Days to Ship |
|
---|
TSC Series Carbide Radius End Mill, 4-Flute/Regular Model
MISUMI
Classic radius with regular blade length
Configure Now
Ships as soon as | 4 Days |
---|
UNION TOOL
• Model: Long Neck Radius
• Number Of Flutes (sheet): 4
• Helix Angle (Θ): Standard Helix (30 to 40°)
• Coating: For High Hardness (Silicone-Based)
• Maximum: Carbide End Mill Unimax Series, Vo.12, 2010 –
Configure Now
Ships as soon as | 4 Days |
---|
MHR230R MUGEN-COATING 2-Flute Long Neck Radius End Mill
NS TOOL
• Model: Long Neck Radius
• Number Of Flutes (sheet): 2
• Helix Angle (Θ): Standard Helix (30 to 40°)
• Coating: TiAlN
• (γ) Neck Angle (°): 12°
Configure Now
Ships as soon as | 4 Days |
---|
XAL Series Carbide Radius End Mill, 4-Flute, 45° Torsion/Regular Model
MISUMI
4-Blade Radius for High-Efficiency and High-Speed Machining [C-Value]
Configure Now
Ships as soon as | 4 Days |
---|
Cermet End Mill (for Bottom Finishing) FX-MCF
OSG
Cermet base material + FX coating end mill for bottom finish. Provides a mirror finish at astoundingly high speeds.
Configure Now
Ships as soon as | 4 Days |
---|
VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill
MISUMI
[Features]
·Effective for deep cutting due to long neck type
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Cutting edge radius also reinforced cutting edge rigid
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Configure Now
Ships as soon as | 4 Days |
---|
Nachi-Fujikoshi
End mill for aluminum and copper alloys. Capable of rounding corners of grooves.
Configure Now
Ships as soon as | 4 Days |
---|
2-Flute, Corner R Short Type FX-CR-EDS-6
OSG
End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.
Configure Now
Ships as soon as | 4 Days |
---|
HRRS, HM Coated 4-Flute Short Shank Radius
UNION TOOL
• Model: Long Neck Radius
• Number Of Flutes (sheet): 4
• Helix Angle (Θ): Powerful Helix (45° to 60°)
• Coating: HARD MAX
• Shank Taper Angle Bta (°): 16°
Configure Now
Ships as soon as | 4 Days |
---|
HRRS, HM Coated 4-Flute Radius
UNION TOOL
• Model: Long Neck Radius
• Number Of Flutes (sheet): 4
• Helix Angle (Θ): Powerful Helix (45° to 60°)
• Coating: For High Hardness (Silicone-Based)
• Shank Taper Angle Bta (°): 16°
Configure Now
Ships as soon as | 4 Days |
---|
MSRS230 MUGEN-COATING 2-Flute Radius End Mill
NS TOOL
• Model: Regular Type
• Number Of Flutes (sheet): 2
• Helix Angle (Θ): Standard Helix (30 to 40°)
• Coating: TiAlN
• (γ) Neck Angle (°): 9°
Configure Now
Ships as soon as | 4 Days |
---|
MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels
NS TOOL
Superior surface finish with excellent chipping prevention and reduced chattering due to the use of MUGEN coating for hardened steels and a new shape
Configure Now
Ships as soon as | 4 Days |
---|
XAL Series Carbide Radius End Mill, 4-Flute/Short Model
MISUMI
The 4-blade type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes [C-Value]
Configure Now
Ships as soon as | 4 Days |
---|
TSC Series Carbide Radius End Mill, 3-Flute, 45° Spiral/Regular Model
MISUMI
Resistant to chattering, it has improved durability and excellent cutting performance
Configure Now
Ships as soon as | 4 Days |
---|
TSC Series Carbide Radius End Mill, 4-Flute, 45° Regular Model
MISUMI
A multi-functional 4-blade radius-equipped type that compatible with high-efficiency and high-speed processing
Configure Now
Ships as soon as | 4 Days |
---|
TSC Series Carbide Radius End Mill, 2-Flute/1.5D Flute Length (Stub) Model
MISUMI
Stub blade length with excellent edge rigidity
Configure Now
Ships as soon as | 4 Days |
---|
TSC Series Carbide Tapered Neck Radius End Mill, 2-Flute/Tapered Neck Model
MISUMI
High-Precision Tapered Neck Radius
Configure Now
Ships as soon as | 4 Days |
---|
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 4-flute radius end mill that achieves high feed/high speed machining
Configure Now
Ships as soon as | 4 Days |
---|
MHDH445R 4-Flute Radius-End Mill for High-Hardness
NS TOOL
• Model: Regular Type
• Number Of Flutes (sheet): 4
• Helix Angle (Θ): Powerful Helix (45° to 60°)
• Coating: For High Hardness (Silicone-Based)
• R Precision (µm): 0.01~-0.01
Configure Now
Ships as soon as | 4 Days |
---|
MHR430R MUGEN-COATING 4-Flute Long Neck Radius End Mill
NS TOOL
• Model: Long Neck Radius
• Number Of Flutes (sheet): 4
• Helix Angle (Θ): Standard Helix (30 to 40°)
• Coating: TiAlN
• (γ) Neck Angle (°): 12°
Configure Now
Ships as soon as | 4 Days |
---|
MHDH645R 6-Flute Radius-End Mill for High-Hardness
NS TOOL
• Model: Regular Type
• Number Of Flutes (sheet): 6
• Helix Angle (Θ): Powerful Helix (45° to 60°)
• Coating: For High Hardness (Silicone-Based)
• R Precision (µm): 0.01~-0.01
Configure Now
Ships as soon as | 4 Days |
---|
ATOM
Simultaneously machines rounded corners and straight base surfaces. High precision radius shape smoothly connects the straight part with the rounded part.
Configure Now
Ships as soon as | 4 Days |
---|
One-Cut Radius End Mill for Heat Resistant Alloy DV-OCSAR Type
DIJET
[Features]
· Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Configure Now
Ships as soon as | 4 Days |
---|
XAL Series Carbide Radius End Mill, 2-Flute/Short Model
MISUMI
Radius end mills are available at low prices [C-Value]
Configure Now
Ships as soon as | 4 Days |
---|
TSC Series Carbide Radius End Mill (for Shrinkage Fitting), 3-Flute, 45° Spiral/Stub Model
MISUMI
Further suppresses chattering using the shrink-fit holder
Configure Now
Ships as soon as | 4 Days |
---|
Carbide Radius End Mill for Aluminum Machining, 2-Flute/Regular Model
MISUMI
Non-coated manufactured products can be shipped on the 5th day in addition to the stocked products
Configure Now
Ships as soon as | 4 Days |
---|
Carbide Radius End Mill for Resin Machining, 2-Flute/Regular Model
MISUMI
Small radius type that prevents cutter marks on resin
Configure Now
Ships as soon as | 4 Days |
---|
Non-Coated TS Coated Carbide 0.1mm Unit Radius Designated End Mill
MISUMI
3 day delivery of add-on machining radius in 0.1 mm increments
Configure Now
Ships as soon as | 5 Days |
---|
XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion/Short Model
MISUMI
Introducing a short model in the 4-flute radius for high-efficiency and high-speed machining (C-Value)
Configure Now
Ships as soon as | 4 Days |
---|
VAC Series Carbide 2-Flute Long Neck Radius End Mill
MISUMI
[Features]
·Effective for deep cutting due to long neck type
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Cutting edge radius also reinforced cutting edge rigid
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Configure Now
Ships as soon as | 4 Days |
---|
GSX MILL VL Ti/SUS Radius 2.5D GSXVL4T-R-2.5D
Nachi-Fujikoshi
The variable split, variable lead, and sharp cutting edge suppress chatter and make it suitable for heat-resistant alloys.
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
Carbide End Mill, Phoenix (High Feed Bull Nose) PHX-CRT
OSG
Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.
Configure Now
Ships as soon as | 4 Days |
---|
Heavy Duty Multi-Function FXS-PKE
OSG
In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.
Configure Now
Ships as soon as | 4 Days |
---|
Carbide Ultra FX Super End Mill (Corner Radius Short Type) FXS-CR-EMS
OSG
Radius end mill for high-speed processing with high rigidity. High speed machining of hardened steel is also possible.
Configure Now
Ships as soon as | 4 Days |
---|
HLRS2000 HM Coated 2 Flute Long-Neck Radius
UNION TOOL
• Model: Long Neck Radius
• Number Of Flutes (sheet): 2
• Helix Angle (Θ): Standard Helix (30 to 40°)
• Coating: For High Hardness (Silicone-Based)
• Blade Diameter Tolerance (mm): 0~-0.015
Configure Now
Ships as soon as | 4 Days |
---|
C-CRS UT Coated 2-Flute Radius
UNION TOOL
• Model: Regular Type
• Number Of Flutes (sheet): 2
• Coating: TiCN
Configure Now
Ships as soon as | 4 Days |
---|
HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius
UNION TOOL
• Model: Long Neck Radius
• Number Of Flutes (sheet): 2
• Helix Angle (Θ): Standard Helix (30 to 40°)
• Coating: For High Hardness (Silicone-Based)
• Blade Diameter Tolerance (mm): 0~-0.01
Configure Now
Ships as soon as | 4 Days |
---|
MSTNR230 MUGEN-COATING Long Tapered Neck Radius End Mill
NS TOOL
• Model: Tapered Neck Radius
• Number Of Flutes (sheet): 2
• Helix Angle (Θ): Standard Helix (30 to 40°)
• Coating: TiAlN
• R Precision (µm): 0.005~-0.005
Configure Now
Ships as soon as | 4 Days |
---|
Power Radius End Mill MSXH440R
NS TOOL
• Model: Regular Type
• Number Of Flutes (sheet): 4
• Helix Angle (Θ): Standard Helix (30 to 40°)
• Coating: For High Hardness (Silicone-Based)
Configure Now
Ships as soon as | 4 Days |
---|
Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES2-R Type
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Configure Now
Ships as soon as | 4 Days |
---|
CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut
SANDVIK
Unique shape exhibits high performance
Configure Now
Ships as soon as | 4 Days |
---|
MISUMI
Achieves high efficiency machining using the high feed. The 3-blade structure suppresses the occurrence of chattering
Configure Now
Ships as soon as | 4 Days |
---|
MISUMI
The 4-blade composite radius achieves the high efficiency machining by high feed
Configure Now
Ships as soon as | 4 Days |
---|
MISUMI
Avoids the interference of tools in deep engraving and achieves the high efficiency machining by high feed
Configure Now
Ships as soon as | 4 Days |
---|
Brand |
---|
Product Series |
Days to Ship |
Specifications |
Flute Diameter (D)(φ) |
R Size(mm) |
Work Material |
Flute Length (l)(mm) |
Number of Flutes |
Model |
Overall Length (L)(mm) |
Link Diameter (d)(mm) |
Length Under Neck (l1)(mm) |
Processing Application |
Coating |
Helix Angle |
R Precision(µm) |
|
|
| |||||||||||||||||||||||||||||||||||||||||||
Brand | MISUMI | UNION TOOL | NS TOOL | MISUMI | OSG | MISUMI | Nachi-Fujikoshi | OSG | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NS TOOL | NS TOOL | NS TOOL | ATOM | DIJET | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | DIJET | SANDVIK | MISUMI | MISUMI | MISUMI |
Product Series | XAL Series Carbide Radius End Mill, 4-Flute, 45° Torsion/Regular Model | VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill | MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels | TSC Series Carbide Radius End Mill, 3-Flute, 45° Spiral/Regular Model | TSC Series Carbide Radius End Mill, 4-Flute, 45° Regular Model | TSC Series Carbide Radius End Mill, 2-Flute/1.5D Flute Length (Stub) Model | TSC Series Carbide Tapered Neck Radius End Mill, 2-Flute/Tapered Neck Model | One-Cut Radius End Mill for Heat Resistant Alloy DV-OCSAR Type | TSC Series Carbide Radius End Mill (for Shrinkage Fitting), 3-Flute, 45° Spiral/Stub Model | Carbide Radius End Mill for Aluminum Machining, 2-Flute/Regular Model | Carbide Radius End Mill for Resin Machining, 2-Flute/Regular Model | Non-Coated TS Coated Carbide 0.1mm Unit Radius Designated End Mill | XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion/Short Model | Carbide Ultra FX Super End Mill (Corner Radius Short Type) FXS-CR-EMS | HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius | Solid End Mill for Aluminum Machining (Regular Blade) (with Corner Radius) AL-SEES2-R Type | |||||||||||||||||||||||||||||
Days to Ship | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||
Flute Diameter (D)(φ) | 1 ~ 12 | 0.8 ~ 6 | 0.2 ~ 6 | 4 ~ 12 | 6 ~ 20 | 1 ~ 12 | 2 ~ 20 | 0.5 ~ 2.5 | 2 ~ 12 | 2 ~ 12 | 1 ~ 5 | 1 ~ 6 | 3 ~ 20 | 3 ~ 20 | 3 ~ 20 | 1 ~ 12 | 0.2 ~ 3 | 3 ~ 10 | 3 ~ 4 | 1 ~ 6 | 5 ~ 12 | 1 ~ 6 | 3 ~ 20 | 1 ~ 12 | 3 ~ 12 | 2 ~ 12 | 1 ~ 10 | 1 ~ 20 | 1 ~ 20 | 0.4 ~ 12 | 6 ~ 20 | 3 ~ 6 | 1 ~ 5 | 3 ~ 20 | 6 ~ 25 | 0.4 ~ 6 | 3 ~ 6 | 0.2 ~ 6 | 0.2 ~ 3 | 3 ~ 12 | 6 ~ 20 | 2 ~ 16 | 4 ~ 12 | 4 ~ 20 | 4 ~ 12 |
R Size(mm) | 0.1 ~ 3 | 0.05 ~ 1 | 0.05 ~ 1 | 0.2 ~ 2 | 0.1 ~ 0.4 | 0.2 ~ 1 | 0.2 ~ 3 | 0.1 | 0.3 ~ 4 | 0.3 ~ 4 | 0.1 ~ 1.5 | 0.05 ~ 1 | 0.1 ~ 3 | 0.2 ~ 2 | 0.2 ~ 3 | 0.1 ~ 3 | 0.05 ~ 0.5 | 0.2 ~ 1.5 | 0.2 ~ 0.5 | 0.05 ~ 1 | 0.2 ~ 2 | 0.1 ~ 2 | 0.5 ~ 3 | 0.1 ~ 3 | 0.3 ~ 1 | 0.2 ~ 1 | 0.2 | 0.1 ~ 3 | 0.2 ~ 3 | 0.1 ~ 1 | 0.3 ~ 3 | 0.2 ~ 2 | 0.3 ~ 1 | 0.2 ~ 3 | 0.2 ~ 3 | 0.05 ~ 1 | 0.3 ~ 2 | 0.05 ~ 1 | 0.05 ~ 0.5 | 0.3 ~ 3 | 0.4 ~ 5 | 0.2 ~ 3 | 0.813 ~ 2.438 | 0.813 ~ 2.607 | 0.813 ~ 2.438 |
Work Material | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Cast Iron[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Cast Iron[○] | Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[○/◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Stainless Steel[◎] / Titanium[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC60[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] |
Flute Length (l)(mm) | 3 ~ 36 | 0.48 ~ 4.8 | 0.15 ~ 9 | 18 ~ 38 | 0.9 ~ 3.2 | 1.5 ~ 30 | 6 ~ 38 | 0.7 ~ 3.7 | 2 ~ 12 | 2 ~ 12 | 2 ~ 10 | 0.8 ~ 5 | 8 ~ 38 | 5 ~ 56 | 5 ~ 56 | 1.5 ~ 18 | 0.16 ~ 6 | 7.5 ~ 30 | 6 ~ 8 | 0.8 ~ 5 | 10 ~ 24 | 3 ~ 15 | 8 ~ 38 | 3 ~ 30 | 4.5 ~ 18 | 5 ~ 36 | 3 ~ 30 | 4 ~ 60 | 3 ~ 45 | 0.6 ~ 18 | 15 ~ 50 | 3 ~ 6 | 2 ~ 10 | 5 ~ 30 | 15 ~ 50 | 0.4 ~ 6 | 10 ~ 15 | 0.2 ~ 6 | 0.15 ~ 2.5 | 8 ~ 26 | 17 ~ 45 | 2 ~ 16 | 8 ~ 24 | 8 ~ 40 | 8 ~ 24 |
Number of Flutes | 4 | 4 | 2 | 4 | 4 | 4 | 2 | 2 | 4 | 4 | 2 | 4 | 4 | 3 | 4 | 2 | 2 | 4 | 4 | 4 | 6 | 2 | 4 | 2 | 3 | 2 | 2 | 2 ~ 4 | 4 | - | 4 | 2 | 3 | 4 | 6 ~ 8 | 2 | 2 | 2 | 2 | 4 | 2 | 2 ~ 4 | 3 | 4 | 3 |
Model | Regular Type | Long Neck Radius | Long Neck Radius | Regular Type | Regular Type | Long Neck Radius | Regular Type | Regular Type | Long Neck Radius | Long Neck Radius | Regular Type | Long Neck Radius | Regular Type | Regular Type | Regular Type | Regular Type | Tapered Neck Radius | Regular Type | Regular Type | Long Neck Radius | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Long Neck Radius | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Long Neck Radius | Regular Type | Long Neck Radius | Tapered Neck Radius | Regular Type | Regular Type | Regular Type / Long Neck Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius |
Overall Length (L)(mm) | 45 ~ 85 | 50 ~ 120 | 45 ~ 110 | 60 ~ 100 | 90 ~ 160 | 50 ~ 110 | 40 ~ 100 | 50 | 45 ~ 75 | 70 ~ 120 | 60 ~ 70 | 50 ~ 110 | 50 ~ 100 | 60 ~ 130 | 60 ~ 130 | 40 ~ 75 | 40 ~ 100 | 45 ~ 80 | 60 | 50 ~ 110 | 60 ~ 80 | 45 ~ 60 | 60 ~ 125 | 50 ~ 75 | 40 ~ 65 | 40 ~ 80 | 50 ~ 80 | 40 ~ 125 | 50 ~ 110 | 40 ~ 100 | 50 ~ 100 | 45 ~ 50 | 60 ~ 70 | 60 ~ 160 | 90 ~ 180 | 50 ~ 120 | 45 ~ 50 | 50 ~ 100 | 50 ~ 110 | 60 ~ 80 | 55 ~ 115 | 57 ~ 150 | 50 ~ 100 | 50 ~ 150 | 80 ~ 160 |
Link Diameter (d)(mm) | 4 ~ 12 | 4 ~ 6 | 4 ~ 6 | 6 ~ 12 | 6 ~ 20 | 4 ~ 12 | 4 ~ 20 | 6 | 3 ~ 12 | 3 ~ 12 | 4 ~ 6 | 4 ~ 6 | 4 ~ 20 | 6 ~ 20 | 6 ~ 20 | 4 ~ 12 | 4 ~ 6 | 3 ~ 10 | 6 | 4 ~ 6 | 6 ~ 12 | 4 ~ 6 | 6 ~ 20 | 4 ~ 12 | 6 ~ 12 | 4 ~ 12 | 3 ~ 10 | 4 ~ 20 | 4 ~ 20 | 4 ~ 12 | 6 ~ 20 | 6 | 6 | 6 ~ 20 | 6 ~ 25 | 4 ~ 6 | 6 | 4 ~ 6 | 4 ~ 6 | 6 ~ 12 | 6 ~ 20 | 6 ~ 16 | 6 ~ 12 | 6 ~ 20 | 6 ~ 12 |
Length Under Neck (l1)(mm) | 23 ~ 55 | 2 ~ 48 | 0.5 ~ 48 | - | 9 ~ 30 | 4 ~ 50 | - | 1.5 ~ 5 | 6 ~ 36 | 6 ~ 36 | - | 3 ~ 48 | - | 26 ~ 92 | 26 ~ 92 | 14 ~ 45 | 1 ~ 60 | - | - | 3 ~ 48 | - | - | 10 ~ 15 | - | - | 23 ~ 50 | - | - | - | 2 ~ 50 | - | - | 4 ~ 15 | 9 ~ 60 | - | 1 ~ 60 | - | 0.5 ~ 30 | 1 ~ 60 | - | - | 4 ~ 42 | - | - | 35 ~ 108 |
Processing Application | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface | Side Surface / Groove | Groove | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting |
Coating | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | TiAlN | For General Steel (AlCrN etc.) | TiAlN | - | DLC | TiAlN | - | For High Hardness (Silicone-Based) | TiAlN | For High Hardness (Silicone-Based) | For General Steel (AlCrN etc.) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | TiAlN | For High Hardness (Silicone-Based) | Non-Coated | - | For General Steel (AlCrN etc.) | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) / Non-Coated | For General Steel (AlCrN etc.) | - | For General Steel (AlCrN etc.) | Non-Coated | TiAlN | TiAlN | TiAlN | For High Hardness (Silicone-Based) | TiCN | For High Hardness (Silicone-Based) | TiAlN | For High Hardness (Silicone-Based) | Non-Coated | AlTiN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) |
Helix Angle | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | No Helix/ None | - | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | - | Powerful Helix (45° to 60°) | No Helix/ None | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | - | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) |
R Precision(µm) | ±0.01 ~ ±0.02 | - | 0.005~-0.005 ~ 0.01~-0.01 | ±0.02 | - | - | -0.032~-0.059 ~ -0.014~-0.028 | - | - | - | 0.005~-0.005 ~ 0.01~-0.01 | 0.005~-0.005 ~ 0.01~-0.01 | ±0.02 | ±0.01 | ±0.01 | ±0.01 ~ ±0.02 | ±0.005 ~ ±0.01 | ±10 | 0.01~-0.01 | 0.005~-0.005 ~ 0.01~-0.01 | 0.01~-0.01 | ±0.02 ~ ±0.05 | 0.02~-0.02 | ±0.02 | ±0.01 | ±0.01 ~ ±0.02 | ±0.02 | ±0.02 | ±0.02 | - | 0~-0.030 | - | - | - | - | - | - | - | 0.005~-0.005 | - | 0.025~-0.025 | - | - | - | - |
Loading...
[5-56/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy