MenuClose
Carbide Taper End Mills
Select a subcategory
| Days to Ship |
|
|---|
-
Carbide Reverse Cutter (Carbide Solid Reverse Taper End Mill)
EIKOSHA
Reverse tapering, uniform torsion (high-efficiency and high-accuracy)
Configure Now
Ships as soon as 4 Days -
TSC Series Carbide Tapered End Mill, 2-Flute/Regular Model
MISUMI
Powerful support with the rich variations to choose from and price reduction
- Price Reduction
- TS
- General Steel
- 2 Flutes
- R (Regular)
Configure Now
Ships as soon as 4 Days -
2-Flute, Tapered Blade, Short Type FX-MG-TPDS
OSG
FX coating enables high efficiency and long service life. Can be used with a wide range of materials, from general materials to hardened steel.
Configure Now
Ships as soon as 4 Days -
ATOM
A small diameter taper end mill that standardizes maximum taper angles up to 15 degrees.
Configure Now
Ships as soon as 4 Days -
One Cut Ball Long Type DZ-OCLB-T
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Configure Now
Ships as soon as 4 Days -
MUGEN-COATING Extra Long Tapered Neck Ball End Mill MRBTN230L
NS TOOL
• Model: Tapered Bore
• Coating: TiAlN
• Number Of Flutes (sheet): 2
• Torsional Angle (°): Standard torsion (30-40°)
• (γ) Neck Angle (°): 12°Configure Now
Ships as soon as 4 Days -
TSC Series Carbide End Mill for Runner Grooves, for Trapezoid Runner Grooves/2-Flute
MISUMI
Must-haves for the runner grooving of plastic mold
- Price Reduction
- TS
- General Steel
- 2 Flutes
Configure Now
Ships as soon as 4 Days -
TSC Series Carbide Tapered End Mill, 4-Flute/Regular
MISUMI
The 4-blade type with high rigidity is made more affordable
- Price Reduction
- TS
- General Steel
- 4 Flutes
- R (Regular)
Configure Now
Ships as soon as 4 Days -
Carbide Tapered End Mill NTE-2
NS TOOL
• Model: Tapered Square
• Coating: Non-Coated
• Number Of Flutes (sheet): 2
• Torsional Angle (°): 30Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
ATOM
A small diameter taper ball end mill that standardizes maximum taper angles up to 15 degrees.
Configure Now
Ships as soon as 4 Days -
TSC Series Carbide Tapered Ball End Mill (for engraving), 1-Flute/Crescent Model
MISUMI
Small-diameter tapered ball type that's ideal for engraving
- Price Reduction
- TS
- General Steel
- 2 Flutes
- S (Short)
Configure Now
Ships as soon as 4 Days -
2-Flute, Tapered Blade, Short Type MG-TPDS
OSG
High toughness carbide alloy is used, providing a long service life at medium to low speeds
Configure Now
Ships as soon as 4 Days -
For Rib Grooves, Taper Type with Corner Rounding FXS-RB-TPCR
OSG
A radius end type high-rigidity taper end mill which enables rib grooves to be machined with high efficiency.
Configure Now
Ships as soon as 4 Days -
C-CTE2000 UT Coated 2-Flute Tapered
UNION TOOL
• Model: Tapered Square
• Coating: TiCN
• Number Of Flutes (sheet): 2
• Torsional Angle: With torsionConfigure Now
Ships as soon as 4 Days -
NER-2 Trapezoidal Runner End Mill
NS TOOL
• Model: Tapered Square
• Coating: Non-Coated
• Number Of Flutes (sheet): 2
• Torsional Angle (°): Standard torsion (30-40°)Configure Now
Ships as soon as 4 Days -
TSC Series Carbide Tapered End Mill, 4-Flute/for Deep Ribbing
MISUMI
Ideal for rib groove gradient machining of plastic mold
- TS
- General Steel
- 4 Flutes
Configure Now
Ships as soon as 4 Days -
TSC Series Carbide Tapered Ball End Mill, 4-Flute/Long Model
MISUMI
The tapered ball type that's ideal for the machining of deep rib grooves is made significantly more affordable
- Price Reduction
- TS
- General Steel
- 4 Flutes
- L (Long)
Configure Now
Ships as soon as 4 Days -
TSC Series Carbide End Mill for Runner Grooves, for Tapered Ball Runner Grooves/2-Flute
MISUMI
Must-haves for the runner grooving of plastic mold
- Price Reduction
- TS
- General Steel
- 2 Flutes
Configure Now
Ships as soon as 4 Days -
4-Flute, Tapered Blade, Short Type MG-TPMS
OSG
High toughness carbide alloy is used, providing a long service life at medium to low speeds
Configure Now
Ships as soon as 4 Days -
For Rib Grooves, Taper End Type FXS-RB-TPE
OSG
A high-rigidity taper end mill which enables rib grooves to be machined with high efficiency. Can also be used for processing side surfaces.
Configure Now
Ships as soon as 4 Days -
Carbide End Mill (Trapezoidal Runner) MG-TRC
OSG
Tapered blade end mill that can be used for trapezoidal runner processing. High toughness carbide alloy is used.
Configure Now
Ships as soon as 4 Days -
For Rib Grooves, Taper Ball End Type FXS-RB-TPB
OSG
A high-rigidity taper end mill which enables rib grooves to be machined with high efficiency. Can also be used for automobile curved surfaces.
Configure Now
Ships as soon as 4 Days -
C-CTE4000 UT Coated 4-Flute Tapered
UNION TOOL
• Model: Tapered Square
• Coating: TiCN
• Number Of Flutes (sheet): 4
• Torsional Angle: 30° twistConfigure Now
Ships as soon as 4 Days -
NS TOOL
• Model: Tapered Bore
• Coating: Non-Coated
• Number Of Flutes (sheet): 2
• Torsional Angle (°): Standard torsion (30-40°)Configure Now
Ships as soon as 4 Days -
Tapered Long Blade End Mill NTEL-2
NS TOOL
• Model: Tapered Square
• Coating: Non-Coated
• Number Of Flutes (sheet): 2
• Torsional Angle (°): Standard torsion (30-40°)Configure Now
Ships as soon as 4 Days -
MTE230 MUGEN-COATING Tapered End Mill
NS TOOL
• Model: Tapered Square
• Coating: TiAlN
• Number Of Flutes (sheet): 2
• Torsional Angle (°): Standard torsion (30-40°)Configure Now
Ships as soon as 4 Days -
MTB230 MUGEN-COATING Tapered Ball End Mill
NS TOOL
• Model: Tapered Bore
• Coating: TiAlN
• Number Of Flutes (sheet): 2
• Torsional Angle (°): Standard torsion (30-40°)Configure Now
Ships as soon as 4 Days -
MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing
NS TOOL
• Model: Tapered Square
• Coating: TiAlN
• Number Of Flutes (sheet): 4
• Torsional Angle (°): Weak torsion (15 to 25°)
• (γ) Neck Angle (°): 15°Configure Now
Ships as soon as 4 Days -
Carbide Tapered End Mill NTE-4
NS TOOL
• Model: Tapered Square
• Coating: Non-Coated
• Number Of Flutes (sheet): 4
• Torsional Angle (°): Standard torsion (30-40°)Configure Now
Ships as soon as 4 Days -
X Coated Taper End Mill NTE-2X
NS TOOL
• Model: Tapered Square
• Coating: TiCN
• Number Of Flutes (sheet): 2
• Torsional Angle (°): Standard torsion (30-40°)
• (γ) Neck Angle (°): 9°Configure Now
Ships as soon as 4 Days -
X Coated Taper End Mill NTE-4X
NS TOOL
• Model: Tapered Square
• Coating: TiCN
• Number Of Flutes (sheet): 4
• Torsional Angle (°): Standard torsion (30-40°)
• (γ) Neck Angle (°): 9°Configure Now
Ships as soon as 4 Days -
Tapered Long Blade End Mill NTEL-4
NS TOOL
• Model: Tapered Square
• Coating: Non-Coated
• Number Of Flutes (sheet): 4
• Torsional Angle (°): Strong torsion (45 to 60°)Configure Now
Ships as soon as 4 Days -
Tapered Medium Blade End Mill NTEM-2
NS TOOL
• Model: Tapered Square
• Coating: Non-Coated
• Number Of Flutes (sheet): 2
• Torsional Angle (°): Standard torsion (30-40°)Configure Now
Ships as soon as 4 Days -
X Coated Taper Medium Blade End Mill NTEM-2X
NS TOOL
• Model: Tapered Square
• Coating: Non-Coated
• Number Of Flutes (sheet): 2
• Torsional Angle (°): Standard torsion (30-40°)Configure Now
Ships as soon as 4 Days -
MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345
NS TOOL
• Model: Tapered Bore
• Coating: For High Hardness (Silicone-Based)
• Link Diameter (d) (mm): 6
• Number Of Flutes (sheet): 3
• Torsional Angle (°): Strong torsion (45 to 60°)Configure Now
Ships as soon as 4 Days -
Taper Long End Mill for Copper Electrode / Aluminum / Plastic DTEL
NS TOOL
• Model: Tapered Square
• Coating: Non-Coated
• Number Of Flutes (sheet): 2
• Torsional Angle (°): Weak torsion (15 to 25°)
• (γ) Neck Angle (°): 9°Configure Now
Ships as soon as 4 Days -
Taper End Mill for Copper Electrode / Aluminum / Plastic DTE
NS TOOL
• Model: Tapered Square
• Coating: Non-Coated
• Number Of Flutes (sheet): 2
• Torsional Angle (°): Weak torsion (15 to 25°)
• (γ) Neck Angle (°): 9°Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
One Cut Super Radius End Mill DV-OCSRTN
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Configure Now
Ships as soon as 4 Days -
Carbide Air Hole Solid Taper Ball End Mill AHTBE
EIKOSHA
[Features]
· For graphite electrode machining.
· With air hole.
· 2-flute type.Configure Now
Ships as soon as 4 Days -
Carbide Graphite Solid Tapered End Mill GTE
EIKOSHA
[Features]
· For graphite electrode machining.
· 2-flute type.Configure Now
Ships as soon as 4 Days -
Carbide Graphite Solid Tapered Ball End Mill GTBE
EIKOSHA
[Features]
· For graphite electrode machining.
· 2-flute type.Configure Now
Ships as soon as 4 Days
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Single Angle (θ)(deg) |
| Tip Diameter (D)(φ) |
| Model |
| Work Material |
| Flute Length (l)(mm) |
| R Size(mm) |
| Number of Flutes |
| Link Diameter (d)(mm) |
| Overall Length (L)(mm) |
| Coating |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | EIKOSHA | MISUMI | OSG | ATOM | DIJET | NS TOOL | MISUMI | MISUMI | NS TOOL | EIKOSHA | ATOM | MISUMI | OSG | OSG | UNION TOOL | NS TOOL | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | EIKOSHA | EIKOSHA | EIKOSHA | DIJET | EIKOSHA | EIKOSHA | EIKOSHA |
| Product Series | Carbide Reverse Cutter (Carbide Solid Reverse Taper End Mill) | MUGEN-COATING Extra Long Tapered Neck Ball End Mill MRBTN230L | TSC Series Carbide End Mill for Runner Grooves, for Trapezoid Runner Grooves/2-Flute | TSC Series Carbide Tapered Ball End Mill (for engraving), 1-Flute/Crescent Model | For Rib Grooves, Taper Type with Corner Rounding FXS-RB-TPCR | TSC Series Carbide Tapered End Mill, 4-Flute/for Deep Ribbing | TSC Series Carbide Tapered Ball End Mill, 4-Flute/Long Model | TSC Series Carbide End Mill for Runner Grooves, for Tapered Ball Runner Grooves/2-Flute | MUGEN-COATING PREMIUM 3-Flute Long Tapered Neck Ball End Mill MRBTNH345 | Taper Long End Mill for Copper Electrode / Aluminum / Plastic DTEL | Taper End Mill for Copper Electrode / Aluminum / Plastic DTE | ||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Specifications |
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| Single Angle (θ)(deg) | 0.5 ～ 5 | 0.5 ～ 30 | 0.5 ～ 20 | 1° ～ 30′ | 0°57' ～ 3°7' | 0.5 ～ 5 | 5 ～ 15 | 0.5 ～ 5 | 0.5 ～ 20 | 1ﾟ ～ 30' | 1° ～ 30′ | - | 0.5 ～ 7 | 0.5 ～ 1.5 | 0.5 ～ 15 | 7 ～ 15 | 0.5 ～ 2 | 0.5 ～ 2 | 5 ～ 15 | 0.5 ～ 3 | 0.5 ～ 3 | 7 ～ 15 | 0.5 ～ 2 | 0.5 ～ 7 | 0.5 ～ 10 | 0.5 ～ 20 | 0.5 ～ 20 | 1 ～ 15 | 0.25 ～ 3 | 0.5 ～ 15 | 0.5 ～ 5 | 0.5 ～ 5 | 0.5 ～ 5 | 0.5 ～ 20 | 0.5 ～ 15 | 0.5 ～ 2 | 0.5 ～ 5 | 0.5 ～ 5 | 0.5 ～ 7 | 1ﾟ ～ 30' | 1ﾟ ～ 30' | 0°50' ～ 1° | 0.5ﾟ ～ 30' | 1ﾟ ～ 30' | 1ﾟ ～ 30' |
| Tip Diameter (D)(φ) | 2 ～ 12 | 0.5 ～ 6 | 0.5 ～ 12 | 0.1 ～ 3 | 4 ～ 12 | - | 1.5 ～ 4 | 3 ～ 10 | 0.5 ～ 3 | - | 0.1 ～ 3 | - | 1 ～ 12 | 1 ～ 1.5 | 0.2 ～ 2.5 | 2 ～ 6 | 0.4 ～ 2 | - | - | 2 ～ 12 | 0.4 ～ 3 | 2 ～ 6 | - | 3 ～ 10 | - | 1 ～ 3 | 0.2 ～ 10 | - | 0.2 ～ 3 | 3 ～ 10 | 0.5 ～ 2.5 | 3 ～ 10 | 3 ～ 6 | 1 ～ 4 | 0.5 ～ 6 | - | 1 ～ 8 | 1 ～ 10 | 4 ～ 12 | 0.5 ～ 10 | - | 2 ～ 16 | - | 4 ～ 12 | - |
| Model | Tapered Radius | Tapered Square | Tapered Square | Tapered Square | Tapered Bore | Tapered Bore | Tapered Radius | Tapered Square | Tapered Square | Tapered Bore | Tapered Bore | Tapered Bore | Tapered Square | Tapered Radius | Tapered Square | Tapered Square | Tapered Square | Tapered Bore | Tapered Bore | Tapered Square | Tapered Square | Tapered Square | Tapered Bore | Tapered Square | Tapered Bore | Tapered Square | Tapered Square | Tapered Bore | Tapered Square | Tapered Square | Tapered Square | Tapered Square | Tapered Square | Tapered Square | Tapered Square | Tapered Bore | Tapered Square | Tapered Square | Tapered Square | Tapered Square | Tapered Bore | Tapered Radius | Tapered Bore | Tapered Square | Tapered Bore |
| Work Material | General Steel[○] / Heat-Treated Steel[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Graphite[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Graphite[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Graphite[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Cast Iron[○] | General Steel[○] / Aluminum[◎] / Copper[◎] / Graphite[◎] | Aluminum[◎] / Copper[◎] / Graphite[◎] | Aluminum[◎] / Copper[◎] / Graphite[◎] |
| Flute Length (l)(mm) | 3 ～ 25 | 2 ～ 24 | 2 ～ 40 | 0.5 ～ 12 | 10 ～ 33 | 0.2 ～ 10 | 3 ～ 6.5 | 12 ～ 35 | 2 ～ 10 | 4 ～ 40 | 0.5 ～ 12 | - | 5 ～ 40 | 8 ～ 12 | 0.8 ～ 8 | 5 ～ 12 | 2 ～ 12 | 4 ～ 30 | 3 ～ 7 | 8 ～ 30 | 2 ～ 40 | 4 ～ 12 | 4 ～ 25 | 10 ～ 35 | 10 ～ 35 | 9.3 ～ 20 | 0.8 ～ 35 | 1 ～ 16 | 2 ～ 40 | 10 ～ 35 | 2 ～ 4 | 10 ～ 35 | 20 ～ 35 | 5 ～ 20 | 4 ～ 30 | 0.75 ～ 4.5 | 8 ～ 64 | 4 ～ 35 | 25 ～ 50 | 4 ～ 40 | 6 ～ 50 | 3 ～ 24 | 25 ～ 50 | 25 ～ 50 | 25 ～ 50 |
| R Size(mm) | 0.3 ～ 0.5 | - | - | - | 2 ～ 6 | 0.1 ～ 5 | 0 ～ 1 | - | - | 0.5 ～ 8 | 0.05 ～ 1.5 | 0.1 ～ 0.3 | - | 0.2 | - | - | - | 0.3 ～ 1.25 | 1 ～ 3 | - | - | - | 0.3 ～ 1.25 | - | 0.5 ～ 3 | - | - | 0.1 ～ 2 | - | - | - | - | - | - | - | 0.5 ～ 2 | - | - | - | - | 0.5 ～ 5 | 0.5 ～ 3 | 2 ～ 6 | - | 2R ～ 6R |
| Number of Flutes | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 1 | 2 | multi-edged | 2 | 2 | 4 | 4 | 2 | 4 | multi-edged | 2 | multi-edged | 4 | 2 | 2 | 2 | 2 | 4 | 4 | 2 | 4 | 4 | 2 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 2 | 2 |
| Link Diameter (d)(mm) | 3 ～ 12 | 4 ～ 12 | 3 ～ 20 | 3 ～ 10 | 10 ～ 16 | 4 ～ 12 | 4 ～ 8 | 4 ～ 16 | 3 ～ 10 | 4 ～ 25 | 3 ～ 10 | 4 | 4 ～ 20 | 4 | 3 ～ 8 | 4 ～ 12 | 3 ～ 4 | 4 ～ 6 | 4 ～ 10 | 4 ～ 12 | 3 ～ 8 | 4 ～ 12 | 3 ～ 6 | 6 ～ 16 | 4 ～ 16 | 4 ～ 16 | 4 ～ 20 | 4 ～ 10 | 3 ～ 6 | 6 ～ 16 | 3 ～ 4 | 6 ～ 16 | 6 ～ 12 | 4 ～ 16 | 3 ～ 16 | 6 | 4 ～ 20 | 4 ～ 16 | 6 ～ 20 | 3 ～ 25 | 4 ～ 25 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 |
| Overall Length (L)(mm) | 40 ～ 70 | 50 ～ 70 | 40 ～ 120 | 35 ～ 50 | 160 ～ 280 | 50 ～ 140 | 40 ～ 50 | 60 ～ 90 | 35 ～ 70 | 45 ～ 90 | 35 ～ 55 | 45 | 45 ～ 110 | 45 | 38 ～ 50 | 45 ～ 75 | 40 ～ 50 | 45 ～ 70 | 40 ～ 75 | 45 ～ 90 | 35 ～ 80 | 45 ～ 75 | 35 ～ 60 | 50 ～ 90 | 50 ～ 100 | 45 ～ 100 | 45 ～ 100 | 50 ～ 70 | 40 ～ 80 | 50 ～ 90 | 35 ～ 45 | 50 ～ 90 | 60 ～ 90 | 50 ～ 90 | 35 ～ 90 | 60 ～ 110 | 50 ～ 130 | 45 ～ 90 | 90 ～ 120 | 40 ～ 110 | 55 ～ 150 | 70 ～ 220 | 90 ～ 120 | 90 ～ 120 | 90 ～ 120 |
| Coating | Non-Coated | For High Hardness (Silicone-Based) | TiAlN | - | TiAlN | TiAlN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | - | For High Hardness (Silicone-Based) | Non-Coated | TiAlN | TiCN | Non-Coated | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | TiAlN | Non-Coated | TiAlN | TiCN | Non-Coated | Non-Coated | TiAlN | TiAlN | TiAlN | Non-Coated | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | Non-Coated | Non-Coated | Non-Coated |
Loading...
Configure
Filters
-
Metric / Inch
-
Single Angle (θ)(deg)
-
Tip Diameter (D)(φ)
-
Model
-
Work Material
-
Flute Length (l)(mm)
-
R Size(mm)
-
Number of Flutes
- 1
- 2
- 3
- 4
- multi-edged
-
Link Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Coating
Brand
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy