MenuClose
Electrical Enclosure Installation Parts
| Days to Ship |
|
|---|
-
Supporter (Low Voltage Insulating Supporter to the Conductor)【25-50 Pieces Per Package】
Shinohara Electric
Conductor insulation supporter for use within low-voltage equipment. Helps save on time and labor traditionally associated with manually setting up insulators.
[Features]
· Parts for installation are available in two types; a type with nuts on both ends (S/T/D type) and a type with nuts and bolts (SB/TB/DB type).
Available in a variety of specifications with different heights and diameters for use in different applications.
Product offers excellent insulating properties (creeping flashover voltage of 2.5 kV for 1 minute). Lightweight and does not easily break.
Will not interfere with screws positioned adjacently, etc. due to small size
Made of polypropylene (black). *The bolts and nuts are finished with a trivalent chromate plating that takes into account environmental concerns.
[Applications]
As an insulating base for mounting equipment to distribution boards, control panels, rectifier panels, etc.
For use as insulation support for bus bar and electrical wiring. Can also be used as a base for branching wires by attaching a branching bracket.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Eye bolt【10-200 Pieces Per Package】
Shinohara Electric
Use the eye bolts for suspending various types of panels.
[Features]
· The eye bolts have been manufactured based on the JIS-B1168 standard.Configure Now
Ships as soon as 17 Days -
Mirai Industry
[Features]
· This type has eye bolts on both sides.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Mirai Industry
[Features]
· Used for mounting raceways, ducts, fluorescent lights, etc.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Free Plate Mounting Bracket (For Use Under False Floors)
Mirai Industry
[Features]
· Used for mounting free-mounting plates under false floors.Configure Now
Ships as soon as 4 Days -
Energy Meter / Instrument Box Mounting Plate
Mirai Industry
[Features]
· Can be mounted to pole bands.
For the BP-2U model, band through-holes (10‑mm wide) are provided for securing onto fixtures such as poles using stainless steel bands.Configure Now
Ships as soon as 4 Days -
4-mm Bar (Tilt Prevention Bar)
Mirai Industry
[Features]
· Convenient bar (4-mm steel wire) for preventing the tilting of plastic boxes (recessed square outlet boxes, recessed switch boxes) manufactured by Mirai Industry.
· Use the reinforcing sections in slabs or in walls to make box mounting easy and prevent titling. (Boxes can be fixed directly.)
· Uses freely bendable 4-mm steel wire so the height of the box can be freely adjusted to match the wall thickness.
· Models with a rotation stopper just need to be plugged into boxes. Easy to fix to boxes.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Mirai Industry
[Features]
· Used for mounting disaster prevention equipment, etc.
· Designed to support air pipes, making insulator sets unnecessary.
· Binding ties are unnecessary because the air pipes are sandwiched.Configure Now
Ships as soon as 4 Days -
Mirai Industry
[Features]
· Used for mounting stabilizers.
· Can also be used to mount hanging bolt.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
For H, L And C Structural Steel
Mirai Industry
[Features]
· Used for mounting disaster prevention equipment, etc.
· Designed to support air pipes, making insulator sets unnecessary.
· Binding ties are unnecessary because the air pipes are sandwiched.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Hanging Fixture For L Structural Steel
Mirai Industry
Mirai Industry installation parts, hanging fixture for L structural steel
Configure Now
Ships as soon as 4 Days -
Mirai Industry
[Features]
· Bracket used for mounting half-saddles, wall boxes, etc., onto Mirakku Hanger openings.
· Nuts are easily mounted from the opening surface.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Mirai Industry
[Features]
· Used for mounting Mirakku Hangers at a right angle onto walls or poles.Configure Now
Ships as soon as 4 Days -
Nut For Mirakku Hanger (For M4, M5, M6)
Mirai Industry
[Features]
· Bracket used for mounting half-saddles, wall boxes, etc., onto Mirakku Hanger openings.
· Nuts are easily mounted from the opening surface.Configure Now
Ships as soon as 4 Days -
Pole Band Bracket For Mirakku Hanger
Mirai Industry
[Features]
· A metal fixture used for securing Mirakku Hangers onto poles with stainless steel bands, etc.
(Bands up to 30 mm in width can be mounted to MNBKS.)
· Allowable static load: MNBS vertical direction 98 N (10 kgf): MNBKS vertical direction 196 N (20 kgf)
*Cannot be used with FRP products.Configure Now
Ships as soon as 4 Days -
Mirai Industry
[Features]
· Used for adjusting height when anchor bolts are too long.
· Spacers can be used while stacked.Configure Now
Ships as soon as 4 Days -
For Combining Square/Round Pipe, H Structural Steel And C Structural Steel
Mirai Industry
[Features]
· Used for lowering hanging bolts and supporting racks and ducts, etc.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Mirai Industry
[Features]
· Used for mounting stabilizers.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Shinohara Electric
[Features]
・ Since the earth wire is built in the plastic pipe, it has excellent insulation and is safe.
・ It is also lightweight and has excellent operability.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Stainless Steel Bushing【100 Pieces Per Package】
Shinohara Electric
Can be used as an induction bushing for door opening and closing shaft.
[Features]
- The taper of the bushing smoothly guides the shaft into the locking aperture when locking the door.
- Protects against noise caused by vibration.
- Peeling of the coating around the lock aperture caused by opening and closing of the lock shaft is eliminated, preventing rust formation.
- Mounting of the bushing can be performed in a single operation by simply pushing it in.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Switch Crossover Bar【100 Pieces Per Package】
Shinohara Electric
Can be used for switch crossover wiring
[Features]
· Streamlining of wiring through use on transition wiring for common lines of switches.
· The exposed part is insulation coated, and is therefore safe.
· The insertion conformation is forked (Y-shaped).
· Installation and removal are easy.
· Final wiring result is particularly clean for operation panels, etc. with a large number of different switch types.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Extensive EIA Rack Stowing Shelf, SRE Series
Takachi Electronics Enclosure
Extensive EIA rack storage shelf (SRE)
[Features]
· Storage shelf for a 19” EIA standard rack.
· Can also be installed in a 19” cabinet rack.
· Wide, for effective use of storage surface.
· Beige and black are available and can be selected in accordance with devices.
· For SRE44-315/420, the shelf board and side boards are integrated.
· On rare occasions, rack opening dimensions will differ by manufacturer, so confirm the dimensions before use.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
EIA Rack Sliding Table, NST Series
Takachi Electronics Enclosure
EIA Rack Sliding Table (NST Series)
[Features]
- Reinforcing fixture for secure fixing.
- Lock fixture to prevent falls when pulling out the table and to prevent table overhang.
- If the table is turned upside down, it can be used as a drawer.
- Attach the included protective sponge to the right and left side interiors before use.
· Rack opening dimensions may differ by manufacturer, so confirm the dimensions before use.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
BP34-M / Bar Holder / Integrated
NITTO KOGYO
BP34 series can be used when adding a step / gap to the bar height.
[Features]
- Can be used when adding a step / gap to the bar height.
- Can only be used up to 600V.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 12 Days -
Mirai Industry
[Features]
- Simple installation with single-sided mounting.
- Use to mount a box to a lightweight partition wall.
- No need to purchase accessories for different stud sizes or types; this is all you need to mount a box.
- Convenient for locations with narrow stud spacing (can be used even when cut down).
- Use the included double-sided tape for temporary fastening is possible; mounting to lightweight studs is also simple.
- The manufacturer's slide box includes holes for mounting, so it can be easily mounted to the center (vertical) position of an adjustable fixed bar (exclusions apply).
- The KGP-230 (total length 230 mm) can be mounted to any location, provided the studs are installed at an interval of 450 mm.
- The slide box (thickness 36mm) will fit right in if you align the box with the stud end before mounting.Configure Now
Ships as soon as 4 Days -
Settsu Metal Industrial
• Width (mm): 400
• Depth (mm): 3
• Color/Exterior Treatment: Aluminum base
• Primary Material: AluminumConfigure Now
Ships as soon as 4 Days -
Settsu Metal Industrial
• Color/Exterior Treatment: Black
• Primary Material: Polypropylene (feet) / steel (for tilt stand bar)Configure Now
Ships as soon as 4 Days -
Free-Mounting Plate, Vertical Type
Mirai Industry
[Features]
· A plastic mounting plate that enables equipment such as breakers, switches, watt-hour meter boxes and instrument boxes to be mounted in any position.
· Band through holes are provided for securing onto poles, etc., using stainless steel bands
· Two cabling knockouts convenient for routing VE pipes are provided respectively on the top, bottom, left, and right side surfaces.
(VE pipe [16] for BPF-3622, 4222, and 4922, and VE pipe [22] for BPF-5042, 6530, and BFO-5042)Configure Now
Ships as soon as 4 Days -
Free Mounting Plate (With Knockouts)
Mirai Industry
[Features]
· Two handy knockouts for routing VE tubes are provided on each of the top, bottom, left and right side surfaces respectively. · (VE tube [16] for BF-3622, 4222, and 4922, and VE tube [22] for BF-6530)
· With conduit knockouts, ideal for mounting instrument boxes.Configure Now
Ships as soon as 4 Days -
Mirai Industry
[Features]
· A plastic resin mounting plate with the feel of a wooden board. Equipment such as circuit breakers, switches, energy meter boxes and instrument boxes can be mounted in any position.
· Band through-holes are provided for securing onto fixtures such as poles using stainless steel bands.Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Integrated Watt-Hour Meter Mounting Plate
Mirai Industry
[Features]
· Can be mounted to pole bands.
For the B-2U model, band through-holes (10‑mm wide) are provided for securing onto fixtures such as poles using stainless steel bands.
· The B-2H is a 55‑mm thick type that can hold excess cable and features knockouts for feeding through VE tubes (22/28/36) and molded cable ducts (MD-40/70).Configure Now
Ships as soon as 4 Days -
Mirai Industry
For attaching heavy items such as chandeliers directly to concrete boxes.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Mirai Industry
[Features]
・ It is used to detect the center position of the box on a double ceiling.
・ You can use Mirai Industry-made magnet detector to detect the center of the box, so you can open a hole with the SB hole saw in a single operation.Configure Now
Ships as soon as 4 Days -
Mirai Industry
For center marking of the position where the box is embedded in the ceiling material, etc.
Configure Now
Ships as soon as 4 Days -
Mirai Industry
It is used when mounting heavy items such as chandeliers directly from the box.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Mirai Industry
[Features]
· Use to prevent the deformation of boxes when fixing them by pulling them taut with stud bolts.
· An economical type that can be used many times over.Configure Now
Ships as soon as 4 Days -
Polystat (3/8 Inch Stat) Patch Type
Mirai Industry
It is a patch type 3/8 Stat, so you can simply attach it from the back of the box.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Mirai Industry
[Features]
· Used for fixing boxes to formwork by pulling them tight.
· Models OF-1C/1D/1E/1F do not require a wrench. The plastic grip allows them to be fully tightened by hand.
· The tip of the OF-1D is slightly tapered to make it easier to screw into the stud hole. Also features a slot which can be used to loosen the bolt using a flathead screwdriver.
· The OF-1A/1B/1E/1F have a stopper to prevent embedding.
· The threaded tips of the OF-1F are flattened to allow removal using pliers after the concrete has been poured.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Mirai Industry
[Features]
· Used for clamping boxes to formwork.
· Simply mount the formwork to securely fix the box.
· There's no need to make holes in the formwork as it does not involve pulling via stud bolts.Configure Now
Ships as soon as 4 Days -
Superstud (3/8-Inch Stud With Clamp For Rebar)
Mirai Industry
[Features]
· Docking of clamps for cylindrical rods and rebars with 3/8-inch stud.
· Makes it easy to mount steel outlet boxes to walls and slab reinforcements, preventing the boxes from tilting.
· Use in conjunction with crank bars, deformed rebar and cylindrical rods (sold separately).- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Mirai Industry
· Used for mounting heavy items such as light fixtures to resin boxes.
Configure Now
Ships as soon as 4 Days -
Mirai Industry
This is used when mounting a box, etc., by using a fixed bar (sold separately) or square timber in the partition using light gauge steel studs.
Configure Now
Ships as soon as 4 Days -
Control Panel Support (Light Gauge Steel Stud Series)
Mirai Industry
[Features]
・ It is used when the reinforcing control panel is attached to the back of the board such as gypsum board wall.
・ Square timber can also be attached.
・ It can also be used to reinforce the mounting surface of ventilation fans, distribution boards, air conditioners, toilet paper holders, towel racks, etc.Configure Now
Ships as soon as 4 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Shinohara Electric | Shinohara Electric | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Shinohara Electric | Shinohara Electric | Shinohara Electric | Takachi Electronics Enclosure | Takachi Electronics Enclosure | NITTO KOGYO | Mirai Industry | Settsu Metal Industrial | Settsu Metal Industrial | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry | Mirai Industry |
| Product Series | Supporter (Low Voltage Insulating Supporter to the Conductor)【25-50 Pieces Per Package】 | For Combining Square/Round Pipe, H Structural Steel And C Structural Steel | |||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Days | 17 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days | 4 Days | 4 Days | 4 Days | 12 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Type | - | - | - | - | - | - | - | - | - | - | Device Mounting Bracket | - | - | - | - | - | - | Device Mounting Bracket | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Filters
-
Metric / Inch
-
Type
Brand
CAD
-
- 2D
- 3D
Related Categories to Electrical Enclosure Installation Parts
-
- Board Cable Clamps
- Board Racks, Stands & Mounting Poles
- Line Tape & Conductive Tape
- DIN Rails & Dedicated Brackets
- Document Holders
- Circuit Breaker Mounting Brackets
- Electrical Enclosure Exterior Parts
- Electrical Board Seals
- Electrical Board Handles
- Electrical Enclosure Installation Parts
- Electrical Board Louvers
- Electrical Enclosure Maintenance Parts
- Electrical Enclosure Mounting Brackets
- Electrical Board Window Frames
- Ground Bars & Copper Bus Bars
- Heaters & Heat Sinks for Electrical Enclosures
- Insulated Supports
- Electrical Enclosure Interior Parts
-
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy