Days to Ship |
|
---|
Inserts - Threaded, Slotted, Self-Tapping
MISUMI
• Operating Environment: Manufacturing Equipment
• Application: Light Metal
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Inserts - Press Fit, Brass, Cadmium-Free, Flanged Bit Insert【1-5,000 Pieces Per Package】
Tokai
General purpose type. Low cost and well balanced.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Threaded, Stainless Steel, Coarse
MISUMI
• Operating Environment: Manufacturing Equipment
• Application: Light Metal
• Material: 304 Stainless Steel
• Screw Type: Metric (fine) Thread
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 2/4【1-5,000 Pieces Per Package】
Tokai
These inserts are the best choice for easy and secure fitment into plastic holes.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 302
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Inserts - Threaded, Stainless Steel, Coarse, 100 Pack【100 Pieces Per Package】
MISUMI
Package-Deal Purchasing recommended for bolts of large volume use.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Inserts - Recoil Threaded, Nitronic 60
Recoil
Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Press Fit, Flanged, Brass, HFB
Hirosugi-Keiki
[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing
Configure Now
Ships as soon as | 17 Days |
---|
Inserts - Self Tapping, Three Hole, Short, Type 308
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Recoil Threaded, Phosphor Bronze
Recoil
Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).
Configure Now
Ships as soon as | 4 Days |
---|
Threaded Inserts - Round Allen Socket Nut, Steel/Stainless Steel, Inch
AMPG
Round Allen Socket Nut — Inch
・Alloy Steel and 18-8 (A2) Stainless Steel Options
・This is a representative of the SS insert nuts
Configure Now
Ships as soon as | 1 Day |
---|
Configure Now
Ships as soon as | 6 Days |
---|
Inserts - Threaded, Stainless Steel, E-Sert
Precision Tsugami
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Recoil Free Running Thread, Stainless Steel, Inch Coarse
Recoil
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Self Tapping, Three Hole, Short, Type 307
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Configure Now
Ships as soon as | 4 Days |
---|
Ensat Expanded Slot Type, Model 302, Inch Type
KKV
[Features]
· Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
· The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
· If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.
[Materials]
SUM22L free-cutting steel (equivalent), hexavalent chromate
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Threaded, Inch Coarse, with Notch【10 Pieces Per Package】
Recoil
*Unfortunately, only lengths of 1.5D are available.
Configure Now
Ships as soon as | 4 Days |
---|
Threaded Inserts - Round Allen Socket Nut, Steel/Stainless Steel, Metric Thread
AMPG
Round Allen Socket Nut — Metric
・Alloy Steel and 18-8 (A2) Stainless Steel Options
・This is a representative image of the Alloy Steel, Black Oxide Coated insert nuts
Configure Now
Ships as soon as | 1 Day |
---|
Inserts - Recoil Threaded, Stainless Steel
Recoil
An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Threaded, Stainless Steel, with Notch, Metric【5-10 Pieces Per Package】
Recoil
[Type] Threaded Insert Use
[Application] Light Metal
[Materials] SUS304 with Notch
[Application] Light Metal
[Screw type] Coarse/Fine Screw Diameter (after insertion) 2 2.2 2.5 3 3.5 4 5 6 7 8 9 10 11 12 14 16 18 20 Length (after insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg.
[Pitch (mm)] 0.4 0.45 0.5 0.6 0.7 0.8 1.0 1.25 1.5 1.75 2.0 2.5 Usage Environment: Internal Combustion Engines/Manufacturing Equipment Quantity 5 10
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Press Fit, SL Type【1-5,000 Pieces Per Package】
Japan Drive It
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Self Tapping, Chip-Free, Long, Type 338
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Threaded, Stainless Steel, Phosphor Bronze【1-100 Pieces Per Package】
Nippon Sprew
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Press Fit, Brass, Cadmium-Free, SB (Z) Type【1-15,000 Pieces Per Package】
Tokai
General purpose type. Low cost and well balanced.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Recoil Free Running Thread, Stainless Steel, Locking
Recoil
Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Self Tapping, Ultra Coarse, Type 309
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Self Tapping, Chip-Free, Short, Type 337
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Threaded, Inch Coarse【1-100 Pieces Per Package】
Nippon Sprew
Screw reinforcer featuring coiling of a diamond shaped stainless steel thread. Can achieve high-reliability tightening by using the springback skillfully.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 4, Flanged【1-1,000 Pieces Per Package】
Tokai
Offers the strongest tension and other strengths over other inserts.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Press Fit, C-Lock (CL Type)【100 Pieces Per Package】
Bohsei
The outer knurled form is reversed, which allows for high tensile strength and torque strength.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Threaded, Non-Locking【1-1,000 Pieces Per Package】
Sel Japan
Optimal nut for preventing looseness of vibrating parts, etc. For mounting, press in and tighten with a normal screwdriver. No special tools required.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Recoil Free Running Thread, Stainless Steel, Metric
Recoil
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
Configure Now
Ships as soon as | 4 Days |
---|
Brass Insert Nut (Screw-In Type) IRB/IRB-C
Hirosugi-Keiki
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing
RoHS-compliant
Configure Now
Ships as soon as | 10 Days |
---|
Inserts - Threaded, Floating【1-1,000 Pieces Per Package】
Sel Japan
Able to obtain high retention force. Reduces work hours and costs drastically, and eliminates pitching shift during assembly.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Threaded, Inch Fine【1-100 Pieces Per Package】
Nippon Sprew
Screw reinforcer featuring a coiled, diamond-shaped stainless steel thread. Can achieve high-reliability tightening by effective use of the the springback.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Press Fit, C-Lock (HCL Type)【50-100 Pieces Per Package】
Bohsei
Flange shape enables screws to be tightened without damaging plastics. Also prevents plastic burrs from forming when inserts are pressed in.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 303
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Self Tapping, Brass, Type 305
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Configure Now
Ships as soon as | 4 Days |
---|
Japan Drive It
[Type] Press Fit Use
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2
Configure Now
Ships as soon as | 4 Days |
---|
Brass Insert Nut (Screw-In Type / Slotted) IRB-SW/-SCW
Hirosugi-Keiki
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing
RoHS-compliant
Configure Now
Ships as soon as | 10 Days |
---|
Inserts - Threaded, Metric Fine【1-100 Pieces Per Package】
Nippon Sprew
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Recoil Thread Repair Kit with Tap, Inch Fine, EA949VH-7A
ESCO
【Product Specifications】
・Material-Stainless steel (SUS304)
・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
・Use a tap holder esparately
・Case dim.-195 x 85 x 30 (H)mm
・Dim.-7/16"-20
・No. of recoils-10 pcs
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Threaded, Stainless Steel【20 Pieces Per Package】
KSSC
Insert screw that can be inserted and removed easily and smoothly.
[Features]
· Ready-to-use screw insert, compatible with the tools you have at hand.
· The sampling notch makes it unnecessary to forcibly pull out to avoid damaging the base material.
[Applications]
· For reinforcement of materials such as aluminum and plastic where female threads have low strength.
· Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.
· For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.
· Repairs and reforms broken, worn out, and crushed female threads.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Recoil Spark Plug Thread Repair Kit, with Piloted Tap【10 Pieces Per Package】
Recoil
Kit for spark plugs includes a pilot tap.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Self Tapping, Three Hole, Type 308
Sunco
[Nominal M] 16
[Material] Stainless Steel
[Surface Processing] None
Configure Now
Ships as soon as | 4 Days |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Category |
Application |
Material |
Screw Type |
Thread Diameter (Inserted) - Metric |
Thread Diameter (Inserted) - Inch |
Length (After Insertion) L (D = Screw Shaft Dia. M) |
Notch |
Shape |
Sale Unit |
Brand | MISUMI | Tokai | MISUMI | Tokai | KKV | MISUMI | Recoil | Hirosugi-Keiki | KKV | Recoil | AMPG | NBK | Precision Tsugami | Recoil | KKV | KKV | Recoil | AMPG | Recoil | Recoil | Japan Drive It | KKV | Nippon Sprew | Tokai | Recoil | KKV | KKV | Nippon Sprew | Tokai | Bohsei | Sel Japan | Recoil | Hirosugi-Keiki | Sel Japan | Nippon Sprew | Bohsei | KKV | KKV | Japan Drive It | Hirosugi-Keiki | Nippon Sprew | ESCO | KSSC | Recoil | Sunco |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Inserts - Press Fit, Brass, Cadmium-Free, Flanged Bit Insert【1-5,000 Pieces Per Package】 | Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 2/4【1-5,000 Pieces Per Package】 | Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 302 | Inserts - Threaded, Stainless Steel, Coarse, 100 Pack【100 Pieces Per Package】 | Threaded Inserts - Round Allen Socket Nut, Steel/Stainless Steel, Inch | Inserts - Recoil Free Running Thread, Stainless Steel, Inch Coarse | Inserts - Threaded, Inch Coarse, with Notch【10 Pieces Per Package】 | Threaded Inserts - Round Allen Socket Nut, Steel/Stainless Steel, Metric Thread | Inserts - Threaded, Stainless Steel, with Notch, Metric【5-10 Pieces Per Package】 | Inserts - Threaded, Stainless Steel, Phosphor Bronze【1-100 Pieces Per Package】 | Inserts - Press Fit, Brass, Cadmium-Free, SB (Z) Type【1-15,000 Pieces Per Package】 | Inserts - Recoil Free Running Thread, Stainless Steel, Locking | Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 4, Flanged【1-1,000 Pieces Per Package】 | Inserts - Press Fit, C-Lock (CL Type)【100 Pieces Per Package】 | Inserts - Recoil Free Running Thread, Stainless Steel, Metric | Inserts - Press Fit, C-Lock (HCL Type)【50-100 Pieces Per Package】 | Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 303 | Inserts - Recoil Thread Repair Kit with Tap, Inch Fine, EA949VH-7A | Inserts - Recoil Spark Plug Thread Repair Kit, with Piloted Tap【10 Pieces Per Package】 | ||||||||||||||||||||||||||
CAD |
|
|
| ||||||||||||||||||||||||||||||||||||||||||
Days to Ship |
Same Day
Stock Items Included | 4 Days |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days | 17 Days | 4 Days | 4 Days | 1 Day | 6 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 1 Day | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 10 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 10 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
Category | Self-Tapping | Standard | Standard | Standard | Self-Tapping | Standard | Standard | Press Fitting | Self-Tapping | Standard | - | Key Locked | Standard | Standard | Self-Tapping | Self-Tapping | Standard | - | Standard | Standard | Press Fitting | Self-Tapping | Standard | Standard | Standard | Self-Tapping | Self-Tapping | Standard | Standard | Press Fitting | Crimped | Standard | Self-Tapping | Crimped | Standard | Press Fitting | Self-Tapping | Self-Tapping | Press Fitting | Self-Tapping | Standard | - | Standard | Standard | Self-Tapping |
Application | Light Metal | General Resin | Light Metal / Cast Iron / General Resin | General Resin | - | Light Metal | Light Metal | Light Metal | - | Light Metal | - | Light Metal / Cast Iron / General Resin / Wood | Light Metal / Cast Iron / General Resin | Light Metal | - | - | Light Metal | - | Light Metal | Light Metal | - | - | Light Metal | General Resin | Light Metal | - | - | Light Metal | General Resin | General Resin | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | General Resin | - | - | General Resin | Light Metal | Light Metal | - | Light Metal / Cast Iron / General Resin | - | - |
Material | Steel / Stainless steel (SUS303 / SUS304) | Brass | Stainless steel (SUS303 / SUS304) | Brass | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel / Brass | Stainless steel (SUS303 / SUS304) | Nitronic 60 | Brass | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | Phosphor Bronze | Steel / Stainless steel | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | Steel | Stainless steel (SUS303 / SUS304) | Steel / Stainless steel | 316 Stainless Steel | Stainless steel (SUS303 / SUS304) | Brass | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | Stainless steel (SUS303 / SUS304) / Phosphor Bronze | Brass | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) / Brass | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | Stainless steel (SUS303 / SUS304) | Brass | Brass | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Brass | Steel / Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Brass | Steel | Brass | Brass | Brass | Stainless steel (SUS303 / SUS304) | - | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) |
Screw Type | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread / Metric (fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | - | Metric (coarse) Thread | Metric (coarse) Thread | Unify (coarse) Thread | Metric (coarse) Thread | Unify (coarse) Thread / Unify (Fine) Thread / Whitworth (Coarse) Screw | Unify (coarse) Thread | - | Metric (coarse) Thread | Metric (coarse) Thread / Metric (fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Unify (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Unify (Fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (fine) Thread | - | Metric (coarse) Thread | Metric (fine) Thread | Metric (fine) Thread |
Thread Diameter (Inserted) - Metric | 3 ~ 12 | 2 ~ 8 | 2 ~ 18 | 2 ~ 10 | 2.5 ~ 30 | 3 ~ 8 | 3 ~ 12 | 3 | 3 ~ 16 | 3 ~ 24 | - | 5$5 | 2 ~ 24 | - | 3 ~ 16 | - | - | - | 3 ~ 16 | 2 ~ 20 | 2 ~ 10 | 3 ~ 16 | 2 ~ 30 | 1.4 ~ 6 | 2.5 ~ 24 | 3 ~ 16 | 3 ~ 12 | - | 3 ~ 8 | 2 ~ 6 | 3 ~ 4 | 8 ~ 24 | 2 ~ 8 | 3 ~ 4 | - | 3 ~ 6 | 3 ~ 10 | 3 ~ 6 | 2 ~ 6 | 2.6 ~ 8 | 10 ~ 20 | - | 3 ~ 6 | 14 | 16 |
Thread Diameter (Inserted) - Inch | - | - | - | - | - | - | - | - | - | - | - | - | - | 1-1/4-7 ~ #12-24 | - | 1/2 ~ No. 10 | 1/4-20 ~ #10-24 | - | - | - | - | - | - | - | - | - | - | 1/2-13 ~ #10-24 | - | - | - | - | - | - | 1/2-20 ~ #10-32 | - | - | - | - | - | - | - | - | - | - |
Length (After Insertion) L (D = Screw Shaft Dia. M) | - | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 3D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1.5D | - | 1D / 1.5D / 2D | - | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.5D / 0.6D | 1D / 1.5D / 2D | - | - | 1.5D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D | - | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D | 1D / 1.5D / 2D | - | - | 1D / 1.5D / 2D / 2.5D / 3D | 1.5D / 2D | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | - | 1D / 1.5D / 2D / 3D | - | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D | - | - |
Notch | No | No | Presence | No | - | Presence | Presence | No | - | Presence | - | Presence | Presence | Presence | - | No | Presence | - | Presence | Presence | No | - | Presence | No | Presence | - | - | Presence | No | - | No | Presence | No | No | Presence | - | - | - | No | No | Presence | - | Presence | - | No |
Shape | Slotted | Standard | - | Standard | Slotted | - | - | Standard | 3-Hole Type | - | - | - | - | - | 3-Hole Type | Slotted | - | - | - | - | Standard | Chip-free Type | - | Standard | - | Standard | Chip-free Type | - | Standard | Standard | - | - | Standard | - | - | Standard | Small Outside Diameter Slotted Type | Standard | Standard | Slotted | - | - | Standard | - | 3-Hole Type |
Sale Unit | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. | Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | - | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Box/package | - | Low Quantity Available beginning with 1 pc. | Box/package | Low Quantity Available beginning with 1 pc. ~ Box/package | - | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ~ Box/package | - | Box/package | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. | Box/package | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. ~ Box/package | - | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Box/package | Low Quantity Available beginning with 1 pc. ~ Box/package | - | Box/package | Box/package | Low Quantity Available beginning with 1 pc. |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy