Days to Ship |
|
---|
Hinges - Heavy Load, Stainless Steel
MISUMI
With up to 1000N allowable load (when two hinges are used). Made of Stainless Steel.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
MISUMI
Stainless steel hinges having the springs built in to close itself when released from a human hand.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Hinges - Stainless Steel, Offset Holes
MISUMI
General purpose and stainless steel hinges.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
MISUMI
General purpose and stainless steel hinges.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Hinges - Stainless Steel, Countersunk Thru Holes, GN237 Series
JW WINCO
GN 237 hinges are characterized by their compact and stable design. The various material and surface choices in combination with two mounting types enable very specific applications.
GN 237.3 stainless steel heavy duty hinges are designed for use under tough conditions and are distinguished by a compact design. The hinge pins are integral and allow the hinges to be used in environments with strong vibrations and shocks.
Configure Now
Ships as soon as | 5 Days |
---|
TOK Bearing
[Features]
· Infinite angle damper of maximum torque 0.8N/m.
· Bidirectional type can also be made.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Adjustable Friction Hinges - GN437 Series
JW WINCO
The set screw in GN 437 adjustable friction hinges allow the mobility of the hinge to be changed, and also generates a constant braking torque adjustable across the entire rotating range. The rotation of doors and flaps is inhibited, preventing inadvertent movement.
The friction torque is accomplished by interlocking two slim friction cones. The large friction surface and the hard-wearing plastic of the friction cones guarantee a long service life with virtually constant stiffness. This can be re-adjusted, if necessary, with the set screw.
Owing to the structure and the pre-stress of the friction cones, the hinge has virtually no radial play and no play at all in the axial direction.
Friction cone is temperature resistant to 80° C (176° F)
Configure Now
Ships as soon as | 5 Days |
---|
MISUMI
Aluminum Hinges capable of adjusting torque by hexagon socket screw
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Hinges - Detachable, Heavy Load
MISUMI
With up to 650N allowable load (when two hinges are used). Machined with counterbored holes and made of stainless steel.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Lift -Off Hinges - Stainless Steel, With Countersunk Thru Holes, GN337 Series
JW WINCO
GN 337 stainless hinges are a variation on GN 237 hinges, which are designed so the two sides of the hinge can be easily detached from one another.
Available with fixed bearing pin on the right or on the left.
Configure Now
Ships as soon as | 5 Days |
---|
Multiple-Joint Hinges - Stainless Steel, Internal Mounting with Opening Angle 180°, GN7237 Series
JW WINCO
GN 7237 stainless steel multiple-joint hinges are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 180°, which provides optimal accessibility and avoids the blocking of escape routes by open doors, for example.
Use of this hinge type leaves housing exteriors free of attachments that do not match the design or that should be avoided entirely in the interests of fast and easy cleaning.
Configure Now
Ships as soon as | 5 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
MISUMI
Standard Aluminum Hinges selectable from Clear Anodize or Black Anodize.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
MISUMI
1. Stepped Stainless Steel Hinges effeictive for panel mounting with 2~5mm thickness.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Hinges - Zinc Die-Cast or Aluminum, Countersunk Thru Holes or Threaded Stud Type, GN237 Series
JW WINCO
GN 237 hinges are characterized by their compact and stable design. The various material and surface choices in combination with two mounting types enable very specific applications.
Configure Now
Ships as soon as | 5 Days |
---|
Hinges - Detachable, Stainless Steel
MISUMI
Economical Detachable Hinges for general purposes. -Stainless Steel-
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
MISUMI
Nylon Hinges - White or Black Selectable
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Stainless Steel 4-Shaft Hinge, Inside Door, B-1404
Takigen
For complete product overview and details on Stainless Steel 4-Shaft Hinge, Inside Door, B-1404 see the sections below:
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
FHD-A1 Series Hinge Damper [Unidirectional]
Fuji Latex
As this damper is in the shape of a hinge, it is easy to install and corresponds to both opening direction and closing direction. In addition, it can not be used for vertical use.
Configure Now
Ships as soon as | 4 Days |
---|
MISUMI
This hinge has the reverse torque-driven mechanism to lighten up load applied by door-opening and -closing.
Configure Now
Ships as soon as | 5 Days |
---|
Hinges for Welding - Heavy Load
MISUMI
Hinges with 3mm or more plate thickness and for heavy load. Weld-On Detachable Type or Weld-On Stainless Steel Type is available.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
MISUMI
This hinge has the reverse torque-driven mechanism to lighten up load applied by door-opening and -closing.
Configure Now
Ships as soon as | 4 Days |
---|
Takigen
For complete product overview and details on Extruded, Flat, Hinge B-206 see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Hinges with built-in safety switch - SUPER-technopolymer, CFSW. Type
ELESA
This hinge can be subject to frequent cleaning cycles and can be used in any situation or environment where a special attention to cleaning and hygiene is requested, thanks to the IP67 protection class and the use of stainless steel elements for closing the hinge body.
Limited size, different assembly and output options (cable/connector) make this product easy to install on the most common aluminium profiles (30 mm minimum wide).
Easy to assemble: the built-in safety multiple switch and the hinge come in one piece offering a very easy and fast assembly. This is a big advantage in comparison with some traditional systems which require to set up separately a hinge and a safety switch connected by a special pin to replace the standard pin of the hinge.
Universal usage: CFSW. hinges can be assembled on the most common aluminium profiles.
By using a redundant system, the CFSW hinges allow to have a system design up to SIL3 in compliance with IEC 62061, PLe in compliance with EN ISO 13849-1 or security category 4 in compliance with EN 954-1 with redundant structure.
Configure Now
Ships as soon as | 4 Days |
---|
Stainless Steel Heavy Duty Hinges【2-4 Pieces Per Package】
Trusco Nakayama
For complete product overview and details on Stainless Steel Heavy Duty Hinges see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Steel Super Heavy Duty Weld-on Flag Hinge【2-4 Pieces Per Package】
Trusco Nakayama
For complete product overview and details on Steel Super Heavy Duty Weld-on Flag Hinge see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Hinges - Detachable with Steps
MISUMI
Stainless Steel Detachable Hinges effective when mounting panels with 3mm/5mm thickness.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Hinges -SUPER-technopolymer, CFM. Type
ELESA
Max 270° (-90° and +180° being 0° the condition where the two interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.
Configure Now
Ships as soon as | 4 Days |
---|
Hinge for thin doors -Technopolymer, CFB. Type
ELESA
Max 200° (-10° and +190° being 0° the condition where the two interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.
Configure Now
Ships as soon as | 4 Days |
---|
MISUMI
Compact and stainless steel Detachable Hinges with tight appearance
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
FRN-P2 Series, Rotary Damper [One-Way]
Fuji Latex
This damper is a unidirectional rotary damper with adjustable torque. Also, the gears attached to the damper are available in 2 types.
[Features]
· The torque of the rotary damper changes according to the rotation speed.
· Generally, the torque increases as the rotation speed increases, and decreases as the rotation speed decreases.
· Regarding the torque value of the catalog, 20rpm is the torque value at the time of rotation.
· In addition, the torque at startup is slightly different from the rated torque.
· The torque of the rotary damper varies according to the operating environment temperature.
· In general, the torque decreases as the temperature rises, and rises as the temperature decreases.
· This is because the viscosity of the oil inside the damper is affected by the temperature change, hence when the temperature returns to normal, the torque also returns to its original value
Configure Now
Ships as soon as | 4 Days |
---|
Takigen
For complete product overview and details on Interlocking Hinge B-16 see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Hinges - Plastic, Countersunk Thru hole, EN237.1 Series
JW WINCO
EN 237.1 Hinges Plastic, Countersunk Thru Hole, Socket Head Thru Hole.
Plastic is temperature resistant up to 140° C (285° F).
Configure Now
Ships as soon as | 5 Days |
---|
TOK Bearing
[Features]
· Smallest diameter damper by the manufacturer (about 2/3 of conventional products).
· Slim and ultra-compact shape with outer diameter ø 11 [mm] (manufacturer's smallest diameter damper), housing length 22 [mm], maximum torque 0.29N/m (3kgf/ cm) achieved.
Configure Now
Ships as soon as | 4 Days |
---|
Hinges for Welding - Stainless Steel
MISUMI
Dedicated for weld-mounting without holes. Made of stainless steel.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Hinges - Stainless Steel Stepped
MISUMI
Stepped Stainless Steel Hinges effective for 5mm panel mounting.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Hinges -Technopolymer, CFA. Type
ELESA
Max 215° (-35° and +180° being 0° the condition where the two interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.
Configure Now
Ships as soon as | 4 Days |
---|
Spring hinges - for automatic return SUPER-technopolymer, CFMR. Type
ELESA
Max 270° (-90° and +180° being 0° the condition where the two interconnected surfaces are on the same plane).
The hinge can reach -90 ° but this condition must not be used for CFMR-NO execution.
Do not exceed the rotation limit angle so as not to prejudice the correct operation of the return spring.
Configure Now
Ships as soon as | 4 Days |
---|
Hinges with screw-covers -Technopolymer, CFQ. Type
ELESA
Max 195° (-15° and +180° being 0° the condition where the interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.
Configure Now
Ships as soon as | 4 Days |
---|
Flat Type Hinge with Bushing B-78-B
Takigen
For complete product overview and details on Flat Type Hinge with Bushing B-78-B see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Shirokuma
For complete product overview and details on Long Hinge, BF-3 see the sections below:
Configure Now
Ships as soon as | 5 Days |
---|
Hinges - Aluminium, CMM-AL Type
ELESA
Max 270° (-90° and +180° being 0° the condition where the two interconnected surfaces are on the same plane).
Do not exceed the rotation angle limit so as not to prejudice the hinge mechanical performance.
Configure Now
Ships as soon as | 4 Days |
---|
FFD-25FS/FW/SS/SW Series Friction Damper [One-Way]
Fuji Latex
This damper is small and space saving, and is a unidirectional resin friction type damper that can be installed easily. In addition, no oil is used in this damper.
Configure Now
Ships as soon as | 4 Days |
---|
Slip-Joint Bushing Hinge B-267-2
Takigen
For complete product overview and details on Slip-Joint Bushing Hinge B-267-2 see the sections below:
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Takigen
For complete product overview and details on Hinge B-217 see the sections below:
Configure Now
Ships as soon as | 4 Days |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Main Body Type |
Flat Hinge Type |
Length L(mm) |
Operating Environment |
Main Body Material |
Main Body Surface Treatment |
Width W(mm) |
Additional Function |
Reversed |
Mounting Method |
Mounting Screw Hole Type |
|
|
| |||||||||||||||||||||||||||||||||||||||||||
Brand | MISUMI | MISUMI | MISUMI | MISUMI | JW WINCO | TOK Bearing | JW WINCO | MISUMI | MISUMI | JW WINCO | JW WINCO | RICH ENGINEERIN | MISUMI | MISUMI | JW WINCO | MISUMI | MISUMI | Takigen | Fuji Latex | MISUMI | MISUMI | MISUMI | Takigen | ELESA | Trusco Nakayama | Trusco Nakayama | MISUMI | ELESA | ELESA | MISUMI | Fuji Latex | Takigen | JW WINCO | TOK Bearing | MISUMI | MISUMI | ELESA | ELESA | ELESA | Takigen | Shirokuma | ELESA | Fuji Latex | Takigen | Takigen |
Product Series | Hinges - Stainless Steel, Countersunk Thru Holes, GN237 Series | Lift -Off Hinges - Stainless Steel, With Countersunk Thru Holes, GN337 Series | Multiple-Joint Hinges - Stainless Steel, Internal Mounting with Opening Angle 180°, GN7237 Series | Hinges - Zinc Die-Cast or Aluminum, Countersunk Thru Holes or Threaded Stud Type, GN237 Series | Hinges with built-in safety switch - SUPER-technopolymer, CFSW. Type | Steel Super Heavy Duty Weld-on Flag Hinge【2-4 Pieces Per Package】 | Spring hinges - for automatic return SUPER-technopolymer, CFMR. Type | ||||||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
Days to Ship |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included | 5 Days |
Same Day Stock Items Included | 5 Days |
Same Day Stock Items Included |
Same Day
Stock Items Included | 5 Days | 5 Days | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 5 Days |
Same Day
Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included | 4 Days | 5 Days |
Same Day Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
Same Day Stock Items Included | 4 Days | 4 Days |
Same Day Stock Items Included | 4 Days | 4 Days | 5 Days | 4 Days |
Same Day Stock Items Included |
Same Day
Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days | 4 Days | 4 Days |
Same Day Stock Items Included | 4 Days |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||
Main Body Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Flat Hinges | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Flat Hinge Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Length L(mm) | 50 ~ 125 | 20 ~ 51 | 25 ~ 100 | 25 ~ 100 | 30 ~ 60 | - | 40 ~ 60 | - | 50 ~ 100 | 40 ~ 60 | 105.2 ~ 179.5 | 25.5 ~ 102 | 66 ~ 113 | - | 30 ~ 60 | 40 ~ 75 | - | - | - | - | 50 ~ 150 | - | 50 ~ 150 | 110 | - | - | - | 30 ~ 60 | 109 | 35 ~ 80 | - | - | 30 ~ 60 | - | 40 ~ 100 | 41 ~ 48 | 39.5 ~ 96.5 | 67 | 50 | - | - | 40 ~ 60 | - | 75 | - |
Operating Environment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Main Body Material | Stainless Steel / Zinc Alloy | - | - | - | Stainless Steel | - | Zinc Alloy | - | - | Stainless Steel | Stainless Steel | Stainless Steel / Zinc Alloy / Resin | - | - | Aluminum / Zinc Alloy | - | - | - | - | - | - | - | - | 00146 | - | - | - | 00146 | 00146 | - | - | - | Cold rolled steel plate | - | - | - | 00146 | 00146 | 00146 | - | - | Aluminum | - | - | - |
Main Body Surface Treatment | Buffed / Chrome Plating | - | - | - | Satellite Chrome Plating | - | Black paint / Velour Chrome Plating | Black Alumite Treatment / White alumite treatment | - | Satellite Chrome Plating | Barrel Polishing | N/A / Buffed / Chrome Plating | Black Alumite Treatment / White alumite treatment | - | Black chrome plating / Black paint / Velour Chrome Plating | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Satellite Chrome Plating | - | - | - | - | - | - | - | - | - | - | - | - |
Width W(mm) | 50 ~ 125 | 14 ~ 38 | 20 ~ 60 | - | 30 ~ 60 | - | 40 ~ 60 | - | - | 40 ~ 60 | 70.1 ~ 116.5 | 25 ~ 80 | 36 ~ 80 | - | 30 ~ 120 | 30 ~ 38 | 47 ~ 80 | - | - | - | 50 ~ 120 | - | 50 | 60 | - | - | - | 30 ~ 76 | 45 | 8 ~ 14.5 | - | - | 30 ~ 60 | - | 30 ~ 60 | 36 ~ 48 | 38.5 ~ 97.5 | 55 | 45 | - | - | - | - | 70 | - |
Additional Function | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Reversed | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | For Right Side / For Left Side | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Mounting Method | - | - | - | - | Screw | - | Screw | - | - | Screw | Other | - | - | - | Screw / Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Screw | - | - | - | - | - | - | - | - | - | - | - | - |
Mounting Screw Hole Type | Countersinks / Counterbored | - | - | - | - | - | - | - | - | - | - | Round Bore / Countersinks / Female Thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy