Carbide Straight Blade Tapered Corner Angle End Mill, 2-Flute, Tip Diameter Designation Type
Part Number
Configure to get your Part Number
Part Number |
---|
BSTCADC3-[1-2.5/0.001]-[5-80/1]-[0-59/1]-[0.2-2.3/0.001]-[0-30/1]-[0-59/1]-[0.5-10/0.5]-[F,T] |
BSTCADC3-[1-2.5/0.001]-[5-80/1]-[0-59/1]-[0.2-2.3/0.001]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D,MAX]-[F,T] |
BSTCADC4-[1-3.5/0.001]-[5-80/1]-[0-59/1]-[0.2-3.3/0.001]-[0-30/1]-[0-59/1]-[0.5-14/0.5]-[F,T] |
BSTCADC4-[1-3.5/0.001]-[5-80/1]-[0-59/1]-[0.2-3.3/0.001]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D,MAX]-[F,T] |
BSTCADC6-[1-5.5/0.001]-[5-80/1]-[0-59/1]-[0.2-5.3/0.001]-[0-30/1]-[0-59/1]-[0.5-22/0.5]-[F,T] |
BSTCADC6-[1-5.5/0.001]-[5-80/1]-[0-59/1]-[0.2-5.3/0.001]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D,MAX]-[F,T] |
BSTCADC8-[1-7.5/0.001]-[5-80/1]-[0-59/1]-[0.2-7.3/0.001]-[0-30/1]-[0-59/1]-[0.5-28/0.5]-[F,T] |
BSTCADC8-[1-7.5/0.001]-[5-80/1]-[0-59/1]-[0.2-7.3/0.001]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D,MAX]-[F,T] |
BSTCADC10-[1-9.5/0.001]-[5-80/1]-[0-59/1]-[0.2-9.3/0.001]-[0-30/1]-[0-59/1]-[0.5-35/0.5]-[F,T] |
BSTCADC10-[1-9.5/0.001]-[5-80/1]-[0-59/1]-[0.2-9.3/0.001]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D,MAX]-[F,T] |
BSTCADC12-[1-11.5/0.001]-[5-80/1]-[0-59/1]-[0.2-11.3/0.001]-[0-30/1]-[0-59/1]-[0.5-36/0.5]-[F,T] |
BSTCADC12-[1-11.5/0.001]-[5-80/1]-[0-59/1]-[0.2-11.3/0.001]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D,MAX]-[F,T] |
BSTCADC16-[1-15.5/0.001]-[5-80/1]-[0-59/1]-[0.2-15.3/0.001]-[0-30/1]-[0-59/1]-[0.5-48/0.5]-[F,T] |
BSTCADC16-[1-15.5/0.001]-[5-80/1]-[0-59/1]-[0.2-15.3/0.001]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D,MAX]-[F,T] |
STCADEM3-[1-2.5/0.01]-[5-80/1]-[0-59/1]-[0.2-2.3/0.01]-[0-30/1]-[0-59/1]-[0.5-10/0.5]-[F,T] |
STCADEM3-[1-2.5/0.01]-[5-80/1]-[0-59/1]-[0.2-2.3/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D,MAX]-[F,T] |
STCADEM4-[1-3.5/0.01]-[5-80/1]-[0-59/1]-[0.2-3.3/0.01]-[0-30/1]-[0-59/1]-[0.5-14/0.5]-[F,T] |
STCADEM4-[1-3.5/0.01]-[5-80/1]-[0-59/1]-[0.2-3.3/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D,MAX]-[F,T] |
STCADEM6-[1-4.5/0.01]-[5-80/1]-[0-59/1]-[0.2-4.3/0.01]-[0-30/1]-[0-59/1]-[0.5-22/0.5]-[F,T] |
STCADEM6-[1-4.5/0.01]-[5-80/1]-[0-59/1]-[0.2-4.3/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D,MAX]-[F,T] |
STCADEM8-[1-7.5/0.01]-[5-80/1]-[0-59/1]-[0.2-7.3/0.01]-[0-30/1]-[0-59/1]-[0.5-28/0.5]-[F,T] |
STCADEM8-[1-7.5/0.01]-[5-80/1]-[0-59/1]-[0.2-7.3/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D,MAX]-[F,T] |
STCADEM10-[1-9.5/0.01]-[5-80/1]-[0-59/1]-[0.2-9.3/0.01]-[0-30/1]-[0-59/1]-[0.5-35/0.5]-[F,T] |
STCADEM10-[1-9.5/0.01]-[5-80/1]-[0-59/1]-[0.2-9.3/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D,MAX]-[F,T] |
STCADEM12-[1-11.5/0.01]-[5-80/1]-[0-59/1]-[0.2-11.3/0.01]-[0-30/1]-[0-59/1]-[0.5-36/0.5]-[F,T] |
STCADEM12-[1-11.5/0.01]-[5-80/1]-[0-59/1]-[0.2-11.3/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D,MAX]-[F,T] |
STCADEM16-[1-15.5/0.01]-[5-80/1]-[0-59/1]-[0.2-15.3/0.01]-[0-30/1]-[0-59/1]-[0.5-48/0.5]-[F,T] |
STCADEM16-[1-15.5/0.01]-[5-80/1]-[0-59/1]-[0.2-15.3/0.01]-[0-30/1]-[0-59/1]-[1D,2D,3D,4D,MAX]-[F,T] |
Loading...
Model Number | Blade Diameter D 0.001mm Unit Specification | Corner Angle (Single Corner) * θ1 °−min 1' Unit Specification | Tip Diameter D1 0.01mm Unit Specification | Single Corner* θ2 °−min 1' Unit Specification | Blade Length* ℓ 0.5 mm Unit Specification | Bottom Blade Shape (Selection) | Overall Length L | ||
Shank diameter d | |||||||||
Specified Range | ℓmax. | ||||||||
BSTCADC (For boss hole machining) | 3 | 1.000 to 2.500 | 5°0′ to 80°0′ θ1>θ2* | 0.20 ≤ D1 ≤ D−0.2 | 0°15' to 30°00' θ1>θ2* | (1) 0.5 ≤ ℓ ≤ D×4 and (2) ℓ ≤ ℓmax. (See table at right) and (3) | 10.0 | T (Indented Center) F (Flat) | 40 |
4 | 1.000 to 3.500 | 14.0 | 50 | ||||||
6 | 1.000 to 5.500 | 22.0 | 60 | ||||||
8 | 1.000 to 7.500 | 28.0 | 60 | ||||||
10 | 1.000 to 9.500 | 35.0 | 80 | ||||||
12 | 1.000 to 11.500 | 36.0 | 80 | ||||||
16 | 1.000 to 15.500 | 48.0 | 100 |
Model Number | Blade Diameter D 0.01mm Unit Specification | Corner Angle (Single Corner) * θ1 °−min 1' Unit Specification | Tip Diameter D1 0.01mm Unit Specification | Single Corner* θ2 °−min 1' Unit Specification | Blade Length* ℓ 0.5 mm Unit Specification | Bottom Blade Shape (Selection) | Overall Length L | ||
Shank diameter d | |||||||||
Specified Range | ℓmax. | ||||||||
STCADEM (For side/fluting) | 3 | 1.00 to 2.50 | 5°0′ to 80°0′ θ1>θ2* | 0.20 ≤ D1 ≤ D−0.2 | 0°15' to 30°00' θ1>θ2* | (1) 0.5 ≤ ℓ ≤ D×4 and (2) ℓ ≤ ℓmax. (See table at right) and (3) | 10.0 | T (Indented Center) F (Flat) | 40 |
4 | 1.00 to 3.50 | 14.0 | 50 | ||||||
6 | 1.00 to 4.50 | 22.0 | 60 | ||||||
8 | 1.00 to 7.50 | 28.0 | 60 | ||||||
10 | 1.00 to 9.50 | 35.0 | 80 | ||||||
12 | 1.00 to 11.50 | 36.0 | 80 | ||||||
16 | 1.00 to 15.50 | 48.0 | 100 |
*Specify ℓ so that it meets all the conditions of (1), (2) and (3).
*Depending on the size of ℓ, all slope angles may be the blade length.
*Specify the corner angle (single corner) θ1 and single corner θ2 so that the angle is "θ1>θ2".
● BSTCADC
Click here for the cutting conditions (Cutting by end mill for carbide straight edge boss machining)
● STCADEM
Click here for cutting conditions (groove cutting with customized straight blade end mill)
Material | Ultrafine Particulate Carbide |
---|
MISUMI
Days to Ship : 5 Days
MISUMI
Days to Ship : 5 Days
MISUMI
Days to Ship : 5 Days
MISUMI
Days to Ship : 4 Days
MISUMI
Days to Ship : 5 Days
MISUMI
Days to Ship : 5 Days
MISUMI
Days to Ship : 5 Days
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy