Days to Ship |
|
---|
Connector Accessories - Housing Hood Kits, 17JE Series
DDK
The 17JE series hood kit.
[Features]
• Each hood is made of plastic, making them lightweight and compact.
• The plastic is nickel plated to provide effective EMI shielding.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Back Shell, CE01 Series
DDK
CE01 series back shell.
[Features]
• Back shells for holding cable when a conduit is not used.
• Two lengths are available (in shell sizes 22, 24, and 28) for different wiring needs.
• Use the back shells with cable clamps.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Cable Clamp, D/MS A/B Series Compatible, Waterproof
DDK
Waterproof cable clamp for round connector.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - D-Sub Locking Devices and Shells
JAE
This is a D sub series accessory.
[Features]
■Straight clamp plastic split type D * -C1 (C2)-J * model
• After making the connection, fix by turning both lock-side screws to join partnering sides with the latch fixing block.
• There are 3 types of match retention screws: M2.6, M3, and #4-40.
■Straight clamp plastic split type D * -C8-J * -B model
• The match retaining screws and corresponding connectors contain both short-type screws for use with a screw driver (flat or Phillips) as well as long-type screws for tightening by hand. Screws include both millimeter and inch measurement specifications.
• Split-type junction shell.
• D*-C1, D*-C2, D*-C8-junction shell (clamp hood) types include two-piece construction for easy access after wiring.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - MIXO Modular Tool Set
ILME
MIXO Modular Accessories. Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, USBs, and optical fiber, coaxial, and Dsub9Pin connectors.
[Features]
· MIXO modular accessories.
· Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, USBs, and optical fiber, coaxial, and Dsub9Pin connectors.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - MCS-MIDI Series Wire
WAGO
A tool for use with 231, 232, 721, 722, 723, 731, 732, and 769 Series spring connectors. Connecting and disconnecting wires is made easy by using this tool.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Configure Now
Ships as soon as | 4 Days |
---|
Connector Accessories - Cable Clamp, D/MS A/B Series Compatible
DDK
A non-waterproof round connector cable clamp accessory that securely affixes to an associate cable, cable jacket, or bundled wires in combination with a black shell. It is secured from both sides of the cable by two pressing brackets.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Back Shell for CE01 Series, Straight, Waterproof
DDK
Back shell for CE01 series connectors.
[Features]
・ A back shell used to hold cables when not using conduits
・ Please use it together with the waterproof cable clamp
[Applications]
・ The back shell is attached to the back of the connector, and the cable clamp is attached to the back of the back shell
Configure Now
Ships as soon as | 4 Days |
---|
Connector Accessories - D-Sub, Socket to Pin Converter
MISUMI
Accessory mountable to 2.3 mm panel thickness
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Cable Clamp, MS Series Compatible
MISUMI
Low Cost Type MS Cable Clamp
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Jack Screw for Camera Link Board Mounting
3M
A jack socket screw for Camera Link standard-compliant products
[Features]
· Supports Camera Link — the interface standard between CCD cameras and frame grabbers.
· A variety of connectors for assorted implementations—supporting board design.
· The jack socket screw provides secure panel attachment and cable connector mating.
Configure Now
Ships as soon as | 4 Days |
---|
Connector Accessories - Non-Shielded Shell Kit, Jack Screws
3M
[Features]
· Half-pitch I/O connector "Industry Standard Product" MDR system.
· Two mating and fixing systems. The jack screw and single-action locking systems can be used to match the application.
· Compatible with soldered plugs and ordinary pressure contact type plugs.
· The structure is comprised of two identically shaped pieces for ease of assembly and strength.
· The ground plate provides efficient shielding.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Sensor Tool, Murrlektronik Compatible
Murrelektronik
This tool allows efficient connection of MURR connectors. Use the product together with MURR-manufactured connector.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Installation/Removal Tool for MICRO/MINI/MIDI/X-COM
WAGO
You can use the operation tool for easy wiring and unwiring.
[Specifications]
●Applicable series: 733/734/769
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Aluminum Die Cast Clamp, Waterproof
MISUMI
Low Price M Thread Waterproof Clamp
Configure Now
Ships as soon as | 4 Days |
---|
Connector Accessories - Fixed Screw Components, D-Sub Compatible【2 Pieces Per Package】
MISUMI
• Color Material: Brass (Nickel Plated)
• Screw Size: 1-20UNEF
• Shape: Column
Configure Now
Ships as soon as | 4 Days |
---|
Connector Accessories - Gasket, D/MS Series Compatible
DDK
A gasket for Use with the D/MS Series
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Shell Kit
3M
[Features]
· An EMI shield by means of an internal metal shell.
· A single-action lock enables attaching/detaching of the connector by one hand.
· The structure uses two identical pieces to achieve both ease of assembly and strength.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Rubber Bushing, MS Series Compatible
MISUMI
Low Cost Type MS Cable Clamp Rubber Bushing
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Mounting Brackets, MR Series
Honda Tsushin Kogyo
Accessories for the MR series.
[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - N/MS Series Compatible Clamps, Shells, Receptacles, & Bushings
JAE
[Features]
· Accessories for the N/MS Series.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Strain Relief for Headers and Standard Sockets
3M
A 79XX Series strain relief for standard socket/header socket connectors.
[Features]
Compatible with various headers and plug connectors for standard sockets/headers.
▪ Available in 12 varieties of pin combinations from 10 pins to 64 pins.
▪ Also supports wiring by pressure contact with a 1.27-mm pitch flat cable, as well as a daisy chain.
· Prepared with a closed end type cover that prevents exposure of the cut surface of the cable as well as a low-profile strain relief that is 1.5 mm lower than a standard strain relief.
· Film-based extraction tabs can be attached for extraction (J3490-X).
▪ Accessory key can be used to prevent incorrect insertion between the same number of pins (J3435-0000).
Configure Now
Ships as soon as | 4 Days |
---|
Connector Accessories - Reinforcement Cover, CM10 Series
DDK
This is a CM10 series reinforcement cover
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Cable Clamp, DM/S Circular Series Compatible
DDK
Non-waterproof cable clamp for circular connectors.
[Features]
・ An accessory that fixes the cable in combination with the back shell.
・ Since the structure is such that it is tightened from both sides by the 2 pressing brackets, the cable is securely fixed at the center position.
・ Since the synthetic rubber bushings shown in the table are inserted into this cable clamp, it can also be used for cables with jackets and bundled wires.
[Applications]
・ The cable is fixed in combination with the back shell.
Configure Now
Ships as soon as | 4 Days |
---|
Connector Accessories - Cable Clamp, DM/S Circular Series Compatible, Waterproof
DDK
Circular connector waterproof cable clamp.
[Features]
・ It is used by attaching to waterproof D/MS, CE01, CE05 plug connectors.
[Applications]
・ It holds the cable and prevents water from getting inside the connector.
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
Connector Accessories - Cable Clamp, JL04 Series, CR/NBR
JAE
[Features]
▪ Accessories of JL04V series.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Back Shell, CE05 Series Compatible, Angled, Waterproof
DDK
This is a waterproof angle back shell for round connector
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Blank Plug, Han Series, Metal
HARTING
Allows blocking of hood and housing electrical wire entry ports (Models are separated using "-" rather than spaces).
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
Connector Accessories - Cable Clamp, Provertha D-Sub Compatible
Provertha
This is a cable clamp for the PROVERTHA D-sub hood. Please use this product with the PROVERTHA D-sub hood.
Configure Now
Ships as soon as | 4 Days |
---|
Connector Accessories - Jumper, Insulated, MCS-MIDI Series Compatible
WAGO
[Features]
● Commoning by adjoining jumpers.
● The connector plug remains commoned even after it is disconnected.
● By using this jumper bar, no additional on-site cables are required.
● Easy-to-configure connector circuitry supporting a variety of applications.
[Specifications]
● Applicable pin pitch: 5/5.08 mm ● Terminals: 2 ● Rated current: 12 A
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Covers for WINSTA 770 Series
WAGO
New spring-type 770 series connector lock-out cap, coding pin, dust cover, and more are available.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Receptacle Housing, Fastin-Faston 250 Series
TE Connectivity
An extremely popular TE product.
This product is an AMP connector (option/other).
Configure Now
Ships as soon as | 4 Days |
---|
Connector Accessories - Cable Clamp, Han Series, Heavy Duty, Waterproof
MISUMI
• Color Material: Brass (Nickel Plated)
• Screw Size: 1-20UNEF
• Nut Opposite-side Size (mm): 60
• Inner diameter of Attaching Clamp (mm): 32~38
• Weight (g): 53.03
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Polarity Key, D-Sub Compatible
HIROSE ELECTRIC
[Features]
▪ SM series (D-sub).
· A polarity key accessory.
Configure Now
Ships as soon as | 4 Days |
---|
Connector Accessories - Non-Shielded Shell Kit, Right Angle
3M
[Features]
· The highly requested 'dual-side attachment' and 'single-latch, single-screw attachment' types are now on sale as shell kits.
· Half-pitch I/O connector "Industry Standard Product" MDR system.
▪ Mating and fixing systems of jack screw and single-action lock, as well as single-action lock combined types from their combination that can be properly used according to the application .
· 60° right angle shell that achieves space savings with the cable extraction part.
· Compatible with soldered plugs and pressure contact type plugs.
· A two-piece structure to achieve both ease of assembly and strength.
· Ground plate for efficient shielding.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Receptacle Shell Kit, Wire Mounting
3M
[Features]
· Half-pitch I/O connector "Industry Standard Product" MDR system.
· Enables extended wire mounting receptacle connections between devices for relay purposes.
· Latching mechanisms on plug shells can be used without changing.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Lock Screw for Camera Link Panel Mounting
3M
[Features]
· A lock screw for use with the Mini-Camera Link standard-compliant panel-mounts.
Configure Now
Ships as soon as | 4 Days |
---|
Connector Accessories - Back Shell, CE02 Series, D/MS D190 Compatible
DDK
This is a CE02-6A, D/MS (D190) series back shell
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Cable Entry Protector, Han Series【1-4 Pieces Per Package】
HARTING
This accessory can be mounted to the cable entry of the hood to reduce the routing load of the wiring. It also helps to maintain the waterproof performance (Models are separated using "-" rather than spaces).
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Connector Accessories - Relay Box Sensor, Murrelektronik Compatible
Murrelektronik
This is a connector relay box for MURR connectors. Please use when integrating wiring.
Configure Now
Ships as soon as | 8 Days |
---|
Connector Accessories - Strain Relief Plate, MCS-MINI 734 Series Compatible
WAGO
Mounts to the MCS-MINI 734 Series connectors to relieve strain on the connected cables wires that are secured by Insulok cable ties.
[Specifications]
● Application: For use with CAGE CLAMP® and CAGE CLAMP® S male and female connectors
● Applicable pin pitch: 3.5 mm and 3.81 mm (2 types)
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Type |
| |||||||||||||||||||||||||||||||||||||||||||||
Brand | DDK | DDK | DDK | JAE | ILME | WAGO | DDK | DDK | ILME | DDK | MISUMI | MISUMI | 3M | 3M | Murrelektronik | WAGO | MISUMI | MISUMI | DDK | 3M | MISUMI | Honda Tsushin Kogyo | JAE | 3M | DDK | DDK | DDK | MISUMI | JAE | DDK | HARTING | ILME | Provertha | WAGO | WAGO | TE Connectivity | MISUMI | HIROSE ELECTRIC | 3M | 3M | 3M | DDK | HARTING | Murrelektronik | WAGO |
Product Series | Connector Accessories - Cable Clamp, D/MS A/B Series Compatible, Waterproof | Connector Accessories - Cable Clamp, D/MS A/B Series Compatible | Connector Accessories - Back Shell for CE01 Series, Straight, Waterproof | Connector Accessories - Jack Screw for Camera Link Board Mounting | Connector Accessories - Sensor Tool, Murrlektronik Compatible | Connector Accessories - Installation/Removal Tool for MICRO/MINI/MIDI/X-COM | Connector Accessories - Fixed Screw Components, D-Sub Compatible【2 Pieces Per Package】 | Connector Accessories - Rubber Bushing, MS Series Compatible | Connector Accessories - N/MS Series Compatible Clamps, Shells, Receptacles, & Bushings | Connector Accessories - Strain Relief for Headers and Standard Sockets | Connector Accessories - Cable Clamp, DM/S Circular Series Compatible | Connector Accessories - Cable Clamp, DM/S Circular Series Compatible, Waterproof | Connector Accessories - Back Shell, CE05 Series Compatible, Angled, Waterproof | Connector Accessories - Cable Clamp, Provertha D-Sub Compatible | Connector Accessories - Jumper, Insulated, MCS-MIDI Series Compatible | Connector Accessories - Receptacle Housing, Fastin-Faston 250 Series | Connector Accessories - Cable Clamp, Han Series, Heavy Duty, Waterproof | Connector Accessories - Lock Screw for Camera Link Panel Mounting | Connector Accessories - Back Shell, CE02 Series, D/MS D190 Compatible | Connector Accessories - Cable Entry Protector, Han Series【1-4 Pieces Per Package】 | Connector Accessories - Relay Box Sensor, Murrelektronik Compatible | Connector Accessories - Strain Relief Plate, MCS-MINI 734 Series Compatible | |||||||||||||||||||||||
CAD |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
Days to Ship |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included | 4 Days |
Same Day
Stock Items Included |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day
Stock Items Included | 4 Days | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included | 4 Days |
Same Day
Stock Items Included | 4 Days | 4 Days | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days | 4 Days | 4 Days |
Same Day
Stock Items Included |
Same Day
Stock Items Included | 4 Days |
Same Day Stock Items Included | 4 Days |
Same Day
Stock Items Included |
Same Day Stock Items Included | 4 Days |
Same Day
Stock Items Included |
Same Day Stock Items Included | 8 Days |
Same Day Stock Items Included |
Specifications |
|
|
| ||||||||||||||||||||||||||||||||||||||||||
Type | Hood | - | - | Hood / Connector Fastener / Other | Other | Other | Other | - | - | Hood | - | - | Connector Fastener | Hood | Other | Other | - | - | Other | Hood | - | Connector Fastener | Hood / Other | Other | Other | Other | Other | Other | Other | Other | Other | - | Other | Other | Hood | Housing | - | - | Hood | Hood | Connector Fastener | Hood | Other | Other | Other |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy