MISUMI
Caps for protecting frame end faces.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
MISUMI
Caps for protecting frame end faces.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
MISUMI
Caps for protecting frame end faces.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
MISUMI
Caps for protecting frame end faces.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Frame End Caps - 6 Series, Screw Affixed
MISUMI
Extrusion End Caps Screw Mounting Type. Alteration is not required.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Configure Now
Ships as soon as | 5 Days |
---|
Frame End Caps - 5 Series, Screw Affixed
MISUMI
Extrusion End Caps Screw Mounting Type. Alteration is not required.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Frame End Caps - 8 Series, Screw Affixed
MISUMI
Extrusion End Caps Screw Mounting Type. Alteration is not required.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Configure Now
Ships as soon as | 5 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 5 Days |
---|
Frame End Caps - 8-45 Series, Screw Affixed
MISUMI
Extrusion End Caps Screw Mounting Type. Tapping on the extrusion is not required.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Frame End Caps - 8-45 Series, High Rigidity
MISUMI
Extrusion End Cap dedicated for High Rigidity Aluminum Extrusions. In order to use this, the cross-section of the mating extrusion must be alteration-machined.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Frame End Caps - 8 Series, Corner Bracket
MISUMI
Extrusion End Caps mounted on corners. Extrusion alteration is not required.
Configure Now
Ships as soon as | 4 Days |
---|
Frame End Caps - 5 Series, Corner Bracket
MISUMI
Extrusion End Caps mounted on corners.
Configure Now
Ships as soon as | 4 Days |
---|
Frame End Caps - 8 Series, High Rigidity
MISUMI
Extrusion End Cap dedicated for High Rigidity Aluminum Extrusion GFS8. In order to use this, the mating extrusion must be alteration-machined.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
YUKIGIKEN
[Applications]
· A small cap dedicated for 25L frames.
· It protects the cut surface of the frame and prevents injury.
[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.
Configure Now
Ships as soon as | 4 Days |
---|
YUKIGIKEN
[Applications]
· A small cap dedicated for 40 x 80 mm cross-section frame.
· It protects the cut surface of the frame and prevents injury.
[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.
Configure Now
Ships as soon as | 4 Days |
---|
YUKIGIKEN
A small cap dedicated for 205 frames.
Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.
Configure Now
Ships as soon as | 6 Days |
---|
Frame End Caps - 5 Series, L-Shaped
MISUMI
End Plates for HFSR5-404020 extrusions. Extrusion alteration is required.
Configure Now
Ships as soon as | 4 Days |
---|
Frame End Caps - 6 Series, Corner Bracket
MISUMI
Extrusion End Caps mounted on corners.
Configure Now
Ships as soon as | 4 Days |
---|
Frame End Caps - 6 Series, High Rigidity
MISUMI
Extrusion End Cap dedicated for High Rigidity Aluminum Extrusion GFS6-3030. In order to use this, the mating extrusion must be alteration-machined.
Configure Now
Ships as soon as | 4 Days |
---|
YUKIGIKEN
[Applications]
· A small cap dedicated for 23M frames.
· It protects the cut surface of the frame and prevents injury.
[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.
Configure Now
Ships as soon as | 4 Days |
---|
YUKIGIKEN
[Applications]
· A small cap for 20 x 40 mm cross-section frame.
· It protects the cut surface of the frame and prevents injury.
[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.
Configure Now
Ships as soon as | 4 Days |
---|
YUKIGIKEN
[Applications]
· A small cap dedicated for 255 frames.
· It protects the cut surface of the frame and prevents injury.
[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.
Configure Now
Ships as soon as | 6 Days |
---|
Assembly kit for profiles - SUPER- technopolymer, PMW. - CFSW. and CFMW Type
ELESA
PMW assembly plate allows the mounting of CFSW.110 and CFMW.110 hinges on standard profiles of 30, 35, 40, 45 and 50 mm with T-slot.
The mounting on profiles of 40 mm can also be performed without the use of assembly plate.
The fixing screws of the plate to the profile are not accessible after the assembly of the hinges. Therefore, even with the use of PMW assembly plate, CFSW. and CFMW. hinges remain tamperproof.
The supply of the plate includes:
2 countersunk screws M6x14 (for CFMW.110).
2 M6 hexagonal nuts, assembled into the plate, necessary for the fixing of the hinge to the plate.
Instructions of use
Fit CFSW.110 or CFMW.110 hinge on the relative plate by using M6 countersunk head screws (included in the supply).
Place the closing caps properly (included in the supply of the hinge).
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 6 Days |
---|
Frame End Caps - 6 Series, L-Shaped
MISUMI
End Plates for HFSR6-606030 extrusions. Extrusion alteration is required.
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
YUKIGIKEN
[Applications]
· A small cap dedicated for 30 x 40 mm cross-section frame.
· It protects the cut surface of the frame and prevents injury.
[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.
Configure Now
Ships as soon as | 4 Days |
---|
YUKIGIKEN
[Applications]
· A small cap dedicated for 40 x 40 mm cross-section frame.
· It protects the cut surface of the frame and prevents injury.
[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.
Configure Now
Ships as soon as | 4 Days |
---|
YUKIGIKEN
[Applications]
· A small cap dedicated for 66S frames.
· It protects the cut surface of the frame and prevents injury.
[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.
Configure Now
Ships as soon as | 6 Days |
---|
YUKIGIKEN
[Applications]
· A small cap dedicated for 40 x 60 mm cross-section frame.
· It protects the cut surface of the frame and prevents injury.
[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.
Configure Now
Ships as soon as | 4 Days |
---|
YUKIGIKEN
[Applications]
· A small safety end cap for protecting the end surface of the frame.
· M10 end face tapping and M12, 16 end face tapping are also supported and casters/adjusters can be installed.
· Can also be used with commercially-available square pipes and rods.
Configure Now
Ships as soon as | 4 Days |
---|
YUKIGIKEN
[Applications]
· A small cap dedicated for 153 frames.
· It protects the cut surface of the frame and prevents injury.
[Note]
· Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.
Configure Now
Ships as soon as | 4 Days |
---|
YUKIGIKEN
A small cap dedicated for 20C frames.
Note that the corners of the frame cut surface are very sharp. Be sure to install the end cap where the cut surface is exposed.
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 6 Days |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Cap Type |
Mounting Method |
Extrusion Size |
Extrusion Series |
Material |
|
| ||||||||||||||||||||||||||||||||||||
Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NABESEI | MISUMI | MISUMI | NABESEI | Yamato International | NABESEI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | YUKIGIKEN | YUKIGIKEN | YUKIGIKEN | MISUMI | MISUMI | MISUMI | YUKIGIKEN | YUKIGIKEN | YUKIGIKEN | ELESA | YUKIGIKEN | MISUMI | YUKIGIKEN | YUKIGIKEN | YUKIGIKEN | YUKIGIKEN | YUKIGIKEN | YUKIGIKEN | YUKIGIKEN | YUKIGIKEN | YUKIGIKEN |
Product Series | Assembly kit for profiles - SUPER- technopolymer, PMW. - CFSW. and CFMW Type | ||||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
Days to Ship |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 5 Days |
Same Day Stock Items Included |
Same Day
Stock Items Included | 5 Days | 4 Days | 5 Days |
Same Day
Stock Items Included |
Same Day Stock Items Included | 4 Days | 4 Days |
Same Day Stock Items Included | 4 Days | 4 Days | 6 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 6 Days | 4 Days | 6 Days | 4 Days | 4 Days | 4 Days | 4 Days | 6 Days | 4 Days | 4 Days | 4 Days | 4 Days | 6 Days |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||
Cap Type | - | - | - | - | - | Square Shape | - | - | Square Shape | Square Shape | Square Shape | - | - | - | - | - | Square Shape | Rectangle Shape | Rectangle Shape | - | - | - | Rectangle Shape | Rectangle Shape | Rectangle Shape | - | L Shape | - | - | Rectangle Shape | Square Shape | Square Shape | Rectangle Shape | - | Rectangle Shape | Square Shape | Square Shape |
Mounting Method | - | - | - | - | - | Cap Mount | - | - | Cap Mount | Cap Mount | Cap Mount | - | - | - | - | - | Screw Mount | Screw Mount | Screw Mount | - | - | - | Screw Mount | Cap Mount | Screw Mount | - | Screw Mount | - | Cap Mount | Screw Mount | Screw Mount | Screw Mount | Screw Mount | - | Cap Mount | Screw Mount | Screw Mount |
Extrusion Size | - | - | - | - | - | 40X40 | - | - | 20X20 | YF2020-4 ~ YF6060-6 | 30X30 | - | - | - | - | - | F25L | F48L, F48M | E205 | - | - | - | F23M | F24K, F24M, F24H | F255 | - | 60 × 60 | - | - | F43K/F34K/F34E/F43W | □ All 40 Types | F66S | F46F, F46L, F46M | - | F153 | EP20 | E44R |
Extrusion Series | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | LECOFRAME 25 Series (For Light/Medium Structures) | LECOFRAME 40 Series (For Medium/Heavy Structures) | LECOFRAME 25 Series (For Light/Medium Structures) | - | - | - | LECOFRAME 40 Series (For Medium/Heavy Structures) | LECOFRAME 40 Series (For Medium/Heavy Structures) | LECOFRAME 25 Series (For Light/Medium Structures) | - | LECOFRAME 40 Series (For Medium/Heavy Structures) | - | LECOFRAME 40 Series (For Medium/Heavy Structures) | LECOFRAME 40 Series (For Medium/Heavy Structures) | LECOFRAME 40 Series (For Medium/Heavy Structures) | LECOFRAME 40 Series (For Medium/Heavy Structures) | LECOFRAME 40 Series (For Medium/Heavy Structures) | LECOFRAME 40 Series (For Medium/Heavy Structures) | LECOFRAME 25 Series (For Light/Medium Structures) | LECOFRAME 25 Series (For Light/Medium Structures) | LECOFRAME 40 Series (For Medium/Heavy Structures) |
Material | - | - | - | - | - | Plastic | - | - | Plastic | Plastic | Plastic | - | - | - | - | - | Plastic | Plastic | Plastic | - | - | - | Plastic | Plastic | Plastic | 00021 | Plastic | - | Plastic | Plastic | Plastic | Plastic | Plastic | Plastic | Plastic | Plastic | Plastic |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy