru Hole.
Plastic is temperature resistant up to 140° C (285° F).
Configure Now
Ships as soon as | 5 Days |
---|
Hinges for Welding - Stainless Steel
MISUMI
Dedicated for weld-mounting without holes. Made of stainless steel.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Hinges - Stainless Steel Stepped
MISUMI
Stepped Stainless Steel Hinges effective for 5mm panel mounting.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Hinges -Technopolymer, CFA. Type
ELESA
Max 215° (-35° and +180° being 0° the condition where the two interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.
Configure Now
Ships as soon as | 4 Days |
---|
Spring hinges - for automatic return SUPER-technopolymer, CFMR. Type
ELESA
Max 270° (-90° and +180° being 0° the condition where the two interconnected surfaces are on the same plane).
The hinge can reach -90 ° but this condition must not be used for CFMR-NO execution.
Do not exceed the rotation limit angle so as not to prejudice the correct operation of the return spring.
Configure Now
Ships as soon as | 4 Days |
---|
Hinges with screw-covers -Technopolymer, CFQ. Type
ELESA
Max 195° (-15° and +180° being 0° the condition where the interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.
Configure Now
Ships as soon as | 4 Days |
---|
Flat Type Hinge with Bushing B-78-B
Takigen
For complete product overview and details on Flat Type Hinge with Bushing B-78-B see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Shirokuma
For complete product overview and details on Long Hinge, BF-3 see the sections below:
Configure Now
Ships as soon as | 5 Days |
---|
Hinges - Aluminium, CMM-AL Type
ELESA
Max 270° (-90° and +180° being 0° the condition where the two interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.
Configure Now
Ships as soon as | 4 Days |
---|
Takigen
For complete product overview and details on Hinge B-217 see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Stainless Steel Medium Duty Hinges【4-10 Pieces Per Package】
Trusco Nakayama
[Features]
· For those with nylon rings, inserting the nylon ring between the knuckles makes movement smooth
Configure Now
Ships as soon as | 4 Days |
---|
Hinges - Long, Stainless Steel
MISUMI
Stainless Steel Hinges which can be cut by a customer for his or her use.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Hinges - Offset Mounting Holes
MISUMI
The right-hand mooting holes and the left-hand ones are asymmetrically positioned in order to prevent interference of bolt heads when the door is opened.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Hinges -Technopolymer, CFE. Type
ELESA
This hinge has been developed in particular for doors provided with gaskets.
Rotation angle (approximate value)
Max 200° (-80° and +120° being 0° the condition where the two interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.
Configure Now
Ships as soon as | 4 Days |
---|
Angled Hinge, BF-6【1-50 Pieces Per Package】
Shirokuma
For complete product overview and details on Angled Hinge, BF-6 see the sections below:
Configure Now
Ships as soon as | 5 Days |
---|
Steel Light Duty General Hinges【10 Pieces Per Package】
Trusco Nakayama
For complete product overview and details on Steel Light Duty General Hinges see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Lockable Hinges - Plastic, With Countersunk Screw Holes, EN151.2 Series
JW WINCO
By utilizing EN 151.2 hinges, doors, flaps, etc. can be locked in any position.
When not engaged, the clamping lever is not connected to the hinge pin and is in a "free-wheeling" position.
When the operator pushes down on the lever button, it engages itself in two notches and the hinge can be tightened or loosened. This prevents the hinge from being accidentally moved. It also ensures that the lever will never interfere with the movement of the hinge.
Configure Now
Ships as soon as | 5 Days |
---|
Adjustable Alignment Hinges - Zinc Die-Cast, With Alignment Bushings, GN127 Series
JW WINCO
The GN 127 hinge offers the following advantages:
Mounting position is adjustable; Type H is adjustable vertically, Type B is adjustable horizontally, and Type HB is adjustable horizontally as well as vertically.
There are no oblong holes reducing the contact area of the screw head. In addition, the serration on the back of the bushing prevents the hinge from moving. Arrow points in illustration indicate the zero reference mark for ease of installation.
The adjustment ability permits a technically and optically perfect alignment of the door to its frame.
Configure Now
Ships as soon as | 5 Days |
---|
Sheet Metal Hinges - Steel, With Bores for Countersunk Screws GN136 Series
JW WINCO
GN 136 sheet metal hinges are a low-cost option for light load applications.
Configure Now
Ships as soon as | 5 Days |
---|
Takigen
For complete product overview and details on Cover Hinge B-178 see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Takigen
For complete product overview and details on Extruded, Flat Hinge B-205 see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Stainless Steel Spring Hinge, Wooden Screw Mounted Type
Trusco Nakayama
For complete product overview and details on Stainless Steel Spring Hinge, Wooden Screw Mounted Type see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Hinges for profiles -Technopolymer, CFG. Type
ELESA
This type of hinge can be used with profiles from 30 up to 60 mm, also combining different dimensions.
Rotation angle (approximate value)
Max 280° (-100° and +180° being 0° the condition where the two interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.
Configure Now
Ships as soon as | 4 Days |
---|
Hinges for Welding - Low Carbon Steel
MISUMI
Dedicated for weld-mounting without holes. Made of steel.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Steel Heavy Duty Hinges【4-10 Pieces Per Package】
Trusco Nakayama
For complete product overview and details on Steel Heavy Duty Hinges see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Stainless Steel Heavy Duty Weld-on Hinges【2-10 Pieces Per Package】
Trusco Nakayama
For complete product overview and details on Stainless Steel Heavy Duty Weld-on Hinges see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Hinges - Plastic, EN154 Series
JW WINCO
Elesa® original design EN 154 hinges.
EN 154 hinges have wings of unequal length.
They are suitable for applications where thick walled doors or door profiles have to be screwed on to thin walled housings.
Configure Now
Ships as soon as | 5 Days |
---|
Weld-on Steel Hinges【4-10 Pieces Per Package】
Trusco Nakayama
For complete product overview and details on Weld-on Steel Hinges see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Hinges with detent position at 90° -Technopolymer, CFA-F Type
ELESA
CFA-F hinges are recommended when the opening of the door must not exceed the limit of 90°.
Once the hinge is fitted onto the machine/door, the teeth of the detent system remain inside the hinge. Thus the operator cannot reach them for the safety of his hands.
Rotation angle (approximate value)
Max 100° (-10° and +90° being 0° the condition where the two interconnected surfaces are on the same plane).
Configure Now
Ships as soon as | 4 Days |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Main Body Type |
Flat Hinge Type |
Length L(mm) |
Operating Environment |
Main Body Material |
Main Body Surface Treatment |
Width W(mm) |
Additional Function |
Reversed |
Mounting Method |
Mounting Screw Hole Type |
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||
Brand | MISUMI | MISUMI | MISUMI | JW WINCO | JW WINCO | RICH ENGINEERIN | MISUMI | MISUMI | JW WINCO | MISUMI | MISUMI | Takigen | ELESA | Trusco Nakayama | ELESA | ELESA | JW WINCO | MISUMI | MISUMI | ELESA | ELESA | ELESA | Takigen | Shirokuma | ELESA | Takigen | Trusco Nakayama | MISUMI | MISUMI | ELESA | Shirokuma | Trusco Nakayama | JW WINCO | JW WINCO | JW WINCO | Takigen | Takigen | Trusco Nakayama | ELESA | MISUMI | Trusco Nakayama | Trusco Nakayama | JW WINCO | Trusco Nakayama | ELESA |
Product Series | Hinges - Stainless Steel, Countersunk Thru Holes, GN237 Series | Hinges - Zinc Die-Cast or Aluminum, Countersunk Thru Holes or Threaded Stud Type, GN237 Series | Hinges with built-in safety switch - SUPER-technopolymer, CFSW. Type | Spring hinges - for automatic return SUPER-technopolymer, CFMR. Type | Lockable Hinges - Plastic, With Countersunk Screw Holes, EN151.2 Series | Adjustable Alignment Hinges - Zinc Die-Cast, With Alignment Bushings, GN127 Series | Sheet Metal Hinges - Steel, With Bores for Countersunk Screws GN136 Series | Stainless Steel Heavy Duty Weld-on Hinges【2-10 Pieces Per Package】 | Hinges with detent position at 90° -Technopolymer, CFA-F Type | ||||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
Days to Ship |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included | 5 Days | 5 Days | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 5 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days |
Same Day Stock Items Included |
Same Day
Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days | 4 Days | 4 Days | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days | 5 Days | 4 Days | 5 Days | 5 Days | 5 Days | 4 Days | 4 Days | 4 Days | 4 Days |
Same Day Stock Items Included | 4 Days | 4 Days | 5 Days | 4 Days | 4 Days |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||
Main Body Type | - | - | - | - | - | - | - | - | - | - | - | Flat Hinges | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Flat Hinges | - | - | - | - | Concealed Hinge, Hidden Hinge | Flat Hinges | - | - | - | - | - | - | - | - |
Flat Hinge Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Stepped Type (One Way Foldable) | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Length L(mm) | 50 ~ 125 | 25 ~ 100 | 25 ~ 100 | 30 ~ 60 | 40 ~ 60 | 25.5 ~ 102 | 66 ~ 113 | - | 30 ~ 60 | - | 50 ~ 150 | 50 ~ 150 | 110 | - | 30 ~ 60 | 109 | 30 ~ 60 | 40 ~ 100 | 41 ~ 48 | 39.5 ~ 96.5 | 67 | 50 | - | - | 40 ~ 60 | - | - | 300 ~ 1000 | 40 ~ 75 | 30.5 ~ 66 | 40 ~ 55 | - | 49 ~ 65 | 60 | 40 ~ 60 | 60 ~ 100 | 50 ~ 125 | - | 36 | 60 ~ 100 | - | - | 30 ~ 48 | - | 49.5 ~ 65 |
Operating Environment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Retainer pin/stopper set | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Main Body Material | Stainless Steel / Zinc Alloy | - | - | Stainless Steel | Zinc Alloy | Stainless Steel / Zinc Alloy / Resin | - | - | Aluminum / Zinc Alloy | - | - | - | 00146 | - | 00146 | 00146 | Cold rolled steel plate | - | - | 00146 | 00146 | 00146 | - | - | Aluminum | - | - | - | - | 00146 | Steel | - | Cold rolled steel plate | Zinc Alloy | Steel | - | - | - | 00146 | - | - | - | Cold rolled steel plate | - | 00146 |
Main Body Surface Treatment | Buffed / Chrome Plating | - | - | Satellite Chrome Plating | Black paint / Velour Chrome Plating | N/A / Buffed / Chrome Plating | Black Alumite Treatment / White alumite treatment | - | Black chrome plating / Black paint / Velour Chrome Plating | - | - | - | - | - | - | - | Satellite Chrome Plating | - | - | - | - | - | - | - | - | - | - | - | - | - | Chrome Plating | - | Satellite Chrome Plating | Coating | Zinc Plating | - | - | - | - | - | - | - | Satellite Chrome Plating | - | - |
Width W(mm) | 50 ~ 125 | 20 ~ 60 | - | 30 ~ 60 | 40 ~ 60 | 25 ~ 80 | 36 ~ 80 | - | 30 ~ 120 | 47 ~ 80 | 50 ~ 120 | 50 | 60 | - | 30 ~ 76 | 45 | 30 ~ 60 | 30 ~ 60 | 36 ~ 48 | 38.5 ~ 97.5 | 55 | 45 | - | - | - | - | - | - | 35 ~ 50 | 45.5 ~ 97 | 41 ~ 43 | - | 48 ~ 64 | 76 | 40 ~ 60 | 90 | 38 | - | 54 ~ 114 | 50 ~ 80 | - | - | 26 ~ 41 | - | 48 ~ 63.5 |
Additional Function | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Reversed | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | For Both Right and Left Sides | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Mounting Method | - | - | - | Screw | Screw | - | - | - | Screw / Other | - | - | - | - | - | - | - | Screw | - | - | - | - | - | - | - | - | - | - | - | - | - | Screw | - | Screw | Other | Screw | - | - | - | - | - | - | - | Other | - | - |
Mounting Screw Hole Type | Countersinks / Counterbored | - | - | - | - | Round Bore / Countersinks / Female Thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Round Bore | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy