Days to Ship |
|
---|
Chamfering Cutter Super Mentori-Maru MTMS 20/30
THE CUT
[Features]
· Can be used like an end mill for machining materials from an un-machined state.
· Capable of ramping machining (α = 3°).
· Standard positive inserts of various manufacturers are mountable.
· Capable of high speed machining because of the 3-flute/4-flute design.
· Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used.
· The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
· The insert allows for chamfering up to C7. (depends on the insert cutting edge.)
· Change the insert material or machining conditions for use with different types of work material.
Configure Now
Ships as soon as | 4 Days |
---|
Insert For General Purpose Chamfering Cutter, MD-TD
THE CUT
[Features]
· Carbide base material for a longer tool life. As 3 cutting edges can be used, it is also economical.
Configure Now
Ships as soon as | 4 Days |
---|
Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V
THE CUT
[Features]
· No need to turn over the work material. (Also removes through-hole burrs)
· Both sides can be chamfered with the one cutter tool.
· Ultra-fine particle carbide with TiAlN coating for a longer tool life.
Configure Now
Ships as soon as | 4 Days |
---|
Mini Corner Rounding Cutter, Carbide C-CRC-V
THE CUT
[Features]
· Ideal for CNC machining.
· Capable of machining extremely thin workpieces.
· Simple regrinding/repolishing.
Configure Now
Ships as soon as | 4 Days |
---|
THE CUT
[Features]
· Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.
· Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.
· Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly longer tool life.
Configure Now
Ships as soon as | 4 Days |
---|
Double Sided Chamfering Cutter 45° DFC
THE CUT
[Features]
· Capable of V-grooving both front and back surfaces as well as the side surfaces.
· Capable of chamfering up to C2.8 for front chamfering.
· The use of a dedicated insert (4 cutting edges) delivers high precision machining.
Configure Now
Ships as soon as | 4 Days |
---|
Chamfering and Centering Tool - O-Ring Seat Surface Cutter, MSSC-M
THE CUT
[Features]
· A standard throw-away type capable of machining that previously was only possible with fabricated burnishing types or brazed type cutters.
· Consolidates all the steps; from seat machining to the R machining of the top surface to the counterboring of each screw.
· Requires no regrinding/repolishing, significantly reducing tool costs and running costs.
Configure Now
Ships as soon as | 4 Days |
---|
Insert For New Tornado MT-CP/CC
THE CUT
[Features]
Cutting speed (m/min): 60 to 150
Feed speed (mm/t): 0.02 to 0.08
Set screw: MST-4S, MST-2.5S, MST-3S, MST-2 (M5), MST-2L040 (M6)
Configure Now
Ships as soon as | 4 Days |
---|
Chamfering and Centering Tool Accessory - Dedicated Insert for Double-Sided Cutter
THE CUT
Dedicated insert MT-SDM/H for THE CUT replaceable insert double-face chamfer tool.
Configure Now
Ships as soon as | 4 Days |
---|
Insert For Seat Surface Cutter, MT-DC
THE CUT
[Features]
Cutting speed (m/min): 40 to 100
Feed rate (mm/t): 0.04 to 0.1
Wrench: MFT-8/MFT-15
Configure Now
Ships as soon as | 4 Days |
---|
Front And Back Chamfering Cutter MTMS-WM/MTMA
THE CUT
[Features]
· Can simultaneously chamfer the side surfaces of plate materials as well as the front and back surfaces.
· The insert comprises of a carbide base material for a longer tool life. As 3 cutting edges can be used, it is also economical.
Configure Now
Ships as soon as | 4 Days |
---|
General Purpose Chamfering Cutter Kiremen MTMB
THE CUT
[Features]
· The dedicated insert and original body design provide excellent sharpness with no chatter.
· Uses special steel for the body, ensuring excellent wear resistance and outstanding durability.
· Good engagement and centripetal force enabling easy drilling press work.
· A type in which the insert can be interchanged so no regrinding/repolishing required. Has lower running costs than countersink types.
· The insert comprises of a carbide base material for a longer tool life. As 3 cutting edges can be used, it is also economical.
Configure Now
Ships as soon as | 4 Days |
---|
THE CUT
[Features]
· Capable of spot cutting.
· A type in which the insert can be interchanged so no regrinding/repolishing required.
· Features a highly rigid body and dedicated insert for high-efficiency machining.
· Can be used like an end mill for machining materials from an un-machined state.
· Positioning precision is further increased for nose R0.4.
Configure Now
Ships as soon as | 4 Days |
---|
Chamfering and Centering Tool - Super Mentori-Maru Zero for Automatic Lathes, MTMS
THE CUT
[Features]
· Employs shank diameters of ø7 and ø10 specialized for automatic lathes.
· Capable of spot cutting.
· Dedicated insert for nose R0.4 further improves positioning precision.
· A type in which the insert can be interchanged so no regrinding/repolishing required.
Configure Now
Ships as soon as | 4 Days |
---|
Chamfering Cutter Super Mentori-Maru MTMS 6.5/9
THE CUT
[Features]
· Uses a positive lathe insert for a light cutting sharpness.
· Standard positive inserts of various manufacturers are mountable.
· Capable of high speed machining because of the 3-flute design.
· Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used (however, the screws need to be changed).
· The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
· With the insert, the MTMS9 is capable of machining up to C7 and the MTMS6.5 up to C4.5. (depends on the insert cutting edge.)
· Change the insert material or machining conditions for use with different types of work material.
· Can be used like an end mill for machining materials from an un-machined state.·
Configure Now
Ships as soon as | 4 Days |
---|
Insert For Super Mentori-Maru ZERO
THE CUT
[Features]
· The unique shape enables high precision machining.
Configure Now
Ships as soon as | 4 Days |
---|
Super Mentori-Maru ZERO For Lathes, NC-MT
THE CUT
[Features]
· An internal lubrication specification and shank design specialized for use with a lathe.
· Capable of spot cutting.
· A type in which the insert can be interchanged so no regrinding/repolishing required.
· Features a highly rigid body and dedicated insert for high-efficiency machining.
Configure Now
Ships as soon as | 4 Days |
---|
Brand |
---|
Product Series |
Days to Ship |
Applications |
Point Angle(deg) |
Tool Diameter (D)(mm) |
Work Material |
Single Blade/Double Blade |
Peripheral Blade Availability |
Tool Material Type |
Coating Presence |
Coating Type |
R Size(mm) |
Brand | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V | Chamfering and Centering Tool - O-Ring Seat Surface Cutter, MSSC-M | Chamfering and Centering Tool Accessory - Dedicated Insert for Double-Sided Cutter | Chamfering and Centering Tool - Super Mentori-Maru Zero for Automatic Lathes, MTMS | |||||||||||||
Days to Ship | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
Applications | Hole Chamfer / Chamfering / Horizontal / V Groove / Others | - | Hole Chamfer / Drilling / Others | R Chamfer | Centering (Positioning) / Chamfering / Horizontal / V Groove / Drilling / Others | Hole Chamfer / V Groove | Hole Chamfer | - | Hole Chamfer | - | Chamfering / Horizontal | Hole Chamfer | Hole Chamfer / Chamfering / Horizontal / V Groove / Others | Hole Chamfer / Chamfering / Horizontal / V Groove / Others | Hole Chamfer / Chamfering / Horizontal / V Groove / Others | - | Hole Chamfer / Others |
Point Angle(deg) | - | - | 90° | - | 60 ~ 120 | - | - | - | - | - | - | - | - | - | - | - | - |
Tool Diameter (D)(mm) | - | - | 2.8 ~ 12 | 1 ~ 2.5 | 3 ~ 20 | 11 ~ 20 | - | - | - | - | 29 ~ 38 | Max: 25, Min: 4.2 ~ Max: 41, Min: 20 | 12 ~ 15.2 | 13 | - | - | 12 ~ 14.5 |
Work Material | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Aluminum[○] | General Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | - | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | - | - | - | - | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | - |
Single Blade/Double Blade | - | - | Single Blade | Single Blade | Single Blade | - | - | - | - | - | - | - | - | - | - | - | - |
Peripheral Blade Availability | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tool Material Type | - | - | Carbide | Carbide | Carbide | - | - | - | Carbide | - | - | - | - | - | - | - | - |
Coating Presence | - | - | Included | Included | Included | - | - | - | Included / None | - | - | - | - | - | - | - | - |
Coating Type | - | - | TiAlN | TiAlN | TiAlN | - | - | - | TiAlN | - | - | - | - | - | - | - | - |
R Size(mm) | - | - | - | 0.25 ~ 2.5 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy