Days to Ship |
|
---|
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°
MAKOTOLOY
[Features]
·1 pc. of V-cut end mill can be used for various purposes such as centering countersinking, inner chamfering, outer peripheral chamfering, side machining, V-groove, drilling, and is ideal for MC and NC machining
·Since the cutting tip is close to the V edge, the residue on the bottom during V-groove machining is very few
·Since it is based on a carbide end mill with a right blade and a right twist of 30°, the sharpness is one of the best and the discharge of cutting chips is also good
·Since the ultra-fine carbide alloy is used as the carbide material, it has a lifespan approx. 10 times longer than that of HSS end mill. Furthermore, the V-cut end mill coating series has a long lifespan and increases cutting speed to shorten machining time
・ Standard type
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.
Configure Now
Ships as soon as | 4 Days |
---|
Carbide V Cut End Mill Long Type Coated Series AMVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.
Configure Now
Ships as soon as | 4 Days |
---|
V Spot Carbide Drill, Standard Type, TiN Coat, 90°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.
· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.
Configure Now
Ships as soon as | 4 Days |
---|
V Spot Carbide Drill, Standard Type, TiN Coat, 120°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.
Configure Now
Ships as soon as | 4 Days |
---|
V Spot Carbide Drill, Long Type, TiN Coat, 90°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.
· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.
Configure Now
Ships as soon as | 4 Days |
---|
V Spot Carbide Drill, Long Type, TiN Coat, 120°
MAKOTOLOY
[Features]
· Higher positioning precision than normal twist drills thanks to the small chisel edge.
· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.
Configure Now
Ships as soon as | 4 Days |
---|
Brand |
---|
Product Series |
Days to Ship |
Applications |
Point Angle(deg) |
Tool Diameter (D)(mm) |
Work Material |
Single Blade/Double Blade |
Peripheral Blade Availability |
Tool Material Type |
Coating Presence |
Coating Type |
R Size(mm) |
Brand | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60° | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60° | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120° | |||||||
Days to Ship | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
Applications | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering / Horizontal | Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove / Drilling | Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove / Drilling | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer |
Point Angle(deg) | 120 | 60 | 60 | 90 | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 60 | 90 | 120 | 90 | 120 | 90 | 120 |
Tool Diameter (D)(mm) | 1 ~ 20 | 1 ~ 20 | 1 ~ 20 | 1 ~ 20 | 1 ~ 20 | 1 ~ 20 | 3 ~ 20 | 3 ~ 20 | 3 ~ 20 | 3 ~ 20 | 3 ~ 20 | 3 ~ 20 | 0.3 ~ 0.9 | 0.3 ~ 0.9 | 0.3 ~ 0.9 | 0.3 ~ 0.9 | 0.3 ~ 0.9 | 0.3 ~ 0.9 | 3 ~ 25 | 3 ~ 25 | 3 ~ 25 | 3 ~ 25 |
Work Material | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] |
Single Blade/Double Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade |
Peripheral Blade Availability | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
Coating Presence | None | Included | None | None | Included | Included | None | None | None | Included | Included | Included | None | None | None | Included | Included | Included | Included | Included | Included | Included |
Coating Type | - | TiAlN | - | - | TiAlN | TiAlN | - | - | - | TiAlN | TiAlN | TiAlN | - | - | - | TiAlN | TiAlN | TiAlN | TiN | TiN | TiN | TiN |
R Size(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy