MenuClose
Inserts - Tangless, Threaded, Stainless Steel
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount is available
Revised Screw Insert. No Need of Breaking Tongue after Insertion. Easy Extraction with a specified tool. Facilitates Insert Operation compared with conventional products.
- Rapid Design
Edit Part Configuration
Part Number
Configure to get your Part Number
Specifications
| Part Number | - | L |
| TLTS2.5 ENT3 ENTP5 TLTP10 | - - | 5 6 |
■Tangless Inserts
*M (Coarse Thread) and L are the sizes after insertion.
[ ! ]L dimension after insertion is shorter than that before the insertion.
[ ! ]These specialized tools allow insertion and removal of tangless inserts, reducing working human hours.
| Part Number | *(L) After Insertion | Tap Pilot Hole Dia. | |||
| Type | *M | (Reference) | |||
| TLTS | 2.5 | 2.5 | 3.8 | 5 | 2.60~2.65 |
| 3 | 3 | 4.5 | 6 | 3.12~3.20 | |
| 4 | 4 | 6 | 8 | 4.17~4.30 | |
| 5 | 5 | 7.5 | 10 | 5.16~5.33 | |
| 6 | 6 | 9 | 12 | 6.25~6.42 | |
| 8 | 8 | 12 | 16 | 8.31~8.52 | |
| 10 | 10 | 15 | 20 | 10.37~10.62 | |
[ ! ]L dimension after insertion is shorter than that before the insertion.
[ ! ]These specialized tools allow insertion and removal of tangless inserts, reducing working human hours.
Part Number Being Previewed:
- Please use our configuration tools to update this preview to your specific part.
Loading...
| Part Number |
|---|
| TLTS2.5-2.5 |
| TLTS2.5-3.8 |
| TLTS2.5-5 |
| TLTS3-3 |
| TLTS3-4.5 |
| TLTS3-6 |
| TLTS4-4 |
| TLTS4-6 |
| TLTS4-8 |
| TLTS5-5 |
| TLTS5-7.5 |
| TLTS5-10 |
| TLTS6-6 |
| TLTS6-9 |
| TLTS6-12 |
| TLTS8-8 |
| TLTS8-12 |
| TLTS8-16 |
| TLTS10-10 |
| TLTS10-15 |
| TLTS10-20 |
Loading...
Specifications/Overview
Figure 1) attach the red (or blue) handle to the hexagonal shank of the insertion tool and loosen the double nut.
Fig. 2) turn the tongueless on the threaded part of the tip of the tool until the claws of the tool and insert are caught. At that time, since the tongueless has no direction, it can be installed from either side.
Fig. 3) adjust the loosened double nut to correspond to each nominal length so that the gap between the white resin part and the tongueless end opens by one thread, and fix it with the double nut part. please.
Fig. 4) align the tool so that it is perpendicular to the base material, and insert it while rotating it without pressing it strongly.
Fig. 5) when the resin part comes into contact with the base material and does not rotate, turn the tool over. At this time, please note that the resin part will crack if you continue to turn it strongly after hitting the base material.
Figure 6) insertion is complete when the tool is separated from the base material.
Basic Information
| Category | Tangless Insert | Application | Light Metal | Material | 304 Stainless Steel |
|---|---|---|---|---|---|
| Screw Type | Coarse | Notch | No | Operating Environment | Manufacturing Equipment |
| Sale Unit | Low Quantity Available beginning with 1 pc. | Material Certificate | Available | Material Certificate: Materials | SUS304 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Inserts - Tangless, Stainless Steel, Metric Coarse
- Inserts - Tangless, Stainless Steel
- Inserts - Tangless, Phosphor Bronze, Metric Coarse
- Recoil Tangless Insert (UNC)
- Recoil Tangless Insert (UNF)
- Tongueless / Insert Size (mm) (SUS304)
- Recoil Tangless Insert (Phosphor Bronze)
- Recoil Locking Type (SUS304) UNF
Complementary Products
Customers Who Viewed This Item Also Viewed
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy