MenuClose
Interface Terminal Base (Round / Y Terminal Style)
| Days to Ship |
|
|---|
-
Toyogiken
[Features]
· The width of the main body is 40 mm in comparison to a DIN rail width of 35 mm.
· Boasts an even slimmer finish.
· The terminal block and connector are connected on the circuit board, helping prevent mis-wiring.
· The terminal number and connector number are wired 1-to-1.
· Circuits can be freely designed.
· Improves workability when using new screw types.
· If using a fork type terminal, the PCN series is without doubt the most effective option.
· A lever type which enables neat and tidy removal from rails.
· No tools required for removal, and so no need for wasted space on the backside of the main body.
· Compatible with both rail mounting and direct mounting.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Wire Distribution I/O Direct Connection Connector Terminal Block for FANUC Control
WAGO
[Features]
● No harness required. Direct coupling with FANUC distribution type I/O (-FN2, -FN)
● Increased wiring efficiency. Power can be passed horizontally (-FN2).
● A space saving design. Slim horizontal width & common (-FN2).
● Ideal for when adding units or making changes. No need to develop a specialized circuit board (-FN2 and -FN).
● Simple to use. 1-to-1 circuitConfigure Now
Ships as soon as 4 Days -
PLC Connector Terminal Block - Mitsubishi Electric, for Input and Output
MISUMI
Connector terminal block that can be directly connected to Mitsubishi Electric PLCs
- Good for connection in control boards
- Space-saving
- Uses connector standards used for PLC
- Rated Voltage 125 V
Configure Now
Ships as soon as 4 Days -
Interface Terminal Block - MIL Connectors
MISUMI
Screw hold mechanism with spring-type terminal block equipped with MIL socket connectors
- Spec Expansion
- Good for connection in control boards
- Space-saving
- Uses connector standards used for PLC
- Rated Voltage 125 V
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
PCR Connector Terminal Block - MWI Series, Terminal Pitch 8.5mm
MISUMI
Terminal block equipped with PCR connectors that are frequently used on I/O boards
- Meets UL standards based on Canadian standards
- Wire connection by using crimp terminals
- Rated Voltage 125 V
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
FANUC Operation Board I/O Connector Terminal Block for FANUC Control
WAGO
[Features]
● Pins no. 47 to 50 are common. Ideal for FANUC operations board I/O.
● Increased wiring efficiency. Power supply horizontal pass is possible
● Space saving. 50 pole 3.5 mm terminal block.
● A size that allows for it to be inserted even into tight spaces. Designed so as not to be too tall.Configure Now
Ships as soon as 4 Days -
Interface Terminal Block - MWI Series, MIL Connector
MISUMI
Terminal block with selectable MIL socket connector name plate
- Meets UL standards based on Canadian standards
- Space-saving
- Used for sensor connection
- Uses connector standards used for PLC
- Rated Voltage 125 V
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Toyogiken
An ultra small size with a pitch between terminals of just 7 mm. Ideal for size reducing PLC or SBC interfaces. A compact type for helping reduce the size of control panels.
[Features]
· An ultra small size with a pitch between terminals of just 7 mm.
· Ideal for size reducing PLC or SBC interfaces.
· A compact type for helping reduce the size of control panels.
· The connector and terminal block are easy-to-handle 1:1 wire connection types.
· Uses SS terminal screws for easy wiring.
· Structured to prevent screws from dropping out and becoming lost.
· The terminal is an open/close type and is pre-equipped with a name plate featuring the terminal number on both sides. Designed for greater efficiency during wiring.
· Compatible with both DNI rail mounting and direct mounting methods.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
IM Series IM-M/IMF MIL/FCN Connector Terminal Block for Control Panel
WAGO
[Features]
● Simple to use. 1-to-1 circuit
● Industry standard. Connector: MIL, FCN (AMP)
● Wide product lineup. Terminal blocks with a pitch of 3.5 mm or 5 mm
● New to the product lineup. The "-KV" for KEYENCE PLC CPUs is also available
● Improved reliability. Features a cage clamp connection that is strong against vibration.Configure Now
Ships as soon as Same Day Stock Items Included
-
Interface Terminal Block - Input/Output, Round and Y Terminals
MISUMI
Screw hold mechanism with spring-type terminal block that can be directly connected to Mitsubishi Electric PLCs
- Good for connection in control boards
- Space-saving
- Uses connector standards used for PLC
- Rated Voltage 125 V
Configure Now
Ships as soon as Same Day Stock Items Included
-
IM Series IM-DSF Dsub Female Connector Terminal Block for Control Panel
WAGO
[Features]
● Simple to use. 1-to-1 circuit
● A wide range of wire connections. A 5 mm pitch terminal block.
● Industry standard. An international standard Dsub connector.
● For large current applications. Convenient for 3 A energizing
● Ideal for EMC audits, etc. Equipped with a shield terminal block.Configure Now
Ships as soon as 4 Days -
FCN Connector Center Insert Terminal Block - 7.62mm Pitch - PX7DS Series
MISUMI
Space-saving 7.62 mm pitch FCN connector type
- Meets UL requirements
- Meets CSA (Canadian Standards Association standards)
- Suitable for signal
- Used for sensor connection
- Uses connector standards used for PLC
- Rated Voltage 125 V
Configure Now
Ships as soon as Same Day Stock Items Included
-
for Control Panel, IM Series, Half-Pitch MDR Connector Terminal Block
WAGO
[Features]
● Simple to use. 1-to-1 circuit
● An ultra small type. A 3.5 mm pitch terminal block.
● Industry standard. An MDR connector used as standard in servo amplifiers.
● Ideal for shield processing and EMC audits, etc. Equipped with a shield terminal block.Configure Now
Ships as soon as 4 Days -
- New Products
PLC Connector Terminal Block for KEYENCE KV, KV Nano
MISUMI
[New Product] PLC terminal block compatible with KEYENCE KV Nano input/output units with combined common terminal block
- Good for connection in control boards
- Space-saving
- Uses connector standards used for PLC
- Rated Voltage 125 V
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Interface Terminal Block - Input, Round and Y Terminals
MISUMI
Input terminal block that can be directly connected to OMRON PLCs
- Good for connection in control boards
- Space-saving
- Uses connector standards used for PLC
- Rated Voltage 125 V
Configure Now
Ships as soon as Same Day Stock Items Included
-
MDR Terminal Block - PCN Series, Terminal Pitch 7.62mm
MISUMI
IEEE1284 (MDR) Connector Installation
- Suitable for signal
- Used for sensor connection
- Uses connector standards used for PLC
Configure Now
Ships as soon as Same Day Stock Items Included
-
Interface Terminal Block, Slim Terminal Block, 7-mm Pitch
Kasuga Electric Works
Uses M3 screws and boasts the smallest pitch in the industry and just 7 mm. Designed to help improve space saving measures, even when compared with the TIFA7 series.
[Features]
· A slim type from the TIFA series. Available with different numbers of poles.
· A product series designed for improved space saving measured. Compared with the TIFA7 series, the amount of space required for installation has been reduced by approximately 12%.
· As well as self-up screw types, types which use a fall prevention screw structure that ensures the screws will not fall off, even if the terminal block is turned upside down, are also available.
· The KASUGA interface terminal block is available in a number of variations for use in different applications.
· Compliant with RoHS directives.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
PLC Connector Terminal Block - OMRON, for Output
MISUMI
Output terminal block that can be directly connected to OMRON PLCs
- Good for connection in control boards
- Space-saving
- Uses connector standards used for PLC
- Rated Voltage 125 V
Configure Now
Ships as soon as Same Day Stock Items Included
-
PX7DS Series FCN Connector Terminal Block (Horizontal Insert / Terminal Pitch: 7.62 mm)
Toho Technology
A 7.62 mm pitch type. Ideal for times when there are height restrictions.
[Features]
· Equipped with a common terminal block for each power supply and signal, and so no external relay terminal block required.
· A variety of models are available which support PLCs and NCs from a variety of companies.
· Self-up and screw-up types are available.Configure Now
Ships as soon as Same Day Stock Items Included
-
WAGO
[Features]
● Simple connection. Push-in type wire connection.
● No harness required. Direct coupling with FANUC distribution type I/O.
● Increased wiring efficiency. Power supply horizontal pass is possible
● Space saving. Slim horizontal width & common
● Shorter on-site wire connection work. Quick connect terminal block
● Ideal for when adding units or making changes. No need to develop a specialized circuit board.Configure Now
Ships as soon as 4 Days -
Interface Terminal Block - Input, Round Terminal
MISUMI
Input terminal block that can be directly connected to OMRON PLCs
- Good for connection in control boards
- Space-saving
- Uses connector standards used for PLC
- Rated Voltage 125 V
Configure Now
Ships as soon as 4 Days -
Interface Terminal Block - Screw Hold, MWS Series, MDR Connectors
MISUMI
Screw hold mechanism with spring-type terminal block equipped with MDR connectors
- Connected to an AC servo motor
- Rated Voltage 125 V
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Configure Now
Ships as soon as 7 Days -
D-Sub Connector Side Insert Terminal Block - 7.62mm Pitch - PX7DS Series
MISUMI
Captive screw 1/2 space D-sub connector type
- Meets UL requirements
- Meets CSA (Canadian Standards Association standards)
- Suitable for signal
- Used for sensor connection
- Uses connector standards used for PLC
Configure Now
Ships as soon as 4 Days -
FCN 40 Core Upper/Lower Connectors - MWI Series
MISUMI
Terminal block with FCN 40 core connectors wired separately in the upper and lower levels
- Suitable for signal
- Used for sensor connection
- Uses connector standards used for PLC
Configure Now
Ships as soon as 4 Days -
Connector Terminal Block Conversion Unit XW2R (PLC Connection Type)
OMRON
Connector-terminal block conversion units designed specifically to connect PLCs.
[Features]
· Wiring patterns that are specifically designed for PLCs reduce the work required for signal pattern recognition.
· Terminal block signal labels give the PLC addresses.
· Models available with Phillips screw, slotted screw, push-in, or e-CON connections.
· Models available with and without power supply terminals.
· Can be mounted to a DIN Track.
[Applications]
· Use for applications where input from various types of input devices such as sensors are connected and converted, then input to a PLC.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Interface Terminal Block - Screw Hold, MWS Series, D-Sub Connectors
MISUMI
Screw hold mechanism with spring-type terminal block equipped with D-sub connectors
- Good for connection in control boards
- Space-saving
- Uses connector standards used for PLC
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Terminal Block - PX7DW Series, Terminal Pitch 7.62mm
MISUMI
MIL Connector Screw Type
- Meets UL requirements
- Meets CSA (Canadian Standards Association standards)
- Suitable for signal
- Used for sensor connection
- Uses connector standards used for PLC
Configure Now
Ships as soon as 4 Days -
Centronics Terminal Block - MWI Series, Terminal Pitch 7mm
MISUMI
Centro connector-equipped terminal block with 7 mm pitch between terminals
- Suitable for signal
- Used for sensor connection
- Rated Voltage 125 V
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
KWI Series Terminal Block - MIL Connector, Terminal Pitch 7mm
MISUMI
Low price, high-functioning MIL connector type
- Good for connection in control boards
- Space-saving
- Uses connector standards used for PLC
- Rated Voltage 125 V
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
PX7DW Series FCN Connector Terminal Block (Center Insertion/Terminal Pitch: 7.62 mm)
Toho Technology
A space saving 7.62 mm pitch FCN connector type terminal block.
Configure Now
Ships as soon as Same Day Stock Items Included
-
Connector Terminal Block Conversion Unit (Standard Type) XW2B (Standard Type)
OMRON
A terminal block for reducing control panel wiring for input devices with easy conversion between connector and terminal block.
[Features]
· Mount to a DIN track or via screws.
· MIL flat cable connectors and multi-pole, square connectors are standard.
· Terminal blocks available with either M3 or M3.5 screws.
· Only for the manufacturer programmable controller.
[Applications]
· Optimal for reducing the size of equipment and boards.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
PM-32 Series Ultra-Small Terminal Block for Control Panels
WAGO
A best selling ultra-small terminal block connector with proven results for use in smaller control panels to help reduce the amount of wiring required.
[Features]
● A horizontal width of just 77 mm.
● The signal and common terminal blocks are colored for easier differentiation.
● Uses a cage clamp mechanism to prevent wires from becoming loose.
● Does not require a stopper when used with aluminum DIN rails.Configure Now
Ships as soon as 4 Days -
MIL Socket Upper/Lower Terminal Block - MWI Series
MISUMI
Terminal block with MIL socket connectors wired separately in the upper and lower levels
- Meets UL requirements
- Good for connection in control boards
- Space-saving
- Used for sensor connection
- Uses connector standards used for PLC
- Rated Voltage 125 V
Configure Now
Ships as soon as 4 Days -
Connector Terminal Block for OMRON PLCs
MISUMI
Output terminal block that can be directly connected to OMRON PLCs
- Good for connection in control boards
- Space-saving
- Uses connector standards used for PLC
- Rated Voltage 125 V
Configure Now
Ships as soon as 4 Days -
Interface Terminal Block - FCN Connectors
MISUMI
Screw hold mechanism with spring-type terminal block equipped with FCN40 core connectors
- Good for connection in control boards
- Space-saving
- Uses connector standards used for PLC
- Rated Voltage 125 V
Configure Now
Ships as soon as Same Day Stock Items Included
-
Interface Terminal Block - Screw Hold, MWS Series, Centronics Connectors
MISUMI
Screw hold mechanism with spring-type terminal block equipped with Centro connectors
- Suitable for signal
- Used for sensor connection
- Rated Voltage 125 V
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Servo Amplifier Relay Terminal Block for Mitsubishi Electric Products
MISUMI
Connector Terminal Block for Mitsubishi Servo Amplifier Relay
Configure Now
Ships as soon as 4 Days -
- New Products
Interface Terminal Block - Input/Output, 40 Pole
MISUMI
[New Product] 8 pole + 32 PLC signal common terminal block incorporated into a 40 pole terminal block
- Good for connection in control boards
- Space-saving
- Uses connector standards used for PLC
- Rated Voltage 125 V
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
D-Sub Connector - 7 mm Pitch, MWI Series
MISUMI
D-sub connector-equipped terminal block with 7 mm pitch between terminals
- Suitable for signal
- Uses connector standards used for PLC
- Rated Voltage 125 V
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
FCN Terminal Block - MWI Series, Terminal Pitch 7mm
MISUMI
FCN connector-equipped terminal block with 7 mm pitch between terminals
- Suitable for signal
- Used for sensor connection
- Uses connector standards used for PLC
- Rated Voltage 125 V
Configure Now
Ships as soon as Same Day Stock Items Included
-
Clutch Lock Y Terminal, Dedicated - Round Terminal
Kasuga Electric Works
Use a screwdriver to insert crimp terminals (round/Y types) or to remove wiring and wires. Release the wires by pressing the release button (labor-saving design). A compact type terminal with a pitch of just 5 mm (space saving design).
[Features]
· A clutch lock (screw-less) type with 1-to-1 wiring (screw-less type). Dedicated connection for crimp terminals.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Toyogiken
[Features]
· The PCI series is compatible with the main Mitsubishi and OMRON sequencers (forDC5V to 24V).
· A slim design with a main body width of just 40 mm. For use with 35 mm wide DIN rails.Configure Now
Ships as soon as 4 Days -
Connector Terminal Block Conversion Unit XW2R (for general purpose use)
OMRON
[Features]
· A general purpose type connector terminal block conversion unit that can be used for saving on the amount of wiring required in a variety of measures.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Connector Terminal Block Conversion Unit (Common Type) XW2C-20G5-IN16
OMRON
A connector-terminal block conversion unit which reduces the control panel wiring needed for input devices.
[Features]
· Power supply common terminal and LED operation indicators reduce control panel wiring for input devices.
· Power supply common provided for input devices.
· LEDs indicate at a glance whether input signals are ON or OFF.
· Mounts to a DIN track or via screws.
· Dedicated connecting cable available (sold separately).
[Applications]
· Use to reduce control panel wiring.- Volume Discount is available
Configure Now
Ships as soon as 4 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Connector |
| Terminal Block Screw |
| Number of Electrodes |
| Mounting Method |
| Pitch Between Terminal(mm) |
| Supported Equipment |
| Supported Equipment Manufacturer |
| Representative Standard |
| Height(mm) |
| Width(mm) |
| Depth(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Toyogiken | WAGO | MISUMI | MISUMI | MISUMI | WAGO | MISUMI | Toyogiken | WAGO | MISUMI | WAGO | MISUMI | WAGO | MISUMI | MISUMI | MISUMI | Kasuga Electric Works | MISUMI | Toho Technology | WAGO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OMRON | MISUMI | MISUMI | MISUMI | MISUMI | Toho Technology | OMRON | WAGO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Kasuga Electric Works | Toyogiken | OMRON | OMRON |
| Product Series | Wire Distribution I/O Direct Connection Connector Terminal Block for FANUC Control | PLC Connector Terminal Block - Mitsubishi Electric, for Input and Output | PCR Connector Terminal Block - MWI Series, Terminal Pitch 8.5mm | FANUC Operation Board I/O Connector Terminal Block for FANUC Control | IM Series IM-M/IMF MIL/FCN Connector Terminal Block for Control Panel | Interface Terminal Block - Input/Output, Round and Y Terminals | IM Series IM-DSF Dsub Female Connector Terminal Block for Control Panel | FCN Connector Center Insert Terminal Block - 7.62mm Pitch - PX7DS Series | for Control Panel, IM Series, Half-Pitch MDR Connector Terminal Block | PX7DS Series FCN Connector Terminal Block (Horizontal Insert / Terminal Pitch: 7.62 mm) | Interface Terminal Block - Screw Hold, MWS Series, MDR Connectors | D-Sub Connector Side Insert Terminal Block - 7.62mm Pitch - PX7DS Series | Connector Terminal Block Conversion Unit XW2R (PLC Connection Type) | Interface Terminal Block - Screw Hold, MWS Series, D-Sub Connectors | KWI Series Terminal Block - MIL Connector, Terminal Pitch 7mm | PX7DW Series FCN Connector Terminal Block (Center Insertion/Terminal Pitch: 7.62 mm) | Connector Terminal Block Conversion Unit (Standard Type) XW2B (Standard Type) | Interface Terminal Block - Screw Hold, MWS Series, Centronics Connectors | Servo Amplifier Relay Terminal Block for Mitsubishi Electric Products | Connector Terminal Block Conversion Unit XW2R (for general purpose use) | Connector Terminal Block Conversion Unit (Common Type) XW2C-20G5-IN16 | ||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||
| Days to Ship |
Same Day Stock Items Included | 4 Days | 4 Days |
Same Day
Stock Items Included |
Same Day
Stock Items Included | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included | 4 Days |
Same Day
Stock Items Included | 4 Days |
Same Day
Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included | 4 Days |
Same Day
Stock Items Included |
Same Day
Stock Items Included | 4 Days | 4 Days |
Same Day
Stock Items Included | 7 Days | 4 Days | 4 Days | 4 Days |
Same Day
Stock Items Included | 4 Days |
Same Day
Stock Items Included | 4 Days |
Same Day
Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days |
Same Day
Stock Items Included |
Same Day
Stock Items Included | 4 Days |
Same Day
Stock Items Included | 4 Days |
Same Day
Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||
| Connector | MIL connector / FCN connector / MR connector / D-sub connector / MDR connector / Other | Other | FCN connector | MIL connector | Other | MIL connector | MIL connector | MIL connector / FCN connector / MR connector / D-sub connector / Other | MIL connector / FCN connector | MIL connector / FCN connector | D-sub connector | FCN connector | MDR connector | MIL connector | MIL connector | MDR connector | MIL connector / Other | MIL connector | FCN connector | Other | MIL connector / FCN connector | MDR connector | Other | D-sub connector | MIL connector | MIL connector | D-sub connector | MIL connector | Centronics connector | MIL connector | FCN connector | MIL connector / Other | MIL connector | MIL connector | MIL connector / FCN connector | FCN connector | Centronics connector | Other | MIL connector / FCN connector | D-sub connector | FCN connector | MIL connector / FCN connector / Other | MIL connector | MIL connector / FCN connector | MIL connector |
| Terminal Block Screw | M3 | - | M3 | M3 | M3.5 | - | M3 | M3 | - | M3 | - | M3 | - | M3 | M3 | M3 | M3 | M3 | M3 | - | M3 | M3 | M3 | M3 | M3 | Other | M3 | M3 | M3 | M3 | M3 | M3 / M3.5 | - | M3 | M3 | M3 | M3 | M3 | M3 | M3 | M3 | - | M3 | Other | M3.5 |
| Number of Electrodes | 20 ～ 50 | - | 40 | 20 ～ 50 | 68 ～ 96 | 50 | 20 ～ 40 | 20 ～ 50 | 20 ～ 50 | 40 | 15 ～ 37 | 40 | 20 ～ 50 | 40 | 40 | 20 ～ 50 | 20 ～ 40 | 40 | 40 | - | 40 | 50 | 10 | 37 | 40 | 34 ～ 40 | 25 ～ 37 | 34 ～ 50 | 50 | 20 ～ 40 | 40 | 20 ～ 50 | 32 | 34 ～ 40 | 40 | 40 | 24 ～ 50 | 10 ～ 20 | 40 | 25 ～ 37 | 40 | 20 ～ 50 | 20 | 20 ～ 50 | 20 |
| Mounting Method | DIN rail/Direct attachment | Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | With DIN rail | DIN rail/Direct attachment | With DIN rail | DIN rail/Direct attachment | With DIN rail | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | Other | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | Other | With DIN rail | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | DIN rail/Direct attachment | With DIN rail | Other | Other |
| Pitch Between Terminal(mm) | 7.62 | 3.5 | 7 | 7 | 8.5 | 3.5 | 7 | 7 | 3.5 ～ 5 | 7 | 5 | 7.62 | 3.5 | 7 | 7 | 7.62 | 7 | 7 | 7.62 | 5 | 7 | 7 | 7.62 | 7.62 | 7 | 5 ～ 7 | 7 | 7.62 | 7 | 7 | 7.62 | 5.08 ～ 8.5 | 3.5 | 7 | 7 | 7 | 7 | 7.62 | 7 | 7 | 7 | 5 | 7.62 | 5 ～ 7 | 8.5 |
| Supported Equipment | Other | - | PLC | PLC / Servomotor | I/O board | - | PLC | PLC / I/O board | PLC | PLC | - | PLC | - | PLC | PLC | Servomotor | PLC / Other | PLC | PLC | - | PLC | Servomotor | Other | PLC | PLC | - | PLC | PLC / Servomotor | Servomotor | PLC | PLC | - | PLC | PLC | PLC | PLC | Servomotor | Servomotor | PLC | PLC | PLC | PLC / Servomotor / Other | PLC | - | - |
| Supported Equipment Manufacturer | Mitsubishi Electric / Omron / Panasonic Electronic Works / Keyence | - | Mitsubishi Electric | Mitsubishi Electric / Omron / Yasukawa Electric / Panasonic Electronic Works / Keyence | - | - | Mitsubishi Electric / Omron / Keyence | Mitsubishi Electric / Omron / Panasonic Electronic Works / Keyence | Keyence | Mitsubishi Electric | - | Mitsubishi Electric / Omron | - | Keyence | Omron | - | Mitsubishi Electric / Omron / Panasonic Electronic Works / Keyence | Omron | - | - | Omron | - | - | - | - | Mitsubishi Electric / Omron / Keyence | - | - | - | - | Mitsubishi Electric / Omron | - | Mitsubishi Electric / Omron / Keyence | - | Omron | Mitsubishi Electric / Omron | - | Mitsubishi Electric | Mitsubishi Electric | Mitsubishi Electric | - | Mitsubishi Electric / Omron / Panasonic Electronic Works / Keyence | Mitsubishi Electric / Omron | - | - |
| Representative Standard | UL / CUL / TUV | - | - | - | CUL | - | CUL | UL / CUL / TUV | - | - | - | UL / CSA | - | - | - | - | CE / UL / CUL / CSA | - | UL / CSA | - | - | - | - | UL / CSA | - | - | - | UL / CSA | - | - | UL / CSA | - | - | UL | - | - | - | - | - | - | - | CE / UL | UL / CUL / TUV | - | - |
| Height(mm) | 40 | 27.3 | 42 | 42 | 64 | 41.6 | 41.5 | 40 | 22.6 ～ 38.3 | 42 | 27.1 | 64 | 31.1 | 42 | 42 | 36 | 40 | 42 | 43.2 | 32 | 42 | 50.7 | 64 | 64 | 86 | 33.4 ～ 48.35 | 50.7 | 64 | 49 | 42 | 64 | 38.1 ～ 43.8 | 41.3 | 86 | 42 | 42 | 50.7 | 64 | 42 | 49 | 41.5 | 59 | 40 | 33.4 ～ 48.35 | 35 |
| Width(mm) | 86 ～ 200 | 31.5 | 129 | 76 ～ 181 | 219.55 | 95 | 80 ～ 150 | 80 ～ 184 | 52 ～ 132 | 125 | 48 ～ 102 | 101.21 | 46 ～ 100 | 145.5 | 125 | 86 ～ 200 | 80 ～ 150 | 125 | 158.4 | 31.5 | 129 | 180.5 | 63 | 101.21 | 80 | 98.5 ～ 151.7 | 96.5 ～ 138.5 | 101.21 ～ 139.31 | 185 | 80 ～ 150 | 101.21 | 67.5 ～ 247.5 | 77 | 80 | 129 | 146 | 89.5 ～ 180.5 | 63 | 125 | 101 ～ 150 | 150 | 55 ～ 130 | 162 | 64.4 ～ 186.7 | 160 |
| Depth(mm) | 36 ～ 43 | 144 | 42.4 | 51 | 35.5 | 55 | 42.5 | 36 ～ 36.8 | 55 | 51 | 55 | 48 | 55 | 51 | 51 | 40 | 42.3 | 51 | 54.8 | 151 | 42.4 | 47.6 | 36.5 | 48 | 42.5 | 50 | 47.6 | 48 | 45 | 42.5 | 48 | 45 | 55 | 42.5 | 42.4 | 51 | 47.6 | 36.5 | 51 | 45 | 42.5 | 42 | 36.8 | 50 | 50 |
Loading...
Configure
Filters
-
Connector
-
Terminal Block Screw
-
Metric / Inch
-
Number of Electrodes
-
Mounting Method
-
Pitch Between Terminal(mm)
-
Supported Equipment
-
Supported Equipment Manufacturer
-
Representative Standard
-
Height(mm)
-
Width(mm)
-
Depth(mm)
Brand
CAD
-
- 2D
- 3D
Related Categories to Interface Terminal Base (Round / Y Terminal Style)
-
- Common Terminal Blocks
- Insulated Terminal Block Covers
- Interface Terminal Base (Round / Y Terminal Style)
- Jumper Bars
- Legend Plates & Markers
- Sensor Terminals & Distribution Blocks
- Terminal Block Accessories
- Terminal Block End Plates
- Terminal Blocks for Pin Terminals
- Terminal Blocks for Ring & Spade Terminals
- Terminal Block Interfaces for Pin Terminals
- Terminal Block Stoppers
-
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy