MenuClose
Indexing Plungers
Filter by Type 1
-
Indexing Plungers - Tip Shape Selectable
MISUMI
Alteration of tip shapes makes it possible to use the product separately depending on the current application demand.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Indexing Plungers - Fine Thread, Return Type
MISUMI
• Type: Standard Knob
• Overall Length: Standard
• Mounting Method: Screw-In
• Locking Mechanism: Without Locking Nose
• Operation Knob: Provided- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Indexing Plungers - Compact, Return Type
MISUMI
As Compact As Possible. 2/3 of Conventional Products.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Indexing Plungers - Long-Return
MISUMI
• Type: Standard Knob
• Overall Length: Standard
• Mounting Method: Screw-In
• Locking Mechanism: Without Locking Nose
• Operation Knob: Provided- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Spring Bolts - Stainless Steel, Plunger Pin Retracted in Normal Position, GN 313 Series
JW WINCO
The plunger pin of the GN 313 spring bolts does not protrude in the inoperative position. It can be operated manually, or in the case of Type D and DK, mechanically (pneumatic cylinder, cam plate, etc.), where it will protrude only as long as it is in operation. An application example for the identification no. 2 would be using the internal thread on the pressure side, for operation of special pressure bolts or a rod arrangement.GN 613.1 installation tools, available as accessory, reduce the installation time and make it easier to counter hold the plunger during the assembly. The tool is inserted laterally between the knob and the threaded body and engages in the slot provided.
Configure Now
Ships as soon as 23 Days -
NBK
[Features]
· An indexing plunger with an integrated mounting flange.
· Suitable for mounting equipment and devices on walls etc.
·Pull out the knob and rotate 90° to lock with the pin in a retracted state.
·To unlock, pull the knob out slightly and rotate it 90°.
· Returns to its original position via the action of the integrated spring.
· For mounting, please use commercially available hex socket bolts, etc.
· Using slotted holes allows you to adjust the position after mounting.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Indexing Plungers - Precision Pilot, Return Type, Fine Thread
MISUMI
• Type: Standard Knob
• Overall Length: Standard
• Mounting Method: Screw-In
• Locking Mechanism: Without Locking Nose
• Operation Knob: Provided- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Indexing Plungers - Fine Thread, Lever Nuts
MISUMI
• Type: Lever Type
• Overall Length: Standard
• Mounting Method: Screw-In
• Locking Mechanism: Lever Type
• Operation Knob: Provided- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
JW WINCO
GN 617 Indexing Plungers Steel, Non Lock-Out. GN 617 indexing plungers are standard units for a wide range of indexing mechanisms. Threaded steel body with black oxide finish, plunger pin is hardened steel. Glass fiber reinforced plastic, temperature resistant up to 230° F (110° C), non-removable. Type G or GK with threaded plunger end are for applications where a special knob to customer's request or own design is required, or for such cases where the spindle is linked directly to an operating mechanism. Indexing, spring and ball plungers and their accessories are also referred to as: spring loaded devices, detent pins, hand retractable pins, spring loaded pins, button handle pins, shackle pins, locating pins, indexing pins, retracting pins, spring loaded pins, receptacles and lanyards, rapid release pins, t-handle release pins, ball chains, self-locking rapid release pins, side thrust pins, thrust pins, spring loaded shells, ball buttons, spring loaded positioning elements, hand retractable spring plungers, lock-out spring plungers, non lock-out plungers, and spacer bushings.
Configure Now
Ships as soon as 5 Days -
Indexing Plungers - Switch Lever, Fine Thread
MISUMI
The ON/OFF state can be visually recognized by the indication on the lever.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
JW WINCO
GN 817 Indexing Plungers with Multiple Pin Lengths Steel, Lock-Out or Non Lock-Out. GN 817 indexing plungers offer the following advantages; two retracting strokes l1 per plunger diameter, when plunger is retracted the mechanism is partly shrouded, and features a defined thread length by an undercut at the end of the thread. Used in applications where the plunger must not protrude continually. To achieve this, the knob is rotated by 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position due to error or vibration. This indexing plunger has the unique feature of the pull knob partially enclosing the top of the plunger body, allowing less debris to enter into the mechanism. Indexing, spring and ball plungers and their accessories are also referred to as: spring loaded devices, detent pins, hand retractable pins, spring loaded pins, button handle pins, shackle pins, locating pins, indexing pins, retracting pins, spring loaded pins, receptacles and lanyards, rapid release pins, t-handle release pins, ball chains, self-locking rapid release pins, side thrust pins, thrust pins, spring loaded shells, ball buttons, spring loaded positioning elements, hand retractable spring plungers, lock-out spring plungers, non lock-out plungers, and spacer bushings.
Configure Now
Ships as soon as 5 Days -
HALDER
[Features]
· For index holes.
· External dimensions do not change, regardless of whether or not holding mechanisms are present.
· The roots of screw parts are loosened, so they can be screwed in fully.
· Operating temperature range is from -30 to +80°C.
· Use the distance collar (EH22120) to adjust the depth of the screw-in.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 12 Days -
Indexing Plungers - Aluminum Knob, Rest Position
MISUMI
• Type: Standard Knob
• Overall Length: Short
• Mounting Method: Screw-In
• Operation Knob: Provided
• Body Surface Treatment: Black Oxide- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Indexing Plungers - Knobless, Compact
MISUMI
The most suitable knob for each purpose can be mounted.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Indexing Plungers - Coarse Thread, Lever
MISUMI
• Type: Lever Type
• Overall Length: Standard
• Mounting Method: Screw-In
• Locking Mechanism: Lever Type
• Operation Knob: Provided- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
JW WINCO
LRHS Hand Retractable Spring Plungers Stainless Steel, With L Handle, Lock-Out Type. These hand retractable plungers have a rest position where the plunger can stay in the retracted position. Plunger body and pin are both Stainless steel type 303, and are available with or without a nylon sealing patch. Indexing, spring and ball plungers and their accessories are also referred to as: spring loaded devices, detent pins, hand retractable pins, spring loaded pins, button handle pins, shackle pins, locating pins, indexing pins, retracting pins, spring loaded pins, receptacles and lanyards, rapid release pins, t-handle release pins, ball chains, self-locking rapid release pins, side thrust pins, thrust pins, spring loaded shells, ball buttons, spring loaded positioning elements, hand retractable spring plungers, lock-out spring plungers, non lock-out plungers, and spacer bushings.
Configure Now
Ships as soon as 5 Days -
HALDER
To be used for positioning and applying pressure, e.g. during painting and sandblasting.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 12 Days -
JW WINCO
With GN 722.3 square cam action spring latches, the latch pin is withdrawn over the cam of the body by rotating the lever arm 180°. If the latch pin may need to be retracted periodically, the notch allows for safe positioning while the latch pin is held in the retracted position. The ZB and SW versions are designed for applications in steel construction, whereas the A4 stainless steel version is suitable for use in particularly aggressive environments. The dimensional tolerances between latch pin and body are selected so that the functional reliability is guaranteed even with rough applications or in case of contamination. For fastening, slotted or hexagonal mounting holes allow the use of DIN 912 socket cap screws and hexagon screws or nuts according to DIN 931 or DIN 934.
Configure Now
Ships as soon as 7 Days -
MISUMI
• Type: No Knob
• Overall Length: Standard
• Mounting Method: Screw-In
• Locking Mechanism: Without Locking Nose
• Body Material: 12L13 Carbon Steel- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Indexing Plungers - Plate Mount
MISUMI
• Type: Standard Knob
• Body O.D./Thread Dimension M (mm): 6
• Nose O.D. d Dimension (Ø): 6
• Length L (mm): 48
• Stroke Dimension S (mm): 6- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Indexing Plungers - Resin Knob
MISUMI
• Type: Standard Knob
• Overall Length: Short
• Mounting Method: Screw-In
• Locking Mechanism: Without Locking Nose
• Operation Knob: Provided- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
JW WINCO
GN 612 Cam Action Indexing Plungers Stainless Steel, Lock-Out. GN 612 cam action indexing plungers are best utilized when the pin needs to be retracted. A groove exists so the plunger can be held in both positions. The plastic ribbed sleeve offers an aesthetically pleasing and comfortable finger grip. Indexing, spring and ball plungers and their accessories are also referred to as: spring loaded devices, detent pins, hand retractable pins, spring loaded pins, button handle pins, shackle pins, locating pins, indexing pins, retracting pins, spring loaded pins, receptacles and lanyards, rapid release pins, t-handle release pins, ball chains, self-locking rapid release pins, side thrust pins, thrust pins, spring loaded shells, ball buttons, spring loaded positioning elements, hand retractable spring plungers, lock-out spring plungers, non lock-out plungers, and spacer bushings.
Configure Now
Ships as soon as 5 Days -
JW WINCO
SPRP Stubby Hand Retractable Spring Plungers Steel, With Pull Ring, Non Lock-Out. Ideal for applications with limited space. Plunger Body is 12L14 steel with a zinc plated finish, plunger pin made of case hardened steel with zinc plated finish and pull ring spring steel, zinc plated finish. Indexing, spring and ball plungers and their accessories are also referred to as: spring loaded devices, detent pins, hand retractable pins, spring loaded pins, button handle pins, shackle pins, locating pins, indexing pins, retracting pins, spring loaded pins, receptacles and lanyards, rapid release pins, t-handle release pins, ball chains, self-locking rapid release pins, side thrust pins, thrust pins, spring loaded shells, ball buttons, spring loaded positioning elements, hand retractable spring plungers, lock-out spring plungers, non lock-out plungers, and spacer bushings.
Configure Now
Ships as soon as 5 Days -
Indexing Plungers - Stainless Steel, Non Lock-Out/Lock-Out, GN 717 Series
JW WINCO
GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores. During assembly, the maximum tightening torques shown in the table should not be exceeded when securing the lock nut.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Indexing Plungers - Tapped Tip
MISUMI
The attachment can be mounted on the tip.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 7 Days -
NBK
[Features]
- Stainless steel.
- Superior corrosion resistance.
- Turn the lever to control the pin insertion.
- Retractable into the body with a 180° turn of the lever.
- Lever can be locked with a notch machined in the main body.
- Ergonomic lever cap attached to the PXVS-B/BK.
- Nickel plating for good abrasion resistance.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
JW WINCO
GN 822.7 Mini indexing plungers Stainless Steel with Plastic or Stainless Steel Knob, Lock-out and Non Lock-out Types, with Hidden Lock Mechanism. GN 822.7 mini indexing plungers feature small, compact dimensions. This model combines their ingenious design with a complete series of all current sizes of bolts and threads. Type BN is non lock-out type. Type CN offers a lock-out position for applications that require the plunger pin to be retracted for an extended period of time. The button can be turned by 30° after retracting the indexing pin, holding it in the “retracted” position using the indexing lock. In the rest position, the lock-out mechanism is completely concealed by the knob. Indexing, spring and ball plungers and their accessories are also referred to as: spring loaded devices, detent pins, hand retractable pins, spring loaded pins, button handle pins, shackle pins, locating pins, indexing pins, retracting pins, spring loaded pins, receptacles and lanyards, rapid release pins, t-handle release pins, ball chains, self-locking rapid release pins, side thrust pins, thrust pins, spring loaded shells, ball buttons, spring loaded positioning elements, hand retractable spring plungers, lock-out spring plungers, non lock-out plungers, and spacer bushings.
Configure Now
Ships as soon as 5 Days -
MISUMI
• Type: Special Knob
• Overall Length: Standard
• Mounting Method: Screw-In
• Operation Knob: Provided
• Body Material: 1045 Carbon Steel- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Nabeya
Rotating the operation knob 90° enables fixation with the pin retracted.
[Features]
· Pulling and rotating the operation knob 90° enables locking with the pin retracted.
· To unlock, pull the operation knob a little and rotate it by 90°.
· Returns to its original position via internal spring action- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Index Bolt With Hexagon Collar And Locking
HALDER
[Features]
· For index holes.
· Use the distance collar (EH22120) to adjust the depth of the screw-in.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 12 Days -
JW WINCO
GN 822.1 Mini Indexing Plungers Steel, Lock-Out and Non Lock-Out, with Open Lock Mechanism. GN 822.1 indexing plungers feature small, compact dimensions. They are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench. Type B is non lock-out type. Type C offers a lock-out position for applications that require the plunger pin to be retracted for an extended period of time. Indexing, spring and ball plungers and their accessories are also referred to as: spring loaded devices, detent pins, hand retractable pins, spring loaded pins, button handle pins, shackle pins, locating pins, indexing pins, retracting pins, spring loaded pins, receptacles and lanyards, rapid release pins, t-handle release pins, ball chains, self-locking rapid release pins, side thrust pins, thrust pins, spring loaded shells, ball buttons, spring loaded positioning elements, hand retractable spring plungers, lock-out spring plungers, non lock-out plungers, and spacer bushings.
Configure Now
Ships as soon as 5 Days -
IMAO
Made entirely of stainless steel, this product is ideal for areas demanding rust-proofing as well as clean environments. Two types of noses are available: hardened and non-hardened.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
JW WINCO
GN 822.8 Mini Indexing plungers Steel, Plate Mount, Lock-Out and Non Lock-Out. GN 822.8 mini indexing plungers feature small, compact dimensions. They are mounted by countersunk screws. Indexing, spring and ball plungers and their accessories are also referred to as: spring loaded devices, detent pins, hand retractable pins, spring loaded pins, button handle pins, shackle pins, locating pins, indexing pins, retracting pins, spring loaded pins, receptacles and lanyards, rapid release pins, t-handle release pins, ball chains, self-locking rapid release pins, side thrust pins, thrust pins, spring loaded shells, ball buttons, spring loaded positioning elements, hand retractable spring plungers, lock-out spring plungers, non lock-out plungers, and spacer bushings.
Configure Now
Ships as soon as 5 Days -
Indexing Plungers - Stainless Steel, Non Lock-Out, with Pull Ring / Wire Loop, GN 717 Series
JW WINCO
GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores. During assembly, the maximum tightening torques shown in the table should not be exceeded when securing the lock nut.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
MISUMI
The flanges enable the plunger to be adjusted to right or left.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 7 Days -
Precision Index Plungers With Tapered Pin
HALDER
[Features]
· This precision index bolt can be used in combination with bushings for speedy positioning and fixing in place.
· Both parts are accurately finished, ensuring high repetition accuracy.
· For specifications with hold mechanisms, pull the knob and rotate it 90 degrees.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 12 Days -
JW WINCO
With GN 722.2 square cam action spring latches, the latch pin is withdrawn over the cam of the body by rotating the lever arm 180°. If the latch pin may need to be retracted periodically, the notch allows for safe positioning while the latch pin is held in the retracted position. The ZB and SW versions are designed for applications in steel construction, whereas the A4 stainless steel version is suitable for use in particularly aggressive environments. The dimensional tolerances between latch pin and body are selected so that the functional reliability is guaranteed even with rough applications or in case of contamination. There are several options for fastening. The hexagonal mounting holes allow the use of DIN 912 socket cap screws and hexagon screws or nuts according to DIN 931 or DIN 934.
Configure Now
Ships as soon as 7 Days -
Indexing Plungers - Stainless Steel, Non Lock-Out/Lock-Out, with L-Handle, GN 7017 Series
JW WINCO
GN 7017 indexing plungers are activated through a L-handle and are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of the mating indexing bores. Lock-out types C / CK are used for applications where the plunger pin needs to stay in its retracted position. During assembly, the maximum tightening torques shown in the table should not be exceeded when securing the lock nut.
Configure Now
Ships as soon as 23 Days -
MISUMI
• Type: No Knob
• Overall Length: Standard
• Mounting Method: Press Fit
• Locking Mechanism: Without Locking Nose
• Nose Material: 440C Stainless Steel- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
NBK
Indexing or positioning pin. Good abrasion resistance.
[Features]
- Indexing or positioning pin.
- New standards for [PXXS-S] and [PXXS-SK] with stainless steel knobs.
- Pin is hardened (steel) or nickel-plated (stainless steel). Excels in abrasion resistance.
- If the threaded part is too long for the mounting surface, use the [PXC] indexing plunger collar instead.
- Use a locking service for fixing indexing plungers.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
NBK
The pin can be locked in its retracted position by pulling and rotating the knob 90 degrees. To unlock, pull the knob slightly and rotate it by 90 degrees. The built-in spring returns the pin to its origin.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
NBK
Two types of standardized stroke for each pin diameter. Pull the knob and rotate 90° to lock with the pin retracted. To unlock, pull the knob slightly and rotate 90°. Returns to its original position via internal spring action.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
HALDER
The positioning clamping pin allows fast clamping, fastening, adjusting, changing and securing of workpieces, plates, fixture systems etc.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 12 Days -
Indexing plungers - SUPER - technopolymer body, PMT.100 Type
ELESA
The SUPER-technopolymer threaded body of the plunger offers a low friction factor to the plunger stroke; no lubricating maintenance is required.
Anticorrosive material: suitable even in the presence of liquid or humidity (PMT.100-SST).
Resistant to several cleaning cycles with solvents and other chemical agents, for this reason they are suitable for applications as in the pharmaceutical or food industry.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
JW WINCO
GN 607.1 Short Indexing Plungers Steel, Lock-Out. GN 607.1 indexing plungers with lock-out position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position. Indexing, spring and ball plungers and their accessories are also referred to as: spring loaded devices, detent pins, hand retractable pins, buspring loaded pins, bspring loaded pins, button handle pins, shackle pins, locating pins, indexing pins, retracting pins, spring loaded pins, receptacles and lanyards, rapid release pins, t-handle release pins, ball chains, self-locking rapid release pins, side thrust pins, thrust pins, spring loaded shells, ball buttons, spring loaded positioning elements, hand retractable spring plungers, lock-out spring plungers, non lock-out plungers, and spacer bushings.
Configure Now
Ships as soon as 5 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Type 1 |
| Type |
| Locking Mechanism |
| Mounting Method 1 |
| Mounting Method |
| Overall Length |
| Body Material |
| All Stainless |
| Nose Material |
| Body Outer Diameter/Thread M(mm) |
| Stroke S(mm) |
| Nose Surface Treatment |
| Nose Heat Treatment |
| Nose Outer Diameter d(Ø) |
| Length L(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | JW WINCO | NBK | MISUMI | MISUMI | JW WINCO | MISUMI | JW WINCO | HALDER | MISUMI | MISUMI | MISUMI | JW WINCO | HALDER | JW WINCO | MISUMI | MISUMI | MISUMI | JW WINCO | JW WINCO | JW WINCO | MISUMI | NBK | JW WINCO | MISUMI | Nabeya | HALDER | JW WINCO | IMAO | JW WINCO | JW WINCO | MISUMI | HALDER | JW WINCO | JW WINCO | MISUMI | NBK | NBK | NBK | HALDER | ELESA | JW WINCO |
| Product Series | Spring Bolts - Stainless Steel, Plunger Pin Retracted in Normal Position, GN 313 Series | Indexing Plungers - Precision Pilot, Return Type, Fine Thread | Indexing Plungers - Stainless Steel, Non Lock-Out/Lock-Out, GN 717 Series | Indexing Plungers - Stainless Steel, Non Lock-Out, with Pull Ring / Wire Loop, GN 717 Series | Indexing Plungers - Stainless Steel, Non Lock-Out/Lock-Out, with L-Handle, GN 7017 Series | Indexing plungers - SUPER - technopolymer body, PMT.100 Type | |||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||
| Days to Ship |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included | 23 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 5 Days |
Same Day Stock Items Included | 5 Days | 12 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included | 5 Days | 12 Days | 7 Days |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included | 5 Days | 5 Days | 5 Days | 7 Days | 4 Days | 5 Days |
Same Day Stock Items Included | 4 Days | 12 Days | 5 Days | 4 Days | 5 Days | 5 Days | 7 Days | 12 Days | 7 Days | 23 Days |
Same Day Stock Items Included | 4 Days | 4 Days | 4 Days | 12 Days | 4 Days | 5 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||
| Type 1 | Standard Knob | Standard Knob | Standard Knob | Standard Knob | Standard Knob / No Knob | Standard Knob | Standard Knob | Lever Type | Standard Knob / No Knob | Lever Type | Standard Knob / No Knob | Standard Knob | Standard Knob | No Knob | Lever Type | Lever Type | Special Knob | Lever Type | No Knob | Standard Knob | Standard Knob | Lever Type | With Ring | With Ring | Standard Knob | Lever Type | Standard Knob | Special Knob | Standard Knob | Standard Knob / No Knob | Standard Knob | Standard Knob | Standard Knob | With Ring | Standard Knob | Special Knob | Lever Type | Lever Type | No Knob | Standard Knob / No Knob | Standard Knob | Standard Knob | - | - | Standard Knob |
| Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Standard Knob | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Locking Mechanism | Without Locking Nose | Without Locking Nose | Without Locking Nose | Without Locking Nose | Without Locking Nose | With Locking Nose | Without Locking Nose | With Locking Nose | Without Locking Nose | With Locking Nose | With Locking Nose / Without Locking Nose | - | With Locking Nose / Without Locking Nose | Without Locking Nose | With Locking Nose | With Locking Nose | - | With Locking Nose | Without Locking Nose | With Locking Nose | Without Locking Nose | With Locking Nose | Without Locking Nose | With Locking Nose / Without Locking Nose | Without Locking Nose | With Locking Nose | With Locking Nose / Without Locking Nose | - | With Locking Nose | - | With Locking Nose / Without Locking Nose | None | With Locking Nose / Without Locking Nose | Without Locking Nose | Without Locking Nose | - | With Locking Nose | With Locking Nose / Without Locking Nose | Without Locking Nose | None | With Locking Nose | With Locking Nose | - | - | With Locking Nose |
| Mounting Method 1 | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Flange | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In / Bolt Mounting | Screw-In | Screw-In | Screw-In | Screw-In | Press Fit | Flange | Screw-In | Flange | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Flange | Screw-In | Flange | Others | Flange | Screw-In | Press Fit | Screw-In | Screw-In | Screw-In | - | - | Screw-In |
| Mounting Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Flange | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length | Standard | Standard | Short | Standard | Standard | Short | Standard | Standard | - | Standard | - | Short | Short | Standard | Standard | - | - | Standard | Standard | Short | Short | - | - | Standard | Standard | Standard | - | Standard | Standard | - | - | Standard | - | Standard | Standard / Short | - | Standard | Standard | Standard | Standard | Standard | Standard | - | - | - |
| Body Material | Steel | Steel | Steel | Steel | Stainless Steel | Zinc Die Cast | Steel | Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Steel | Steel | Stainless Steel | - | Stainless Steel | Steel | Steel | Steel | Steel / Stainless Steel | Steel | Stainless Steel | Steel | - | Stainless Steel | Steel | Steel / Stainless Steel | - | Steel / Stainless Steel | Stainless Steel | Zinc Die Cast | Stainless Steel | Steel | - | Stainless Steel | Stainless Steel | - | - | - | - | - | 00037 / Stainless Steel | Steel / Stainless Steel |
| All Stainless | - | - | - | - | Applicable / Not Compliant | Not Compliant | - | - | - | - | - | - | - | - | - | - | - | Applicable | - | - | - | - | - | Not Compliant | - | Applicable / Not Compliant | - | - | Not Compliant | - | - | Applicable | - | Applicable | - | - | Applicable | Applicable | - | Applicable / Not Compliant | Applicable / Not Compliant | Not Compliant | - | - | - |
| Nose Material | Steel / Stainless Steel | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel | Stainless Steel | - | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | - | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Stainless Steel | - | Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel / Stainless Steel | Steel | Stainless Steel | Steel / Stainless Steel | - | Stainless Steel | Steel | Steel / Stainless Steel | - | Steel / Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel | - | Stainless Steel | Stainless Steel | Stainless Steel | - | - | - | - | - | Steel / Stainless Steel |
| Body Outer Diameter/Thread M(mm) | 5 ～ 16 | 6 ～ 16 | 8 ～ 10 | 8 ～ 16 | 10 ～ 20 | 6 ～ 12 | 10 ～ 20 | 16 ～ 20 | 10 ～ 20 | 12 ～ 20 | 8 ～ 20 | - | 12 ～ 16 | 8 ～ 16 | 10 ～ 12 | - | - | - | 10 ～ 16 | 6 | 12 ～ 16 | 12 ～ 20 | - | 6 ～ 16 | 10 ～ 16 | 12 ～ 20 | 8 ～ 16 | 10 ～ 16 | 10 ～ 16 | - | 8 ～ 10 | 8 ～ 20 | - | 6 ～ 16 | 8 ～ 16 | - | - | 6 ～ 16 | - | 10 ～ 20 | 10 ～ 20 | 8 ～ 20 | - | M10 ～ M20 | 12 ～ 16 |
| Stroke S(mm) | 4 ～ 12 | 4 ～ 8 | 5 ～ 6 | 4 ～ 12 | 6 ～ 11 | 4 ～ 8 | 5 ～ 10 | 10 ～ 12 | 5 ～ 10 | 6 ～ 10 | 4 ～ 15 | - | 6 ～ 7 | 4 ～ 12 | 5 ～ 6 | - | - | 14 ～ 20 | 5 ～ 8 | 6 | 6 ～ 8 | 8 ～ 12 | - | 3.5 ～ 10 | 5 ～ 12 | 8 ～ 12 | 5 ～ 10 | 5 ～ 8 | 5 ～ 8 | - | 5 ～ 7 | 4 ～ 10 | 5 ～ 20 | 3.5 ～ 10 | 4 ～ 12 | - | 14 ～ 20 | 9.5 ～ 25 | 4 ～ 12 | 5 ～ 10 | 5 ～ 10 | 4 ～ 15 | - | 5 ～ 10 | 6 ～ 8 |
| Nose Surface Treatment | None / Black Oxide | None / Black Oxide / Nickel Plating | None | None / Black Oxide | Electroless Nickel | None | Black Oxide | Black Oxide / Nickel Plating | - | Black Oxide | - | - | Black Oxide | None / Black Oxide | Black Oxide / Electroless Nickel | - | - | None | Black Oxide / Nickel Plating | Black Oxide | Black Oxide | - | - | None | None / Black Oxide | Nickel Plating | - | Black Oxide / Electroless Nickel | Black Oxide / Electroless Nickel | - | - | None | - | None | Black Oxide | - | None | None | None | None / Nickel Plating | None / Nickel Plating | None / Nickel Plating | - | - | - |
| Nose Heat Treatment | Hardened | None / Hardened | None | Hardened | None | None | Hardened | None / Hardened | - | Hardened | - | - | Hardened / Carburized | Hardened | Hardened | - | - | None | None / Hardened | Hardened | Hardened | - | - | None | Hardened | None | - | Hardened | None / Carburized | - | - | Hardened | - | None | Hardened | - | None | None | Hardened | None / Hardened | None / Hardened | None / Hardened | - | - | - |
| Nose Outer Diameter d(Ø) | 2 ～ 8 | 4 ～ 8 | 5 ～ 6 | 4 ～ 8 | 5 ～ 10 | 4 ～ 8 | 5 ～ 10 | 6 ～ 12 | 5 ～ 10 | 6 ～ 10 | 4 ～ 12 | 4 ～ 10 | 6 ～ 8 | 4 ～ 8 | 5 ～ 6 | - | 8 ～ 22 | 8 ～ 20 | 5 ～ 8 | 6 | 6 ～ 8 | 5 ～ 12 | - | 3 ～ 16 | 5 ～ 8 | 5 ～ 12 | 4 ～ 10 | 5 ～ 8 | 5 ～ 8 | 4 ～ 12 | 4 ～ 7 | 4 ～ 10 | 4 ～ 10 | 3 ～ 10 | 4 ～ 8 | 7.1 ～ 25 | 8 ～ 20 | 4 ～ 10 | 4 ～ 8 | 5 ～ 10 | 5 ～ 10 | 4 ～ 12 | 16 ～ 30 | 5 ～ 10 | 6 ～ 8 |
| Length L(mm) | 35 ～ 80.5 | 30.5 ～ 75.5 | 25 ～ 31 | 46 ～ 85 | 29 ～ 78 | 33 ～ 63.5 | 38 ～ 70 | 47 ～ 59 | 45 ～ 80 | 74 ～ 123 | 35 ～ 71.5 | - | 48 ～ 56 | 30 ～ 54 | 34 ～ 39 | - | - | 54 ～ 83 | 33 ～ 54 | 48 | 45 ～ 54 | 47 ～ 69 | - | 33.5 ～ 74.8 | 45 ～ 80.5 | 47 ～ 71 | 27.5 ～ 47.5 | 47.5 ～ 68 | 49 ～ 73 | - | 26.5 ～ 34 | 43 ～ 83 | 20.5 ～ 35 | 33.5 ～ 74.8 | 40 ～ 80.5 | - | 54 ～ 83 | 32 ～ 77.5 | 32 ～ 57 | 33 ～ 80 | 51 ～ 91 | 39 ～ 82 | - | - | 45 ～ 54 |
Loading...
Configure
Filters
-
Type
-
Locking Mechanism
-
Mounting Method 1
-
Mounting Method
-
Overall Length
-
Body Material
- Steel
- Stainless Steel
- Zinc Die Cast
- Others
-
All Stainless
-
Nose Material
-
Metric / Inch
-
Body Outer Diameter/Thread M(mm)
-
Stroke S(mm)
-
Nose Surface Treatment
-
Nose Heat Treatment
-
Nose Outer Diameter d(Ø)
-
Length L(mm)
Brand
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same Day
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 9 Days or Less
- 10 Days or Less
- 12 Days or Less
- 17 Days or Less
- 20 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy