MenuClose
Rod End Bearings & Spherical Bearings
| Days to Ship |
|
|---|
-
MISUMI
[Main Body Material]S35C; Connection thread shape: You can choose male or female threads.
- Volume Discount is available
- Lead Time Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Rod End Bearing - Female Threaded, PHS Series
THK
Highly rigid with superior abrasion and corrosion resistance.
The correct amount of lubricant can be supplied to the sliding surface via the grease nipple attached to the holder.
[Features]
· Lubrication: Lubricate before use. There is a lubrication hole and oil groove on the holder, so it can be lubricated via the grease nipple.
· Left-hand female thread identification: For left-hand female threads, the letter "L" is added. "L" is marked on the holder of the product.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Rod End Bearing - Male Threaded, POS Series
THK
This model is a highly rigid rod end that is basically the same as the female threaded model PHS, but has a male thread on the holder end.
* The rod end shown in the photo is a representative product.
Thread sizes M5 and M6 do not come with a nipple. Lubricate the bearing directly.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Rod End Bearing - Link Ball, Male Threaded Holder, BL Series
THK
The holder is perpendicular to the ball shank.
With grease pockets on the top and bottom of the spherical area, this model has high lubricity and high wear resistance.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Spherical Plain Bearing - Slide, GE and SB Series
IKO
[Features]
· Each of the inner and outer wheels features a lubrication groove and two lubrication holes.
· Not filled with grease.
· Lubricate Properly before Use- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Spherical Plain Bearing - PB Series
THK
A highly rigid spherical bearing with superior corrosion and abrasion resistance. The sliding surface of the bearing can be thoroughly lubricated from the oil groove and lubrication hole on the outer ring.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
MISUMI
Generic Spherical Bearings
- Volume Discount is available
- Lead Time Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Rod End and Spherical Plain Bearing - Insert, PHS and POS Series
IKO
[Features]
· The outer wheel features a lubrication groove and one lubrication hole.
· Not filled with grease.
· Lubricate Properly before Use- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Spherical Plain Bearing - SB Series
THK
The most widely used series in Japan. It is used for heavy loads since the spherical contact area has a large width.
The outer ring is split at two points to accommodate the inner ring.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Rod End Bearing - Link Ball, Male Threaded Holder, RBI Series
THK
The mounting bolt and holder are arranged on the same axis, allowing this model to bear an axial load.
The boot contains grease, providing high lubricity and high abrasion resistance.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Rod End Bearings - Link Ball, 90°
MISUMI
• Type: Rod End Bearings
• Rod End Bearing Type: Link Ball L- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Spherical Plain Bearing - Open, Radial, B--L Series, Inch
RBC Bearings
B-L series are designed to support heavy radial loads under misalignment. These bearings also possess moderate thrust loading capability. They are non-separable with a single fractured outer ring.
Configure Now
Ships as soon as 5 Days -
Rod End Bearings - Stainless Steel, Oil-Free
MISUMI
* Those will be the successor to PHSS/PHSOS.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 7 Days -
Rod End Bearing - Female Threaded, Oil-Free, NHS-T Series
THK
An oil free type rod end that uses self-lubricating synthetic plastic formed between the steel holder and the spherical inner ring.
The gap on the sliding surface is minimized, allowing accurate link motion to be achieved.
[Features]
· NHS-T Type (oil free type)- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Rod End Bearing - Self-Lubricating, Tapped, DIN 648 Series
JW WINCO
DIN648 Rod ends are used in controlling and linking mechanisms in all types of machines. Suitable for high load, low speed applications with hanging angles, required linear, rotational or oscillatory motions.
The external ring is made of a special bronze material which makes these rod ends self-lubricating, maintenance-free, and guaranteed lowest friction. In addition, these joints have less increase of clearance after longer operating hours than rod ends with PTFE-surface, and therefore higher life expectancy.
Operating temperature: -30°C (-22°F) to 150°C (300°F).- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 7 Days -
Rod End Bearing - Female, Stainless Steel, Two-Piece Construction, FTFE Liner, Inch
FK BEARINGS
2-PIECE Construction
Stainless Steel
PTFE Liner StandardConfigure Now
Ships as soon as 5 Days -
Spherical Plain Bearing - Two Piece, Metal-to-Metal, Precision Series, LHA and LHSS Series, Inch
HEIM Bearing (RBC Bearings)
Standard Heim spherical bearing designs include steel on steel precision spherical bearings with brass race inserts, high capacity, self-lubricating spherical bearings withFluoropolymer liners, and military standard spherical bearings. Standard material choices range from plain carbon steel to stainless steel.
Configure Now
Ships as soon as 5 Days -
Spherical Bearings - Compact with Housing
MISUMI
Misumi Original set with Generic Spherical Bearings
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Rod End Bearing - Elbow, LHS Series
IKO
[Features]
・Filled with heat-resistant grease.- Volume Discount is available
Configure Now
Ships as soon as Same Day Stock Items Included
-
Spherical Plain Bearing - Radial, Maintenance-Free, DIN ISO 12 240-1, GE--UK Series
INA (Schaeffler)
Radial spherical plain bearings comprise inner and outer rings with maintenance-free sliding layers. They are thus suitable for alternating dynamic loads.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 8 Days -
INA (Schaeffler)
Radial spherical plain bearings comprise inner and outer rings with maintenance-free sliding layers. They are thus suitable for alternating dynamic loads.
Configure Now
Ships as soon as 8 Days -
Rod End Bearing - Angled Ball Joint, Threaded Shank, DIN 71802 Series
JW WINCO
DIN 71802 angled ball joints consist of a ball socket and a ball shank. The angle of rotation for the type without safety catch is 18°. For assembly the ball is pushed through the circlip which acts as a retainer.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Rod End Bearings - Link Ball with Thread
MISUMI
• Type: Rod End Bearings
• Rod End Bearing Type: Link Ball Straight
• Main Body Material: High Strength Zinc Alloy- Volume Discount is available
- Lead Time Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Rod End Bearing - Male Threaded, Oil-Free, NOS-T Series
THK
This model is an oil free type rod end that is basically the same as the female threaded model NHS-T, but has a male thread on the holder end.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Spherical Plain Bearing - Two Piece, Metal-to-Metal, Commercial Series, COM Series, Inch
HEIM Bearing (RBC Bearings)
Commercial rod ends are produced using standard materials and manufacturing methods, and are an economical choice for industrial applications.
Configure Now
Ships as soon as 5 Days -
Rod End Bearing - Low, Male, Stainless Steel, Two-Piece Construction, FTFE Liner
FK BEARINGS
2-PIECE Construction
Heat Treated
PTFE Liner Standard- Volume Discount is available
Configure Now
Ships as soon as Same Day Stock Items Included
-
Spherical Plain Bearing - Axial, Maintenance-Free, DIN ISO 12 240-3, GE--AW Series
INA (Schaeffler)
Spherical roller bearings are designed for systems in which high loads must be supported and shaft flexing and misalignments compensated.
Configure Now
Ships as soon as 8 Days -
INA (Schaeffler)
Rod ends consist of an eye-shaped head with integral shank that forms a housing for a spherical plain bearing.
Configure Now
Ships as soon as 8 Days -
Spherical Plain Bearing - Radial, Maintenance Required, DIN ISO 12 240-1, GE--DO Series
INA (Schaeffler)
Radial spherical plain bearings comprise inner and outer rings with maintenance-free sliding layers. They are thus suitable for alternating dynamic loads.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 8 Days -
Rod End Bearing - Four Piece, Metal-to-Metal, Metric Precision Series, SF and SFG Series
HEIM Bearing (RBC Bearings)
Series SF and SFG four piece, precision, metric rod ends use brass race inserts for lubricity and clearance control. They are produced to tight tolerances for applications where a precision rod end is required in a metric size.
Configure Now
Ships as soon as 5 Days -
INA (Schaeffler)
Rod ends consist of an eye-shaped head with integral shank that forms a housing for a spherical plain bearing.
Configure Now
Ships as soon as 8 Days -
Rod End Bearing - Oil-Free, Male Threaded【1-2 Pieces Per Package】
Trusco Nakayama
• Type: Rod End Bearings
• Lubrication Method: Lubrication Free
• Connecting Thread Shape: Threads
• Rod End Bearing Type: Standard
• Main Body Material: Steel- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Rod End Bearing - External-Threaded, POS Series
Ozak Seiko
• Type: Rod End Bearings
• Lubrication Method: Lubrication
• Connecting Thread Shape: Threads
• Rod End Bearing Type: Standard
• Main Body Material: Carbon steel for construction- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Rod End Bearing - Four Piece, Precision Series, SM Series
HEIM Bearing (RBC Bearings)
Series SM four piece, precision, metric rod ends use brass race inserts for lubricity and clearance control. They are produced to tight tolerances for applications where a precision rod end is required in a metric size.
Configure Now
Ships as soon as 2 Days -
Spherical Plain Bearing - SA1 Series
THK
[Structure and Features]
· The spherical plain bearing is a self-aligning plain bearing designed for heavy loads. The inner and outer rings are made from high-carbon chromium bearing steel that is hardened, ground, phosphate-coated and seized with molybdenum disulfide (MoS2). The SA1 model can bear large radial loads and thrust loads in both directions. Furthermore, as it is highly impact resistant, the spherical plain bearing is most suited for low speed, heavy load rocking components such as the cylinder clevises or hinges of construction and civil engineering machinery, truck suspensions, and train bolster anchors.
[Types and Features]
· The SA1 model of the series is popular in Europe. The outer ring is split at one point and is narrower and thinner than the SB model, so it can be used in small spaces. Models with dust seals on both sides (SA1-UU) are also available. These seals are highly effective at keeping out dust.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Rod End Bearing - Four Piece, Metal-to-Metal, Metric Precision Series, SM and SMG Series
HEIM Bearing (RBC Bearings)
Series SM and SMG four piece, precision, metric rod ends use brass race inserts for lubricity and clearance control. They are produced to tight tolerances for applications where a precision rod end is required in a metric size.
Configure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 4 Days -
Rod End Bearing - Male, Stainless Steel, Two-Piece Construction, FTFE Liner, Inch
FK BEARINGS
2-PIECE Construction
Stainless Steel
PTFE Liner StandardConfigure Now
Ships as soon as 5 Days -
Configure Now
Ships as soon as 4 Days -
Spherical Plain Bearing - QuadLube®, Sealed, Radial, B--LSSQ Series, Inch
RBC Bearings
The RBC QuadLube® spherical plain bearing is manufactured within the same envelope dimensions as standard inch and metric spherical plain bearings. The lubrication system contains four precisely machined circular grooves on the spherical surface of the inner ring. Each circular groove is connected by a lubrication groove around the circumference of the inner ring. The bearing is packed with an EP moly grease and is sealed with lip contacts seals for grease retention.
Configure Now
Ships as soon as 5 Days -
Spherical Plain Bearing - Sealed, Radial, B--LSS Series, Inch
RBC Bearings
B-LSS series are designed to support heavy radial loads under misalignment. These bearings also possess moderate thrust loading capability. They are non-separable with a single fractured outer ring.
Configure Now
Ships as soon as 5 Days -
HEIM Bearing (RBC Bearings)
LS Series Four-Piece Precision Special Purpose Spherical Bearing.
Configure Now
Ships as soon as 5 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Type |
| Rod End Bearing Type |
| Spherical Bearing Type |
| Main Body Material |
| Connecting Screw M |
| Inner Diameter d(Ø) |
| Connecting Thread Shape |
| Connecting Thread Direction |
| Ball Material |
| Liner Material |
| Allowable Incline Angle α(deg) |
| Lubrication Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | THK | THK | THK | IKO | THK | MISUMI | IKO | THK | THK | MISUMI | RBC Bearings | MISUMI | SKF | THK | JW WINCO | SKF | FK BEARINGS | HEIM Bearing (RBC Bearings) | MISUMI | IKO | INA (Schaeffler) | INA (Schaeffler) | JW WINCO | MISUMI | THK | HEIM Bearing (RBC Bearings) | FK BEARINGS | INA (Schaeffler) | INA (Schaeffler) | INA (Schaeffler) | HEIM Bearing (RBC Bearings) | INA (Schaeffler) | Trusco Nakayama | Igus | Ozak Seiko | HEIM Bearing (RBC Bearings) | THK | HEIM Bearing (RBC Bearings) | Igus | FK BEARINGS | Igus | RBC Bearings | RBC Bearings | HEIM Bearing (RBC Bearings) |
| Product Series | Rod End Bearing - Link Ball, Male Threaded Holder, BL Series | Rod End and Spherical Plain Bearing - Insert, PHS and POS Series | Rod End Bearing - Link Ball, Male Threaded Holder, RBI Series | Rod End Bearing - Female, Stainless Steel, Two-Piece Construction, FTFE Liner, Inch | Spherical Plain Bearing - Two Piece, Metal-to-Metal, Precision Series, LHA and LHSS Series, Inch | Spherical Plain Bearing - Radial, Maintenance-Free, DIN ISO 12 240-1, GE--UK Series | Rod End Bearing - Angled Ball Joint, Threaded Shank, DIN 71802 Series | Spherical Plain Bearing - Two Piece, Metal-to-Metal, Commercial Series, COM Series, Inch | Rod End Bearing - Low, Male, Stainless Steel, Two-Piece Construction, FTFE Liner | Spherical Plain Bearing - Axial, Maintenance-Free, DIN ISO 12 240-3, GE--AW Series | Spherical Plain Bearing - Radial, Maintenance Required, DIN ISO 12 240-1, GE--DO Series | Rod End Bearing - Four Piece, Metal-to-Metal, Metric Precision Series, SF and SFG Series | Rod End Bearing - Oil-Free, Male Threaded【1-2 Pieces Per Package】 | Rod End Bearing - Four Piece, Metal-to-Metal, Metric Precision Series, SM and SMG Series | Rod End Bearing - Male, Stainless Steel, Two-Piece Construction, FTFE Liner, Inch | Spherical Plain Bearing - QuadLube®, Sealed, Radial, B--LSSQ Series, Inch | Spherical Plain Bearing - Sealed, Radial, B--LSS Series, Inch | ||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||
| Days to Ship |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 5 Days | 4 Days | 7 Days |
Same Day Stock Items Included | 5 Days | 7 Days | 5 Days | 5 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 8 Days | 8 Days | 5 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 5 Days |
Same Day Stock Items Included | 8 Days | 8 Days | 8 Days | 5 Days | 8 Days | 4 Days | 4 Days | 4 Days | 2 Days | 4 Days | 5 Days | 4 Days | 5 Days | 4 Days | 5 Days | 5 Days | 5 Days |
| Specifications |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
| Type | Rod End Bearings | Rod End Bearings | Rod End Bearings | Rod End Bearings | Spherical Bearing | Spherical Bearing | Spherical Bearing | Rod End Bearings / Spherical Bearing | Spherical Bearing | Rod End Bearings | Rod End Bearings | Spherical Bearing | Rod End Bearings | - | Rod End Bearings | - | - | - | - | Spherical Bearing | Rod End Bearings | - | - | - | Rod End Bearings | Rod End Bearings | - | - | - | - | - | - | - | Rod End Bearings | Spherical Bearing | Rod End Bearings | - | Spherical Bearing | - | Spherical Bearing | Rod End Bearings | Rod End Bearings | Spherical Bearing | Spherical Bearing | - |
| Rod End Bearing Type | Standard | Standard | Standard | Link Ball L | - | - | - | Standard | - | Link Ball Straight | Link Ball L | - | Standard | - | Standard | - | - | - | - | - | Link Ball L | - | - | - | Link Ball Straight | Standard | - | Standard | - | - | - | - | - | Standard | - | Standard | - | - | - | - | - | Link Ball Straight | - | - | - |
| Spherical Bearing Type | - | - | - | - | Standard | Standard | Standard | Standard | Standard | - | - | Standard | - | - | - | - | - | - | - | Flange Type, with 4 Holes | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Flange Type, with 2 Holes | - | - | Standard | - | Standard | - | - | Standard | Standard | - |
| Main Body Material | Stainless Steel ～ Steel | Steel | Steel | Aluminum ～ High Strength Zinc Alloy | Steel | Steel | Steel | High Strength Zinc Alloy ～ Steel | Steel | High Strength Zinc Alloy | Aluminum ～ High Strength Zinc Alloy | - | Stainless Steel | - | Steel | Steel | - | Stainless Steel | Stainless Steel ～ Steel | Steel | High Strength Zinc Alloy | - | - | Stainless Steel ～ Steel | High Strength Zinc Alloy | Steel | Steel | Stainless Steel | - | - | - | Chrome Molybdenum Steel ～ Stainless Steel | - | Steel | Resin | Steel | Chrome Molybdenum Steel | Steel | Chrome Molybdenum Steel | Resin | Stainless Steel | Resin | - | - | Steel |
| Connecting Screw M | M3 / M4 / M5 / M6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22 | M5 / M6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22 / M24 / M30 | M5 / M6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22 / M24 / M30 | M4 / M5 / M6 / M8 / M10 / M12 / M14 / M16 | - | - | - | M3 / M4 / M5 / M6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22 / M24 / M27 / M30 | - | M5 / M6 / M8 / M10 / M12 / M14 / M16 | M4 / M5 / M6 / M8 / M10 / M12 / M14 / M16 | - | M5 / M6 / M8 / M10 / M12 / M14 / M16 / M18 | - | M3 / M4 / M5 / M6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22 | M4 / M5 / M6 / M8 / M10 / M12 / M16 / M20 / M24 / M27 | - | - | - | - | M4 / M5 / M6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22 | - | - | M5 / M6 / M8 / M10 / M12 / M14 | M5 / M6 / M8 / M10 / M12 / M14 / M16 | M3 / M4 / M5 / M6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22 | - | - | - | - | - | - | - | M5 / M6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22 | - | M5 / M6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22 / M24 / M30 | - | - | - | - | - | M8 | - | - | - |
| Inner Diameter d(Ø) | 3 ～ 22 | - | - | - | 5 ～ 150 | 5 ～ 30 | 5 ～ 30 | 3 ～ 30 | 12 ～ 130 | - | - | 0.5 inch ～ 6 inch | - | 4 ～ 220 | - | 5 mm ～ 30 mm | 3 ～ 100 | - | 0.17 inch ～ 1 inch | 5 ～ 30 | - | 6 ～ 30 | 17 ～ 280 | - | - | - | 0.25 inch ～ 1 inch | - | 17 ～ 140 | 20 ～ 120 | 6 ～ 200 | 2 mm ～ 25 mm | 20 ～ 125 | 5 ～ 22 | 6 ～ 25 | 5 ～ 30 | 2 mm ～ 30 mm | 12 ～ 160 | 5 mm ～ 25 mm | 3 ～ 10 | - | - | 0.75 inch ～ 6 inch | 0.75 inch ～ 5 inch | 0.19 inch ～ 1.88 inch |
| Connecting Thread Shape | Threads / Taps | Taps | Threads | Threads | - | - | - | Threads / Taps | - | Threads | - | - | Threads / Taps | Threads | Taps | - | Threads / Taps | - | - | - | Taps | - | - | - | - | Threads | - | - | - | - | - | Threads | - | Threads | - | Threads | Threads | - | Threads | - | - | Threads | - | - | - |
| Connecting Thread Direction | Right-hand Thread / Left-hand Thread | Right-hand Thread / Left-hand Thread | Right-hand Thread / Left-hand Thread | Right-hand Thread / Left-hand Thread | - | - | - | Right-hand Thread / Left-hand Thread | - | Right-hand Thread / Left-hand Thread | Right-hand Thread / Left-hand Thread | - | Right-hand Thread / Left-hand Thread | Right-hand Thread | Right-hand Thread / Left-hand Thread | Right-hand Thread / Left-hand Thread | Right-hand Thread / Left-hand Thread | - | - | - | Right-hand Thread / Left-hand Thread | - | - | Right-hand Thread / Left-hand Thread | Right-hand Thread / Left-hand Thread | Right-hand Thread / Left-hand Thread | - | - | - | - | - | Right-hand Thread / Left-hand Thread | - | Right-hand Thread / Left-hand Thread | - | Right-hand Thread / Left-hand Thread | Right-hand Thread / Left-hand Thread | - | Right-hand Thread | - | - | Right-hand Thread | - | - | - |
| Ball Material | Stainless Steel ～ Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | - | Steel | Stainless Steel | - | Steel | Steel | - | Stainless Steel | Stainless Steel ～ Steel | Steel | Steel | - | - | Stainless Steel ～ Steel | - | Steel | Steel | Stainless Steel | - | - | - | Stainless Steel ～ Steel | - | Steel | Resin | Steel | Steel | Steel | Steel | Resin | Stainless Steel | Resin | Steel | Steel | Steel |
| Liner Material | Resin ～ Special Copper Alloy | Special Copper Alloy | Special Copper Alloy | - | PTFE | Special Copper Alloy | Special Copper Alloy | PTFE ～ Special Copper Alloy | - | - | - | - | Resin | - | Resin | IKOU | - | PTFE | - | Special Copper Alloy | Special Copper Alloy ～ Steel | - | - | - | - | Resin | - | PTFE | - | - | - | - | - | Resin | Resin | Special Copper Alloy | - | - | - | Resin | PTFE | Resin | - | - | - |
| Allowable Incline Angle α(deg) | - | 8 ～ 10 | 8 ～ 10 | 30 ～ 40 | 3 ～ 21 | 8 ～ 10 | - | 7 ～ 16 | 3 ～ 5 | 17 ～ 25 | 30 ～ 40 | 7 ～ 14 | 10 ～ 15 | - | 8 ～ 10 | - | - | 20 ～ 27 | - | - | 15 ～ 21 | 6 ～ 15 | 5 ～ 10 | - | 17 ～ 25 | 8 ～ 10 | - | 22 ～ 33 | 5 ～ 7 | 5 ～ 9 | 5 ～ 15 | 13 ～ 16 | 4 | 13 ～ 16 | - | 4.5 ～ 12 | 13 ～ 17 | 4 ～ 8 | 13 ～ 16 | - | 20 ～ 27 | - | 7 | 7 | - |
| Lubrication Method | - | Lubrication | Lubrication | Lubrication | Lubrication Free / Lubrication | Lubrication | - | Lubrication Free / Lubrication | Lubrication | Lubrication | - | Lubrication | Lubrication Free | - | Lubrication Free | - | - | - | - | - | Lubrication | - | - | - | - | Lubrication Free | - | - | - | - | - | - | - | Lubrication Free | - | Lubrication | - | Lubrication | - | - | - | - | Lubrication | Lubrication | - |
Loading...
Configure
Filters
-
Type
-
Rod End Bearing Type
-
Standard -
-
-
-
Spherical Bearing Type
-
Main Body Material
-
Connecting Screw M
-
Metric / Inch
-
Inner Diameter d(Ø)
- 0.17 inch
- 0.19 inch
- 0.25 inch
- 0.313 inch
- 0.32 inch
- 0.375 inch
- 0.38 inch
- 0.438 inch
- 0.44 inch
- 0.50 inch
- 0.5 inch
- 0.57 inch
- 0.625 inch
- 0.63 inch
- 0.75 inch
- 0.88 inch
- 1 inch
- 1.19 inch
- 1.25 inch
- 1.38 inch
- 1.5 inch
- 1.75 inch
- 1.88 inch
- 2 inch
- 2 mm
- 2.25 inch
- 2.5 inch
- 2.75 inch
- 3
- 3 inch
- 3 mm
- 3.25 inch
- 3.5 inch
- 3.75 inch
- 4
- 4 inch
- 4 mm
- 4.5 inch
- 5
- 5 inch
- 5 mm
- 6
- 6 inch
- 6 mm
- 8
- 8 mm
- 10
- 10 mm
- 12
- 12 mm
- 12.7
- 14
- 14 mm
- 15
- 15.875
- 16
- 16 mm
- 16 mm
- 17
- 18
- 18 mm
- 19.05
- 19.1
- 20
- 20 mm
- 22
- 22 mm
- 22.2
- 25
- 25 mm
- 25.4
- 28
- 30
- 30 mm
- 31.7
- 31.75
- 32
- 34.925
- 35
- 35 mm
- 38.1
- 40
- 40 mm
- 44.4
- 44.45
- 45
- 45 mm
- 50
- 50 mm
- 50.8
- 55
- 57.15
- 60
- 60 mm
- 63
- 63.5
- 65
- 69.8
- 69.85
- 70
- 75
- 76.2
- 80
- 82.55
- 85
- 88.9
- 90
- 95
- 100
- 101.6
- 110
- 114.3
- 115
- 120
- 125
- 130
- 140
- 150
- 160
- 180
- 200
- 220
- 240
- 260
- 280
- 300
-
Connecting Thread Shape
-
Connecting Thread Direction
-
Ball Material
-
Liner Material
-
Allowable Incline Angle α(deg)
-
Lubrication Method
Brand
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy