Terminal Block Enclosures

• 

  Terminal Block Enclosure - BOXTM-100 Series, PBT Resin, Oil/Chemical-Resistant

  Toyogiken

  The BOXTM series terminal box integrates both the enclosure and terminal block into a single part allowing for a more compact and lightweight product, making it ideal for storing devices such as sensor amplifiers.
  
  [Features]
  ・Made of reinforced PBT plastic resin.
  ・Oil and chemical resistant.
  ・Choose from upper, lower, or independent pole configurations.
  ・10 pin electrode variation available.
  ・IP65 environmental rating.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Terminal Block Enclosure - TMB Series, Waterproof

  Takachi Electronics Enclosure

  Terminal Box (TMB)
  
  [Features]
  - This terminal box features an integrated box and terminal block.
  · Waterproofing and dustproofing grade of IP65.
  · The case is made of flame retardant ABS resin (UL94V-0).
  · The TMB-4P / 6P / 10P include a ⌀21 knockout.
  · When opening a hole, place a flat screwdriver in the position indicated in the following diagram and hit it hard with a hammer etc.

  • Volume Discount is available

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Terminal Block Enclosure - BOXTC Series, Resin

  Toyogiken

  The TC series relay box integrates both the enclosure and terminal block into a single part allowing for a more compact and lightweight product. This makes it ideal for wiring relay sensors and solenoids.
  
  [Features]
  ・4 or 6 pin electrode variations available.
  ・IP65 environmental rating.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Terminal Block Enclosure - BOXTM-40 Series, Resin

  Toyogiken

  The 40□ series is a plastic terminal box that matches industrial facilities. The box unit and terminal unit are integrated, so you can experience the benefits in various work processes.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Terminal Block Enclosure - BOXTM-200 Series, Resin

  Toyogiken

  Uses highly durable and chemically resistant PBT (UL94-0) in its insulation materials outside the box main body.
  
  [Features]
  · 20 terminal blocks are mounted inside the BOX.
  · No machining has been performed on the BOX, so use after drilling as the specifications require.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Terminal Block Enclosure - BOXTM-80 Series, Resin

  Toyogiken

  [Features]
  · The 80 Series is a plastic terminal box that is a good match for industrial facilities.
  · The box main body and the terminal unit are combined into a single unit, allowing users to really feel benefits in all aspects of their work processes.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Terminal Block Enclosure - Relay Box, JB-WLQ Series, PBT Resin, Waterproof

  OHM Electric

  The neat and easy way to store sensor amplifiers and terminal blocks. Makes construction and maintenance jobs considerably easier.
  Oil-resistant and weatherproof. Use for a variety of applications. Models provided a terminal block and pressure-adjustment plug also available.
  
  [Features]
  - Opens and closes at a single touch. Secured with a single screw, saving time and effort to open and close.
  - The hinged lid is attached to the main body, ensuring it will never fall off.
  - The hinged design and IP67-grade protective structure stops water and dust from entering the interior.
  - Transparent polyarylate lid with excellent chemical resistance. View the interior without opening the lid.
  * Available with a transparent lid (in brown) or a beige-colored lid (made from PBT resin).
  - Two types of lid are available: high-roof or low-roof. Select the lid height to suit your storage needs.
  - Hole-punching location is pre-marked, saving you the trouble of doing the marking-off yourself and increasing work efficiency.
  - Wide choice of models. Models with a terminal block, DIN rail, pressure-adjustment plug and hole are available.
  [Box size]
  - JB-WLQ100BJ series: Width 120mm x length 116mm x height 74mm
  - JB-WLQ135BJ series: Width 135mm x length 151mm x height 82 (121)mm
  - JB-WLQ220BJ series: Width 220mm x length 151mm x height 82 (121)mm
  *Figures shown in brackets refer to high-roof lid models.

  Configure Now

  Ships as soon as	4 Days

• 

  Terminal Block Enclosure - Relay Box, W Series, Nylon

  OHM Electric

  Classic Relay Box
  
  [Features]
  · Integrated cap-cone and terminal block.
  · Comes ready-to-use.
  - Number of terminal block poles: 5P, 7P, 11P

  • Volume Discount is available

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Terminal Block Enclosure - TMC Series, Water/Dustproof

  Takachi Electronics Enclosure

  [Features]
  • This terminal box consists of a cable ground built together with a terminal mount.
  • Direct terminal box ideal for industrial equipment and construction machines power cables, motor relays, and sensor relays.
  • The protection level corresponds to IP65, and the box material is made from oil-resistant PBT.
  • The terminal mount can be chosen from 3P, 4P, and 6P varieties.
  • The cable rubber bush includes both ⌀5 and ⌀7.4 varieties.

  • Volume Discount is available

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Terminal Block Enclosure - TMA Series, Die-Cast Aluminum

  Takachi Electronics Enclosure

  [Features]
  · This is an aluminum die-cast terminal box which exhibits superior shock resistance corresponding to protection class IP65.
  Aluminum die-cast construction is superior to resin in terms of heat dissipation, heat resistance, and oil resistance.
  · Terminal lead number ranges from 6P to 30P, and a total of 6 sizes are available.

  • Volume Discount is available

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Terminal Block Enclosure - Relay Box, JB-WST Series, Waterproof

  OHM Electric

  Conforms to protection grade IP67. Slim and compact multi-function type. For relaying sensor wires in spaces where there are height restrictions.
  
  [Features]
  · While slim and compact, the opposing terminal screw specification provides a greater range of applications.
  · The lid is fixed at 2 points so the duration of work can be shortened. (Excluding JB-WST306 (E))
  · Possible to install in narrow places such as frames which are otherwise difficult using only conventional mounting holes. * Hole drilling required
  · It can conform to IP67 by using seal washers. (See the catalog PDF for recommended seal washers)

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Terminal Block Enclosure - Relay Box, WS Series, Nylon【1-10 Pieces Per Package】

  OHM Electric

  For relay of sensor lines
  
  [Features]
  · Integrated cap-cone and terminal block.
  · Comes ready-to-use.
  · Can be installed in narrow spaces thanks to its compact size.
  · Number of terminal block leads: 3P, 4P, 7P

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Terminal Block Enclosure - Relay Box, WG Series, Nylon

  OHM Electric

  For flexible and sensor wiring relays
  
  [Features]
  · Conforms to IP67 protective structure requirements (lid is waterproof and the wire insertion opening uses a mounting connector).
  · Number of terminal block leads: 6P

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Terminal Block Enclosure - BOXTM-22 Series, Resin

  Toyogiken

  The 22 series is available with several variants such as high and low lid, transparent and opaque, etc. This allows combinations to be made freely.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Terminal Block Enclosure - BOXTM-11 Series, Resin

  Toyogiken

  The 11 series is available with several variants such as high and low lid, transparent and opaque, etc. This allows combinations to be made freely.

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Terminal Block Enclosure - BOXTM-6 Series, Resin

  Toyogiken

  The 6 series is available with several variants such as high and low lid, transparent and opaque lid. This allows combinations to be made freely.
  
  [Features]
  · The new BOXTM Series can be used with myriad diverse applications.
  - PBT is used with resin specifications that have excellent oil and chemical resistance (non-transparent type).
  · Can be mounted to a DIN 35 mm rail (in the same way as BOXTB).
  · Waterproof properties also allow for use in adverse environments (IP65 rating).
  · There are many types of open-hole lids for a wide range of uses.
  · Multiple variations of covers.
  · Uses tall and short types.
  · Uses transparent and opaque types of materials.
  - Space saving and removable terminal block.
  · The terminal block has one screw per terminal and uses a spring-up mechanism. This enables a further 25% space saving in comparison to previous models.

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Terminal Block Enclosure - JPB Series, Nylon, Waterproof

  Kasuga Electric Works

  [Features]
  · A nylon alloy is used made from a resin material with superior weather and oil resistance.
  · Lowering the case-side wall from the terminal portion results in a structure that enables easy wiring.
  · A nameplate can be affixed to the flat space on the cover.
  · Protection structure IP67.

  Configure Now

  Ships as soon as	4 Days

• 

  Terminal Block Enclosure - BOXTB Series, Resin

  Toyogiken

  [Features]
  · The box main body and the terminal block use a PBT resin with superior environmental properties.
  · Because the terminal block and the dividing plate are removable, wiring can be performed externally and then installed within the box.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Terminal Block Enclosure - Relay Box, WR Series, Resin, Oil-Resistant

  OHM Electric

  Includes internal spring type terminal block for relaying of power lines and motor wiring
  
  [Features]
  · Conforms to IP67 protective structure requirements (lid is waterproof and the wire insertion opening uses a mounting connector).
  · Number of terminal block leads: 6P

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	7 Days

• 

  Terminal Block Enclosure - Relay Box, WP Series, Nylon, Oil-Resistant

  OHM Electric

  Includes internal terminal block for relaying of power lines and motor wiring
  
  [Features]
  · Conforms to IP67 protective structure requirements (lid is waterproof and the wire insertion opening uses a mounting connector).
  · Number of terminal block leads: 6P

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	4 Days

• 

  Terminal Block Enclosure - Relay Box, W44 Series, Resin, Oil-Resistant

  OHM Electric

  For relaying of solenoids, sensors, and motor lines
  
  [Features]
  · Integrated cap-cone and terminal block for immediate use.
  · Round terminals can be connected without removing the terminal screws.
  · Rubber bushings included to support a wide variety of line widths

  Configure Now

  Ships as soon as	4 Days

• 

  Terminal Block Enclosure - Relay Box, WB Series, Nylon, Oil-Resistant

  OHM Electric

  Just install the DIN rail to set up a flexible or sensor wiring relay
  
  [Features]
  · Conforms to IP67 protective structure requirements (lid is waterproof and the wire insertion opening uses a mounting connector).
  · A DIN rail or block-type terminal block can be added

  Configure Now

  Ships as soon as	4 Days

• 

  Terminal Block Enclosure - Socket Threading, Waterproof

  Kasuga Electric Works

  Suited for small motors and sensor relays (female-threaded type)
  
  [Features]
  - User-friendly design with many rounded corner parts.
  The shape allows for natural-looking mounting to manufacturing machinery,
  food machinery, and commercial facilities.
  - Select the cable gland to match your application.
  - A 1:1 wiring connection makes the task of wiring easier.
  - Female-threaded type that supports flexible metal cables.

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

Loading...