Heaters & Heat Sinks for Electrical Enclosures

• 

  Heat Sink LSI V, Forced-Air / Hollow, Aluminum Extrusion Type (With Clear Anodized Aluminum)

  LSICOOLER

  In semiconductor devices used in current electrical and electronic equipment (transistors, CPU, IGBT, etc.),
  if cooling cannot be performed during operation, components may be destroyed by the heat they generate.
  A heat sink is a radiator for electronic components that prevents damage by immediately transferring this heat away from the component and cooling it.
  LSI COOLER continues to pursue high level performance through technology underpinned by thermal theory in order to produce highly efficient heat sinks.
  This V Series are a series of aluminum extrusion type heat sinks classified as hollow types (medium power, for forced air cooling).

  • Volume Discount is available

  Configure Now

  Ships as soon as	4 Days

• 

  Heat Sink LSI F, Multi/General Purpose, Aluminum Extrusion Type (With White Clear Anodizing)

  LSICOOLER

  In semiconductor devices used in current electrical and electronic equipment (transistors, CPU, IGBT, etc.),
  if cooling cannot be performed during operation, components may be destroyed by the heat they generate.
  A heat sink is a radiator for electronic components that prevents damage by immediately transferring this heat away from the component and cooling it.
  LSI COOLER continues to pursue high level performance through technology underpinned by thermal theory in order to produce highly efficient heat sinks.
  This F Series are a series of aluminum extrusion fin type heat sinks classified as multi purpose and general purpose types.

  • Volume Discount is available

  Configure Now

  Ships as soon as	4 Days

• 

  Heatsink for Surface Mounting Device SQ Series Aluminum Extrusion/Slit Fin Type

  LSICOOLER

  • Application: For surface mounted device
  • Heat sink Type: Aluminum Extrusion
  • Surface Treatment: Without Treatment
  • Pin for circuit board mounting: NA
  • Tap: NA

  • Volume Discount is available

  Configure Now

  Ships as soon as	4 Days

• 

  Heat Sink LSI M, Multi/General Purpose, Aluminum Extrusion Type (With Clear Anodized Aluminum)

  LSICOOLER

  In semiconductor devices used in current electrical and electronic equipment (transistors, CPU, IGBT, etc.),
  if cooling cannot be performed during operation, components may be destroyed by the heat they generate.
  A heat sink is a radiator for electronic components that prevents damage by immediately transferring this heat away from the component and cooling it.
  LSI COOLER continues to pursue high level performance through technology underpinned by thermal theory in order to produce highly efficient heat sinks.
  This M Series are a series of aluminum extrusion fin type heat sinks classified as multi purpose and general purpose types.

  • Volume Discount is available

  Configure Now

  Ships as soon as	4 Days

• 

  P Series Aluminum Extrusion Heat Sink for Pin Mounting Device

  LSICOOLER

  • Application: For pin mounted devices
  • Heat sink Type: Aluminum Extrusion
  • L Dimension (mm): 25
  • Note: Surface treatment: cut surface only, non-anodized

  Configure Now

  Ships as soon as	4 Days

• 

  Heater, Terminal Block Type

  Shinohara Electric

  Can be used as a heater to prevent dew and moisture inside the panel. Workability is good due to terminal block.
  
  [Features]
  · Easy to work with due to inclusion of terminal block in the wire connecting element.
  · Terminal block is made of polycarbonate rated to 600V / 25A.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	4 Days

• 

  Space Heaters

  Shinohara Electric

  For preventing dew and moisture from collecting on the inside of panels. - Covers not included.
  
  [Features]
  - Heater element is made from a chrome-plated steel wire wrapped around a mica sheet, then sealed airtight by a galvanized steel or stainless steel plate. It does not come into contact with the air, preventing oxidation or corrosion.
  - Once installed, only periodic inspection is required.
  - Heater element is fixed and completely insulated, ensuring it is safe and can handle heavy vibration.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	4 Days

• 

  Accessory For Heating Enclosure - Thermostat

  Rittal

  Ideal for heating control. This thermostat can also be used as an alarm sensor to monitor the temperature inside the enclosure.
  
  [Features]
  · Uses a quick connection method whereby the terminal connection can be screwed in from the outside
  · Can be flexibly mounted on a vertical or horizontal 35‑mm rail compliant with EN 50 022,
  or the supplied adapter can be used for snap-type fastening onto the TS enclosure frame or a mounting plate.
  
  [Paint color]
  · RAL 7035
  [Bundled items]
  · Bottom mounting adapter, mounting plate

  Configure Now

  Ships as soon as	4 Days

• 

  Space Heater with Cover

  Shinohara Electric

  Can be used as a heater to prevent dew and moisture inside the panel.
  
  [Features]
  · Incorporates a space heater into a heat dissipation cover made of stamped steel plating and can be easily mounted using either two or four mounting screws.
  · The design and build are extremely safe, eliminating the risk of direct contact with the heat source.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	4 Days

• 

  Thermostat

  Shinohara Electric

  For use with temperature controls (power supply switching) pertaining to space heaters, ventilation fans, etc.
  
  [Features]
  · Can be mounted to DIN rail (mounted via the center of the thermoStud body).

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	4 Days

• 

  Sheath heater specifications: SSH type

  Shinohara Electric

  Can be used as a heater to prevent dew and moisture accumulation inside the panel. Sheath heater type.
  
  [Features]
  · By using a sheath heater of only 200 W, the overall length isshortened, saving on space.
  · Incorporates a space heater into a heat dissipation cover made of stamped steel plating and can be easily mounted using four mounting screws.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	5 Days

• 

  Accessory For Heating Enclosure - Humidity Sensor

  Rittal

  Prevents condensation on parts and electronics.
  
  [Features]
  · Uses a quick connection method whereby the terminal connection can be screwed in from the outside
  · Can be flexibly mounted on a vertical or horizontal 35‑mm rail compliant with EN 50 022,
  or the supplied adapter can be used for snap-type fastening onto the TS enclosure frame or a mounting plate.
  
  [Product specifications]
  · Switch contact: ON/OFF switch contact by spring switch
  · Allowable contact capacity: AC approx. 5 (0.2) A (inductive load when cos φ = 0.6) / DC = max. 20 W
  · Setting range: relative humidity 50 to 100%
  · Switching differential approx. 4%
  [Paint color]
  · RAL 7035 (light gray [approximate Munsell value 2.5PB8.5/1)])

  Configure Now

  Ships as soon as	5 Days

• 

  Heat Sink LSI S, For Stud-Type Devices, Aluminum Extrusion Type

  LSICOOLER

  In semiconductor devices used in current electrical and electronic equipment (transistors, CPU, IGBT, etc.),
  if cooling cannot be performed during operation, components may be destroyed by the heat they generate.
  A heat sink is a radiator for electronic components that prevents damage by immediately transferring this heat away from the component and cooling it.
  LSI COOLER continues to pursue high level performance through technology underpinned by thermal theory in order to produce highly efficient heat sinks.
  The S Series are a series of heat sinks which mount to stud type devices and are classified as multi purpose and general purpose types.

  • Volume Discount is available

  Configure Now

  Ships as soon as	4 Days

• 

  General-Purpose Heat Dissipation Diffuser Plate / Heat Shield For Space Heaters

  Shinohara Electric

  [Features]
  ·Heat sink: By guiding the air updraft (heat convection) to a large space inside the panel without obstructing (retaining) it, the temperature rise of various parts installed above the heater is suppressed
  ·Heat shield plate: It blocks the radiant heat from the heater and suppresses the temperature rise of various parts on the side of the heater
  [Materials]
  ·SUS304 t = 1 mm

  Configure Now

  Ships as soon as	5 Days

• 

  200W compact heater

  Shinohara Electric

  You can use it as a heater to prevent condensation and moisture inside the panel. The design is more compact than conventional 200W heaters.
  
  [Features]
  ・The 200W standard type has a small heater area and was designed to save space.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	6 Days

• 

  Heat Sink for Pin Mounting Device, U Series, Plate Type

  LSICOOLER

  • Application: For pin mounted devices
  • Heat sink Type: Plate
  • Surface Treatment: Black Anodize Treatment
  • Pin for circuit board mounting: NA
  • Tap: NA

  • Volume Discount is available

  Configure Now

  Ships as soon as	4 Days

• 

  Enclosure Heater - Continuous Heat Output 10-150 W, No Fan

  Rittal

  This is a fanless PTC heater. Continuous heating power: A wide range of products are available from 10 W up to 150 W.
  
  [Bundled items]
  · PTC heater, quick clamp connector, anchoring parts

  Configure Now

  Ships as soon as	4 Days

• 

  Space Heater Minimum Type Heat Sink / Heat Shield For 2-Point Stop

  Shinohara Electric

  [Features]
  ·Heat sink: A punching hole on the top allows some heat to escape. Reduces the risk of workers' hands, falling objects, etc., coming into contact with high-temperature heat sources
  ·Heat shield plate: There is no punching hole on the upper surface, and by blocking heat convection, the heat effect above the heater is suppressed
  [Materials]
  ·Steel plate t = 1.2 mm Electrogalvanized zinc plating trivalent chromate treatment finish (Environmentally friendly electrogalvanized zinc trivalent chromate treated product)

  Configure Now

  Ships as soon as	5 Days

Loading...