MenuClose
Hand Taps
| Days to Ship |
|
|---|
-
Hand Taps - High Speed Steel, HT【10 Pieces Per Package】
MISUMI
Now offering the standard sizes at a limited-time-only special price (C-Value)
Configure Now
Ships as soon as Same Day Stock Items Included
-
Hand Taps - Carbide, for Hardened Steels, VX-OT
OSG
Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC or higher
Configure Now
Ships as soon as 4 Days -
Hand Taps - Carbide, Through Hole/Blind Hole Use, OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as Same Day Stock Items Included
-
Configure Now
Ships as soon as 4 Days -
Hand Taps - Carbide, for Cast Iron, N-CT FC
YAMAWA
A carbide tap suitable for thread machining of hard and brittle material such as cast iron.
Configure Now
Ships as soon as 4 Days -
Hand Taps - for Difficult-To-Cut Materials, CPM-HT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Configure Now
Ships as soon as 4 Days -
Hand Taps - for Left Hand Threads, HT(LH)
YAMAWA
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Configure Now
Ships as soon as 4 Days -
Hand Taps - High Speed Steel, Straight Fluted, HL-HT
OSG
Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.
Configure Now
Ships as soon as 4 Days -
Hand Taps - Carbide, for Light Alloys, N-CT LA
YAMAWA
A carbide tap suitable for thread cutting with aluminum casting (AC), aluminum die castings (ADC), zinc die castings (ZDC), etc.
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Hand Taps - for Stainless Steels, Oxidized, EX-SUS-HT
OSG
Suitable for stainless steel, heat resistant steel, nickel manganese steel, and others. Suitable for carbon steel and alloy steel materials.
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 11 Days -
Hand Taps - High Speed Steel, Long Shank, HL-LT
OSG
Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.
Configure Now
Ships as soon as 4 Days -
Hand Taps - Carbide, Long Shank, LT-OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
Configure Now
Ships as soon as 4 Days -
Hand Taps - High Speed Steel, Through Hole/Blind Hole Use
YAMAWA
Hand tap used for general tapping work.
[Features]
· High blade tip strength makes it suitable for work materials that are easily worn.
· More suitable for manual work compared to taps of other shapes.
· 2 types are available, with 5P or 1.5P biting threads.
· When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
· Machining with mechanical machinery is also possible.
· Has straight grooves out of consideration for scrap stow.
[Applications]
· Optimal for threading SPC/SPH and other thin steel plates or SS400/S20 or below mild steel.Configure Now
Ships as soon as 4 Days -
Hand Taps - Carbide, TiCN Coated, EHT
Nachi-Fujikoshi
Carbide tap with a TiCN coating treatment applied to the carbide base metal.
[Features]
· Excellent abrasion resistance and adhesion resistance.
· Improved chip discharge performance and service life.
[Applications]
· Ideal for mass tapping of aluminum and cast iron, etc.Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Hand Taps - Cobalt High Speed Steel, for Plastic/Resin, EX-PLA-HT
OSG
Suitable for thermosetting resins such as phenol (bakelite), epoxy, urea, and melamine.
Configure Now
Ships as soon as 4 Days -
Hand Taps - Carbide, for Die Castings, OT-DC-HT
OSG
Ideal for tapping aluminum alloy castings, etc. in large quantities with high precision automatic machines, etc.
Configure Now
Ships as soon as 4 Days -
Hand Taps - for Difficult-To-Cut Materials, Long Shank, CPM-LT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Configure Now
Ships as soon as 4 Days -
Hand Taps - High Speed Steel, Short Chamfer, MG-HT
YAMAWA
There is less than 1 chamfer thread, making it ideal for blind holes without any spare depth in the pilot hole.
Configure Now
Ships as soon as 4 Days -
Hand Taps - High Speed Steel, TiN Coated, AXE-HT
YAMAWA
The blade shape adopted is less prone to damage during machining of aluminum alloy castings, etc. Achieves a longer life.
Configure Now
Ships as soon as 4 Days -
Hand Taps - High Speed Steel, Helical Insert Coil, STI-HT
YAMAWA
A comparatively soft material product, used for female screw reinforcement and increased durability processing for insertion in insert coils after threading.
Configure Now
Ships as soon as 4 Days -
Hand Taps - High Speed Steel, for Insert Coils, AL-HT
YAMAWA
Hand tap for machining female threads for inserting insert coils.
[Features]
· Blade designed to be ideal for aluminum type work materials, enabling stable female thread machining to be performed.
· 2 types are available, with 5P or 1.5P biting threads, to suit the application used.
· Screw precision in accordance with class 1b.
· Work material: Aluminum rolled material, aluminum alloy casting, zinc alloy casting.
[Applications]
Ideal for machining female threads for inserting insert coils after threading.Configure Now
Ships as soon as 4 Days
| Brand |
|---|
| Product Series |
| Days to Ship |
| Thread Types |
| Nominal Thread Size |
| Pitch (P) Thread Count(mm) |
| Number of Chamfered Threads Lcf |
| Tool Material Type |
| Work Material |
| Tap Model |
| Bore Model |
| Coating |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | OSG | OSG | OSG | MISUMI | SKC | YAMAWA | OSG | YAMAWA | OSG | YAMAWA | OSG | OSG | OSG | ENGINEER | OSG | OSG | YAMAWA | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | YAMAWA | YAMAWA | YAMAWA | YAMAWA |
| Product Series | Hand Taps - Cobalt High Speed Steel, for Plastic/Resin, EX-PLA-HT | Hand Taps - for Difficult-To-Cut Materials, Long Shank, CPM-LT | |||||||||||||||||||||||||
| Days to Ship |
Same Day Stock Items Included | 4 Days | 4 Days | 4 Days |
Same Day Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 11 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Thread Types | Meter | Meter | Meter | Meter / Unified / Wit / Perforation | Meter | Meter | Meter / Unified | Meter | Meter | Meter / Unified | Meter | Meter | Meter | Meter | - | Meter / Unified | Meter | Meter / Unified / Perforation | Meter | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| Nominal Thread Size | M3 ～ M10 | M2 ～ M20 | M1.4 ～ M24 | 1UNS ～ M38 | M3 ～ M10 | M13 | No.10-32UNF ～ M24 | M12 | M2.5 ～ M8 | No8UN ～ M16 | M1.4 ～ M20 | M3 ～ M12 | M10 | M16 | M1.4 | No4UN ～ M12 | M3 ～ M24 | No.10-24UNC ～ 9/64SM40 | M3 ～ M12 | 3/8UN ～ M22 | M10 | M3 ～ M12 | M8 | M2 | M6 ～ M12 | M12 | M20 |
| Pitch (P) Thread Count(mm) | 0.5 ～ 1.5 | 0.4 ～ 2.5 | 0.3 ～ 3 | 0.5 ～ 72 | 0.5 ～ 1.5 | 0.5 | 0.3 ～ 3 | 1.75 | 0.45 ～ 0.75 | 1.5 ～ 32 | 0.3 ～ 2.5 | 0.5 ～ 1.75 | 1.5 | 1.5 | 0.3 | 1 ～ 40 | 0.5 ～ 3 | 0.25 | 0.5 ～ 1.75 | 1.25 ～ 16 | 1.5 | 0.5 ～ 1.75 | 1.25 | 0.4 | 1 ～ 1.75 | 1.25 | 2.5 |
| Number of Chamfered Threads Lcf | 1.5 P ～ 9 P | 3P | 1.5P ～ 3P | 1.5P ～ 9P | 1.5 P ～ 3 P | 5P | 1.5P ～ 3P | 2P ～ 5P | 5P | 1.5P ～ 5P | 1.5P ～ 3P | 2.5P ～ 5P | 5P | 1.5P | - | 1.5P ～ 5P | 1.5P ～ 3P | 1.5P ～ 5P | 1.5P ～ 3P | 1.5P ～ 5P | 3P | 1.5P ～ 3P | 2P | 1P | 1.5P | 1.5P | 1.5P |
| Tool Material Type | Vanadium High-Speed Steel | Carbide | Carbide | High-Speed Steel | Carbide | - | Carbide | Powdered High-Speed Steel | High-Speed Steel | High-Speed Steel | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | - | High-Speed Steel | Carbide | High-Speed Steel | Carbide | Vanadium High-Speed Steel | Cobalt High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | High-Speed Steel |
| Work Material | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] | High-Hardness Steel (50 - 60 HRC)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[◎] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Cast Steel (SC)[○] / Cast Iron (FC)[○] / Rolled Aluminum Material (AL)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Heat-Treated Steel (45 - 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[◎] | Copper (Cu)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Heat-Treated Steel (45 - 55 HRC)[◎] | Stainless Steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] | - | Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[◎] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Cast Iron (FC)[◎] / Copper (Cu)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Cast Iron (FC)[○] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[◎] / Thermosetting Plastic (Bakelite, Phenol etc.)[○] / Thermoplastic (PVC, Nylon etc.)[◎] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] | Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Cast Iron (FC)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[◎] |
| Tap Model | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap |
| Bore Model | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | - | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | - | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes |
| Coating | None | Included | None | None | None | - | None | None | None | None | None | Included | None | None | - | None | None | None | Included | None | Included | None | None | None | Included | None | - |
| Coating Type | - | TiCN / Others | Non-Coated | Non-Coated | - | - | - | Non-Coated | - | Non-Coated | - | TiCN | Non-Coated | Non-Coated | - | Non-Coated | Non-Coated | - | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | TiN | - | Non-Coated |
| Overall Length (L)(mm) | 46 ～ 75 | 40 ～ 105 | 34 ～ 120 | 36 ～ 165 | 46 ～ 75 | - | 34 ～ 120 | 82 | 46 ～ 70 | 60 ～ 95 | 34 ～ 105 | 46 ～ 82 | 75 | 95 | - | 100 ～ 150 | 100 ～ 150 | 36 ～ 105 | 46 ～ 82 | 120 ～ 150 | 75 | 46 ～ 82 | 100 | 42 | 62 ～ 82 | 95 | 120 |
Loading...
Configure
Filters
-
Thread Types
-
Metric / Inch
-
Nominal Thread Size
- No.10-32UNF
- No.10-24UNC
- No.4-48UNF
- No.4-40UNC
- No.5-40UNC
- No.6-32UNC
- No.8-32UNC
- 1UNS
- M1
- No1UN
- 1"1/4UN
- W1"1/4
- 1"1/8UN
- 1"1/16UN
- 1/2-20UNF
- 1/2-13UNC
- 1/4UN
- 1/4-28UNF
- 1/4-20UNC
- M1.4
- M1.6
- M1.7
- M1.8
- M2
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- 3/4UN
- 3/4-16UNF
- 3/4-10UNC
- 3/8UN
- 3/8-24UNF
- 3/8-16UNC
- M3.5
- M4
- No4UN
- M4.5
- M5
- 5/8-18UNF
- 5/8-11UNC
- 5/16UN
- SM5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- M5.5
- M6
- No6UN
- M7
- 7/16UN
- 7/16-20UNF
- 7/16-14UNC
- SM7/32
- M8
- No8UN
- M9
- 9/64SM40
- M10
- No10UN
- M11
- SM11/32
- M12
- No12UN
- M13
- M14
- M15
- M16
- M18
- M20
- M22
- M24
- M26
- M28
- M33
- M35
- M38
-
Pitch (P) Thread Count(mm)
-
Number of Chamfered Threads Lcf
-
Tool Material Type
-
Work Material
- Low-Carbon Steel (C Content of 0.25% or Less)
- Medium-Carbon Steel (C Content 0.25 - 0.45%)
- High-Carbon Steel (C Content Exceeding 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (SUS)
- Heat-Treated Steel (25 - 35 HRC)
- Heat-Treated Steel (35 - 45 HRC)
- Heat-Treated Steel (45 - 55 HRC)
- High-Hardness Steel (50 - 60 HRC)
- Tool Steel (Before SKD Quenching)
- Cast Steel (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass Cast Iron (BsC)
- Bronze (PB)
- Rolled Aluminum Material (AL)
- Cast Aluminum Alloy (AC, ADC)
- Cast Magnesium Alloy (MC)
- Zinc Alloy Castings (ZDC)
- Titanium Alloy (Ti-6Al-4V Equivalent)
- Nickel-Based Alloy (Inconel Equivalent)
- Thermosetting Plastic (Bakelite, Phenol etc.)
- Thermoplastic (PVC, Nylon etc.)
-
Tap Model
-
Bore Model
-
Coating
-
Coating Type
-
Overall Length (L)(mm)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy