DIN Rails & Dedicated Brackets

• 

  DIN Rails - Standard Model, Aluminum, 4.5 x 25 mm Holes, 7.3 mm Thickness

  MISUMI

  Standard aluminum DIN rail

  • Volume Discount is available

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  DIN Rail Mounting Bracket for Terminal Blocks - 25 Degree Angle, Single or Pack of 10【1-10 Pieces Per Package】

  MISUMI

  Support bracket with an inclination of 25 degrees with excellent workability

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  DIN rail

  WAGO

  Standard 35mm DIN rail mounting bracket that can easily be mounted to any position.
  
  [Features]
  ・Choose from anodized aluminum without any surface treatment, non-anodized aluminum, or steel with hexavalent free plating.
  ・20mm, 35mm, or 36mm mounting hole options.

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  DIN Rails - Standard Model, Aluminum, 4.5 x 25 mm Holes, 7.5 mm Thickness

  MISUMI

  Clean finish for cutting surfaces with no burrs.

  • Volume Discount is available

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Conductive Steel DIN Rail

  MISUMI

  A conductive model of DIN rail is also available.

  Configure Now

  Ships as soon as	4 Days

• 

  Aluminum DIN Rail with Mounting Holes - 5.5mm x 8mm Holes

  MISUMI

  Mounting surface enhanced aluminum DIN rail

  • Volume Discount is available

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Aluminum Conducting DIN Rail

  MISUMI

  Introducing an aluminum DIN rail that can prevent grounding.

  Configure Now

  Ships as soon as	4 Days

• 

  Aluminum DIN Rail - Standard Model

  MISUMI

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	4 Days

• 

  DIN Rails - Accessory, AC Base, Steel

  Kameda Denki

  Base used for mounting AC outlets onto DIN rails.
  
  [Features]
  · A base for mounting AC outlets onto 35-mm DIN rails.
  · Compatible outlets: WK3001 (single-open), WK3004 (dual-open).
  · Can be used for single/dual-port outlets.
  · *Outlets sold separately.
  · After mounting an outlet, the left-right position can be adjusted by rotating the set screws. (need to remove the cover for dual-open outlets)
  · A cable insertion hole is provided. Cutting a notch in the outlet is not required.

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  DIN Rail - Steel, Economy Model

  MISUMI

  • Full Length (mm): 1000
  • Material: Cold Rolled Sheets
  • Surface Treatment: Zinc Electroplating, Chromic Acid Passivation
  • Compatible Screw: M4

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	4 Days

• 

  DIN Rail Restraining Bracket, TKR Series【2 Pieces Per Package】

  Takachi Electronics Enclosure

  DIN Rail Restraining Bracket (TKR)
  
  [Features]
  · Bracket for anchoring components and terminal blocks used with DIN rails (35 mm).
  · TKR-TWE1 is a thin type.
  · To be used TKR-JTXE3 when mounting thicker objects.

  • Volume Discount is available

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  NF Base for DIN Rail【1-5 Pieces Per Package】

  MISUMI

  The attachment to DIN rail is done easily and securely with 1 screw

  • Separate charge

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Aluminum DIN Rail - Reinforced Model

  MISUMI

  • Full Length (mm): 1000
  • Material: Cold Rolled Sheets
  • Surface Treatment: Zinc Electroplating, Chromic Acid Passivation
  • Compatible Screw: M4

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	4 Days

• 

  FDR Series DIN Rail

  Takachi Electronics Enclosure

  DIN Rail (FDR)
  
  [Features]
  · Rail for mounting terminal blocks, relays, switches, etc. inside of boxes, or for mounting box main bodies.
  · Compatible with DIN rails from a variety of manufacturers.

  • Volume Discount is available

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  End Cap for DIN Rail【1-50 Pieces Per Package】

  Shinohara Electric

  [Features]
  It prevents injury due to burrs on the cut surface and improves safety.
  Since the processing of the cut surface is not required, work efficiency can be improved.

  Configure Now

  Ships as soon as	4 Days

• 

  Base rail (DIN Standard Rail)

  Kowa Kasei

  DIN standard aluminum rail. * Cutting tools are also available. [(1) KC-1S (For KBR-T and KBR-K) (2) KC-2S (For KBR-W and KBR-M) (3) KC-3S (For KBR-H)]

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  DIN Rail - SPCM Model

  MISUMI

  Allows for the installation of terminal blocks and electronic devices

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  DIN Rail Mounting Plate, DRA Series

  Takachi Electronics Enclosure

  DIN Rail Mounting Plate (DRA)
  
  [Features]
  · Mounting plate used to mount the case, circuit board, and parts on the DIN rail (35 mm).
  · Installation and removal can be performed easily by pulling on the lower lever.

  • Volume Discount is available

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Angle support for DIN rail mounting

  WAGO

  Mounting a DIN rail in an angle support allows it to be attached diagonally.

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  Mini Mounting Bracket for DIN Rail【10 Pieces Per Package】

  MISUMI

  Supports 3 levels of height adjustment in one size.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	7 Days

• 

  DIN35mm Rail (DAV)【1-50 Pieces Per Package】

  Toyogiken

  This is a 35-mm wide rail that supports the DIN standard. The DAV type is an aluminum rail capable of mounting 35-mm wide equipment.
  
  [Features]
  • Rails conforming to the PTU, PT-SS, PT, FP, FPW, CTW, PUW, VTF, VTH, VT-5KD, VTC, VT series are 35-mm width compatible with the DIN standard.
  • Equipment compatible with the various DIN rail types (35-mm width) can be mounted.

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  BAA 1000 Series, 35 mm Width DIN Rail【10 Pieces Per Package】

  IDEC

  BAA 1000 Type, 35 mm Width DIN Rail

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  DH Holder [Noise Filter Mount Supporting DIN Rail]【20 Pieces Per Package】

  Shinohara Electric

  [Applications]
  
  Please use it as an auxiliary mounting bracket to mount outlets on a DIN rail manufactured by Shinohara Electric. Please use as an auxiliary mounting bracket for the noise filter.

  Configure Now

  Ships as soon as	4 Days

• 

  DH Holder [Outlet Mounting Type]【20 Pieces Per Package】

  Shinohara Electric

  [Applications]
  
  Please use it as an auxiliary mounting bracket to mount outlets on a DIN rail manufactured by Shinohara Electric.

  Configure Now

  Ships as soon as	4 Days

• 

  Rail support bracket【20-50 Pieces Per Package】

  Toyogiken

  [Features]
  ・An adjustable tilt angle and lock mechanism are added to this mobile rail support tool.
  ・Tilt angle: when free (-40°, 0°, +40°) , when locked (-25°, 0°, +25°).

  Configure Now

  Ships as soon as	Same Day

  Stock Items Included

• 

  DIN Rail Dedicated Mounting Feet, CKD Series【2 Pieces Per Package】

  Takachi Electronics Enclosure

  DIN Rail Dedicated Mounting Feet
  
  [Features]
  · Mounting feet used to mount the case, board, and parts on the DIN rail.
  · Can be removed with one touch.

  • Volume Discount is available

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	4 Days

• 

  BADA 1000 Series, 35 mm Width DIN Rail

  IDEC

  BADA 1000 Type, 35 mm Width DIN rail

  Configure Now

  Ships as soon as	Quote

• 

  DH Holder (DIN Rail Extension Type)【50 Pieces Per Package】

  Shinohara Electric

  [Features]
  ·No need for drilling or processing for power strip when adding
  ·There are 2 types, a straight extension type and a type that can be extended 90 degrees toward you
  [Materials]
  ·Steel plate t = 1.6 mm
  ·Electrogalvanized trivalent chromate treatment finish (Environmentally friendly electrogalvanized trivalent chromate treatment finish product)

  Configure Now

  Ships as soon as	5 Days

• 

  DH Holder (Additional Tapped Hole Type)【50 Pieces Per Package】

  Shinohara Electric

  [Features]
  ·Tapped holes can be provided at any position on the DIN rail
  ·Can also be used as a terminal bracket for rails
  [Use]
  ·Please mount it to the DIN rail made by Shinohara Electric and use it as an attachment for various devices
  [Materials]
  ·Made of steel plate t = 1.6 mm
  ·Electrogalvanized trivalent chromate treatment finish (Environmentally friendly electrogalvanized trivalent chromate treatment finish product)

  Configure Now

  Ships as soon as	5 Days

• 

  DH Holder (Protective Cover Mounting Type)【100 Pieces Per Package】

  Shinohara Electric

  [Features]
  ·By tightening together with the terminal block fixing bracket, a protective cover can be easily attached around the energized part such as a DIN rail compatible relay
  [Materials]
  ·Steel plate t = 2.3 mm
  ·Electrogalvanized trivalent chromate treatment finish (Environmentally friendly electrogalvanized trivalent chromate treatment finish product)

  Configure Now

  Ships as soon as	5 Days

Loading...