MenuClose
[Clean & Pack] Parallel Key
![[Clean & Pack] Parallel Key](http://content.misumi-ec.com/image/upload/t_product_main/v1/p/us/product/series/110310663839/110310663839_20230623140334.jpg?$product_main$)
- New Products
- Precision Cleaning
- Volume Discount is available
- Electrolytic Polishing + Precision Cleaning
- Degreasing
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
| ·Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
| ·Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
| ·Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
(i)Caution
- Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Edit Part Configuration
Part Number
Configure to get your Part Number
- Download Product Details
- CAD Data unavailable
Both Sides Round One Side Round
| Type | Body Material | Cleaning Method | |||||
| Both Sides Round | One Side Round | [ M ]Material | Tensile Strength | Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment |
| SL-KESS | SL-KEGS | 316 Stainless Steel | 600N/mm2 or More | Degreasing | General environment | Anti-rust packing | General environment |
| SH-KESS | SH-KEGS | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | ||
| SHD-KESS | SHD-KEGS | Electrolytic polishing + Precision cleaning | |||||
[ ! ]See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the specification table.
Specification Table
| Part Number | — | L |
| SL-KESS6 | — | 20 |
| SH-KESS8 | — | 25 |
| SHD-KEGS10 | — | 30 |
| L | Tolerance |
| Up to 10 | 0 －0.18 |
| 11 to 18 | 0 －0.18 |
| 19 to 30 | 0 －0.21 |
| 31 to 50 | 0 －0.25 |
| 51 to 80 | 0 －0.30 |
| 81 to 110 | 0 －0.35 |
| Part Number | L | H Tolerance | C | |||||||||||||||||||||||||||
| Type | Bh9 | |||||||||||||||||||||||||||||
| Both Sides Round SL-KESS SH-KESS SHD-KESS One Side Round SL-KEGS SH-KEGS SHD-KEGS | 2 | 0 －0.025 | 6 | 8 | 10 | 15 | 20 | 2 | 0 －0.025 | 0.16 to 0.25 | ||||||||||||||||||||
| 3 | 0 －0.025 | 6 | 8 | 10 | 12 | 15 | 16 | 18 | 20 | 25 | 30 | 3 | 0 －0.025 | 0.16 to 0.25 | ||||||||||||||||
| 4 | 0 －0.030 | 8 | 10 | 12 | 15 | 16 | 18 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 4 | 0 －0.030 | 0.16 to 0.25 | |||||||||||||
| 5 | 0 －0.030 | 10 | 12 | 15 | 16 | 18 | 20 | 22 | 25 | 28 | 30 | 32 | 35 | 40 | 45 | 50 | 55 | 60 | 5 | 0 －0.030 | 0.25 to 0.40 | |||||||||
| 6 | 0 －0.030 | 10 | 12 | 15 | 16 | 18 | 20 | 22 | 25 | 28 | 30 | 32 | 35 | 40 | 45 | 50 | 55 | 60 | 6 | 0 －0.030 | 0.25 to 0.40 | |||||||||
| 7 | 0 －0.036 | 15 | 20 | 22 | 25 | 28 | 30 | 32 | 35 | 40 | 45 | 50 | 60 | 70 | 7 | 0 －0.036 | 0.25 to 0.40 | |||||||||||||
| 8 | 0 －0.036 | 10 | 12 | 15 | 16 | 18 | 20 | 22 | 25 | 28 | 30 | 32 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 80 | 90 | 7 | 0 －0.090 | 0.25 to 0.40 | |||||
| 10 | 0 －0.036 | 15 | 16 | 18 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 80 | 90 | 8 | 0 －0.090 | 0.40 to 0.60 | ||||||||||
| 12 | 0 －0.043 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 80 | 90 | 8 | 0 －0.090 | 0.40 to 0.60 | |||||||||||||
| 14 | 0 －0.043 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 80 | 90 | 9 | 0 －0.090 | 0.40 to 0.60 | |||||||||||||||
| 15 | 0 －0.043 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 70 | 80 | 90 | 10 | 0 －0.090 | 0.40 to 0.60 | ||||||||||||||||
| 16 | 0 －0.043 | 40 | 45 | 50 | 55 | 60 | 70 | 80 | 90 | 100 | 10 | 0 －0.090 | 0.40 to 0.60 | |||||||||||||||||
| 18 | 0 －0.043 | 40 | 45 | 50 | 55 | 60 | 70 | 80 | 90 | 100 | 110 | 11 | 0 －0.110 | 0.40 to 0.60 | ||||||||||||||||
Cleaning Process·Degreasing (Part Number: SL-□□)
Working Environment: General environment
 |  |  | |  | |  |
| Alkaline warm pure water | Ultrasonic pure water cleaning after cleaning with pure water *3 times | Dry | Anti-rust single packing |
·Precision cleaning (Part Number: SH-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||
| |  | |  | | | |  |
Hydrocarbon cleaning Ro water cleaning | Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water) | Use pure water (13 MΩ·cm) | Use nitrogen blow | Conducted on a clean bench in a Class 10 clean environment | ||||
·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||||
 | |  | | | |  | | | | |
Hydrocarbon cleaning Ro water cleaning | Electrolytic polishing with an electrolytic polishing layer according to the material | Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water) | Use warm pure water (13 MΩ·cm) | Use nitrogen blow | Conducted on a clean bench in a Class 10 clean environment | |||||
Packaging Example| For degreasing: (Part Number: SL-□□)  | For precision cleaning or electrolytic polishing + precision cleaning: (Part Number: SH-□□/SHD-□□)  [ ! ]Both the first and second layer packaging are degassed. |
Cleaning Effectiveness / Recommended Environment for UseCleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Use Case and Process |
|---|---|---|---|---|---|
| Degreasing | SL-□□ | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| Precision cleaning | SH-□□ | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| Electrolytic polishing + precision cleaning | SHD-□□ | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
Days to Ship
●B2 to 12
Express service is not available
●B14 to 18
Express service is not available
Express service is not available
●B14 to 18
Express service is not available
Loading...
Basic Information
| Hole Machining | No Machining | Material | 316 Stainless Steel | Main Body Hardening | Not attached |
|---|---|---|---|---|---|
| Material Certificate | Available | Material Certificate: Material | SUS316 |
-
Shape
-
Parallel Key (with an end round) -
Parallel Key (with both ends round)
-
-
Width(mm)
-
Overall Length(mm)
-
End Shapes
- Both Sides Round
- One Side Square / One Side Round
-
Cleaning Process
- Degreasing
- Electrolytic Polishing + Precision Cleaning
- Precision Cleaning
-
Overall Length Change LC(mm)
-
type
- SH-KEGS
- SH-KESS
- SHD-KEGS
- SHD-KESS
- SL-KEGS
- SL-KESS
Days to Ship
-
- All
- 7 Days or Less
- 9 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Parallel Keys - Tapped, Counterbored Hole
- New JIS, Double-Rounded Key
- New JIS Double Square End Key
- SEIKI Machine Key, Key Material
- Double Square-ended Machine Key EA968ZD-11
- Double Square-ended Machine Key [Stainless Steel] EA968ZE-20
- Double Square-ended Machine Key [Stainless Steel] EA968ZE-22
- Standard Size Key
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy