MenuClose
OSG Chamfering & Centering Tools
Select a subcategory
| Days to Ship |
|
|---|
-
Configure Now
Ships as soon as 4 Days -
2-Flute Spiral Chamfering Cutter FX-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P
OSG
[Features]
・ Unique 3-flute specification suppresses chatter during machining and realizes high efficiency and high feed machining.
・ 40° twist and wide gullet combine sharpness and finished surface are achieved at a high level.
・ Returns and burrs are drastically reduced.
・ Excellent cutting chip discharge.Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
2-Flute Spiral Chamfering Cutter (for Copper and Aluminum Alloys) CA-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
Configure Now
Ships as soon as 4 Days -
OSG
TiN coating enables higher speed and longer service life compared to NC-LDS
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series
OSG
[Features]
· FX coating with excellent oxidation resistanceConfigure Now
Ships as soon as 4 Days -
Electrodeposition Diamond Router ED-EM
OSG
Standard in-stock item, sold by designated agencies
[Features]
· Suitable for machining with lower cutting depth and brittle composites.
· Supports machinable ceramics processing as well.Configure Now
Ships as soon as 4 Days -
FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series
OSG
[Features]
· FX coating with excellent oxidation resistanceConfigure Now
Ships as soon as 4 Days -
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
・ Unique 3-flute specification suppresses chattering during machining and realizes high efficiency and high feed machining
・ 40° twist and wide gullet combine sharpness and finished surface are achieved at a high level.
・ The return and burr are drastically reduced
・ Excellent cutting chip dischargeConfigure Now
Ships as soon as 4 Days -
WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P
OSG
[Features]
・ Unique 3-flute specification suppresses chatter during machining and realizes high efficiency and high feed machining.
・ 40° twist and wide gullet combine sharpness and finished surface are achieved at a high level.
・ Returns and burrs are drastically reduced.
・ Excellent cutting chip discharge.Configure Now
Ships as soon as 4 Days -
OSG
Tip angles are available in 90° (45° chamfer), 120° and 130° (EX-Gold drill centering for inclined/curved surfaces).
Configure Now
Ships as soon as 4 Days -
Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS
OSG
Ideal for chamfering deep parts with a tip angle of 90°
Configure Now
Ships as soon as 4 Days -
Leading Drill, Carbide FX Coating FX-LDS
OSG
It can be used not only for chamfering, but also centering with high speed and long service life
Configure Now
Ships as soon as 4 Days -
2-Flute, Corner Rounding Type FX-ECR
OSG
Dedicated tool for R chamfering. High-toughness carbide alloy is used as base material, enabling use for a wide range of work materials.
Configure Now
Ships as soon as 4 Days -
2-Flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC
OSG
Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.
Configure Now
Ships as soon as 4 Days -
2-Flute, Long Shank, Spiral Chamfering Cutter (for Copper and Aluminum Alloys) CA-LS-SCC
OSG
Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
Configure Now
Ships as soon as 4 Days -
V-XPM-ECR HSS Chamfer Series V Coat XPM 3 Blade Corner Rounding
OSG
Powdered HSS XPM corner rounding cutter with V-coating.
Configure Now
Ships as soon as 4 Days -
VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-Speed Steel Long Shank
OSG
Ideal for chamfering deep parts with a tip angle of 90°
Configure Now
Ships as soon as 4 Days -
WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Configure Now
Ships as soon as 4 Days
| Brand |
|---|
| Product Series |
| Days to Ship |
| Applications |
| Point Angle(deg) |
| Tool Diameter (D)(mm) |
| Work Material |
| Single Blade/Double Blade |
| Peripheral Blade Availability |
| Tool Material Type |
| Coating Presence |
| Coating Type |
| R Size(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | 2-Flute Spiral Chamfering Cutter (for Copper and Aluminum Alloys) CA-SCC | FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series | FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series | WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P | 2-Flute, Long Shank, Spiral Chamfering Cutter (for Copper and Aluminum Alloys) CA-LS-SCC | 3-Flute, Long Shank, Chamfering Cutter (Negative Type) LS-HSCT-N | 3-Flute, Long Shank, Chamfering Cutter (Positive Type) LS-HSCT-P | V-XPM-ECR HSS Chamfer Series V Coat XPM 3 Blade Corner Rounding | VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-Speed Steel Long Shank | WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N | |||||||||||||||
| Days to Ship | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Applications | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Hole Chamfer | - | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | - | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Chamfering / Horizontal | - | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | R Chamfer | Centering (Positioning) / Hole Chamfer | - |
| Point Angle(deg) | 90 | 90 | 60 ～ 120 | - | 90 | 90 | 60 ～ 120 | 90 | 60 | - | 90 | 90° | - | 90 ～ 130 | 90 | 90 | - | 90 | 90 | 90 | 90 | - | - | 90 | - |
| Tool Diameter (D)(mm) | 1 ～ 2 | 0.8 ～ 1 | 4.3 ～ 37 | - | 3 ～ 25 | 0.8 ～ 1 | 3 ～ 25 | 1 ～ 2 | 1 ～ 3.8 | 4 ～ 12 | 1 ～ 3.8 | - | - | 3 ～ 25 | 16 ～ 25 | 16 ～ 25 | 0.5 ～ 1.5 | 0.8 ～ 1 | 0.8 ～ 1 | 1 ～ 2 | 1 ～ 2 | - | 3 ～ 10 | 3 ～ 25 | - |
| Work Material | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | - | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | General Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] |
| Single Blade/Double Blade | Single Blade | Single Blade | Single Blade | - | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | - | Single Blade | Single Blade | - | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | - |
| Peripheral Blade Availability | None | None | Included | - | None | None | None | None | None | - | None | None | - | None | None | None | None | None | None | None | None | None | Included | Included | - |
| Tool Material Type | Carbide | Carbide | High-Speed Steel | Carbide | Powdered High-Speed Steel | Carbide | High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Carbide |
| Coating Presence | None | Included | Included | Included | Included | None | Included | None | Included | Included | Included | Included | Included | None | Included | Included | Included | Included | None | None | None | Included | Included | Included | Included |
| Coating Type | Non-Coated | TiAlN | Others | Others | TiCN | Non-Coated | TiN | Non-Coated | TiAlN | - | TiAlN | - | Others | Non-Coated | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | Non-Coated | TiCN | TiCN | TiCN | Others |
| R Size(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.1 ～ 2 | - | - | - | - | - | 0.5 ～ 4 | - | - |
Loading...
Configure
Filters
-
Applications
-
Centering (Positioning)
-
Hole Chamfer
-
Chamfering / Horizontal
-
V Groove
-
R Chamfer
-
Engraving
-
Drilling
-
Others
-
Centering (Positioning)
-
Metric / Inch
-
Point Angle(deg)
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1–6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2–10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3~14
- 3 to 15
- 3.1
- 3.15
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 16
- 16.15
- 16.3
- 16.5
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 25.4
- 26
- 26.5
- 26.6
- 27
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 75.5
- 76
- 80
- 90
- 95
- 100
-
Work Material
-
Single Blade/Double Blade
-
Peripheral Blade Availability
-
Tool Material Type
- High-Speed Steel
- Cobalt High-Speed Steel
- Powdered High-Speed Steel
- Carbide
-
Coating Presence
-
Coating Type
-
R Size(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11~15
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16–20
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Brand
-
- MISUMI (43)
- FUJIGEN (74)
- NOGA JAPAN (47)
- IWATATOOL (46)
- YAMAWA (42)
- OSG (25)
- GUHRING (24)
- MAKOTOLOY (22)
- EIKOSHA (19)
- THE CUT (17)
- BIG DAISHOWA (15)
- ESCO (14)
- ILIX (9)
- NINE9 (9)
- OKABE (9)
- ATOM (8)
- KYOWASEIKO (7)
- S&K (7)
- TAIYO TOOL (6)
- FUKUDA (5)
- NS TOOL (5)
- OKAZAKI (5)
- DIJET (4)
- DIXI (4)
- ASAHI TOOLS (3)
- DAIICHITOOL (2)
- Trusco Nakayama (2)
- 7 LEADERS (1)
- ALPEN (1)
- MAPAL (1)
- Poulten&Graf (1)
- RUKO (1)
- SKC (1)
- STARM (1)
- UNION TOOL (1)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy