Days to Ship |
|
---|
Hold Down Clamps - Small Spring Clamps
MISUMI
Clamps a workpiece from above by spring force.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Hold Down Clamps - Large Spring Clamp
MISUMI
Clamps a workpiece from above by spring force.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
HALDER
The down-thrust clamp is a universal mechanical clamp that allows fast and easy exchange and clamping of workpieces - as the clamping head can be easily manually swivelled to clear the workpiece.The down-thrust clamps provide the following advantages:
- compact footprint- clamping force of up to max. 30 kN via a clamping screw WS 36- clamping head swivels 360°- clamping stroke 30 mm- clamping height max. 250 mm- integrated clamping height stop for safe use- fixture via 4 cap screws M 24, quality 8.8 (tightening torque 600 Nm) with a hole spacing of 100 x 100 mmConfigure Now
Ships as soon as | 12 Days |
---|
HALDER
Used as clamps in conventional fixtures. A reamed hole is provided in the body of the fixture. The hole depth has to be adapted to the desired clamping height. To provide a counter force, a support can be placed against the rounded end of the clamp (radius 22). This support can be flat, half-rounded or V-shaped. Clamping is achieved by means of a DIN 933 hexagon screw.
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
Trapezoidal self-locking thread, spindle with final safety device. The holders, which can be secured by means of the T-slots, make it possible to tighten the jacks so that they will not slip out of position when a workpiece is changed. They also allow to fit screw jacks to vertical clamping surfaces. Screw jacks are frequently used for supporting workpieces. Use of the self-aligning cap ensures a correctly aligned bearing surface. Using the centering plate as an intermediate element, it is possible to fit a number of screw jacks sizes 52, 70 and 100 together one above the other.
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
The bedding support is used to support additional clamping points on components.The benefits of the bedding support are:- provides additional support without distortion- helps to eliminate tool vibration- compact, low construction- supports ribs, beads and shackles to reinforce clamped components- distortion-free support of raw parts- easy handling - clamping outside of workpiece is also possible by means of adjustable clamping levers.
Configure Now
Ships as soon as | 12 Days |
---|
Hold Down Clamps - Absorbing Pusher Pins
MISUMI
Mounted on the ends of cylinders to clamp objects gently.
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
The compact clamps are all purpose clamping elements. Due to the self-locking clamping lever application can either take place in horizontal or vertical position in both, machined and raw workpieces.Features:- exact and position precise clamping- ease of operation- high clamping force at low tightening torques, abrasion-resistant due to clamping lever with bearings- continuous, large clamping area- clamping lever entirely retractable for hindrance-free exchange of workpieces- threaded clamping lever can be used with many clamping elements, e.g. ball-ended thrust screws (EH 22700. - EH 22720.), self-aligning pads (EH 22730./EH 22740.) etc.- large adjusting range at constant clamping force- continuous height adjustment by height adapters 23690.0112/.0116- easy and flexible set up- corrosion-resistant- resistent to dirt and chips
Configure Now
Ships as soon as | 12 Days |
---|
Configure Now
Ships as soon as | 12 Days |
---|
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
The brass plate protects the workpiece from damage. The combination of nut DIN 6330 B (EH 23070.)/conical seat DIN 6319 G (EH 23050.) on the clamping bolt and thrust pad DIN 6311 (EH 22560. removable) on the adjusting screw compensates for the lack of parallelity. The clamp can be used either way (soft or hard clamping surface).
Configure Now
Ships as soon as | 12 Days |
---|
Toothed clamping elements - SUPER-technopolymer, RDB Type
ELESA
The toothed clamping elements RDB-F and RDB-B, coupled between them or with the executions RDB-CF or RDB-CB, allow to lock the position of two components rotating around an axis.
The locking angle is adjustable with a pitch of 6 °.
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 12 Days |
---|
Support Extensions, for straight clamps, slotted, with adj. counter piece
HALDER
The support extension is screwed on the counter piece of the clamp EH 23185. for an extension of the clamping height (dimension h2). The clamping height can be adjusted stepless by means of the support extension.
Configure Now
Ships as soon as | 12 Days |
---|
Supporting Elements, For clamps
HALDER
• Type: Peripheral Components
• Type: Main Body
• Material: Aluminum Alloy
• Dimension H3 (mm): 5
• Spring: Stainless steel
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
The support element is used to support additional clamping points on components.The benefits of the support element are:- provides additional support without distortion- helps to eliminate tool vibration- supports ribs, beads and shackles to reinforce clamped components- distortion-free support of raw parts
Configure Now
Ships as soon as | 12 Days |
---|
Floating Clamps, combined clamping and locking M 16
HALDER
The floating clamp is used to clamp and support additional clamping points on components.The benefits of the floating clamp are:- especially suitable for large workpieces- avoids vibration during the processing- clamps ribs, beads and shackles to reinforce clamped components- distortion-free clamping of raw parts
Configure Now
Ships as soon as | 12 Days |
---|
Configure Now
Ships as soon as | 12 Days |
---|
Clamps, slotted, with adj. counter piece
HALDER
The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
• Type: Vertical Hold-Down Type
• Type: Main Body
• Material: Stainless Steel
• Arm Height Type: Standard
• Body: Steelened
Configure Now
Ships as soon as | 12 Days |
---|
Clamps, slotted, with adj. counter piece, with T-Bolt
HALDER
The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.
Configure Now
Ships as soon as | 12 Days |
---|
Floating Clamps, separate clamping and locking M 12
HALDER
Floating clamps with seperate clamp and locking are used to clamp and support additional clamping points on extremly pliable workpieces. Both, clamping and supporting force can individually be designed.The benefits of the floating clamp are:- avoids vibration during the processing- clamps ribs, beads and shackles to reinforce clamped components- distortion-free clamping of raw parts.
Configure Now
Ships as soon as | 12 Days |
---|
Clamping Jaws, for floating clamp M 12
HALDER
The clamping jaws can be used for floating clamps 23320.0012 and 23320.0014 to increase the clamping range.
Configure Now
Ships as soon as | 12 Days |
---|
Clamping Jaws, for floating clamp M 16
HALDER
The clamping jaws can be used for the floating clamp 23320.0016 to increase or decrease the clamping range.
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
• Type: Vertical Hold-Down Type
• Type: Main Body
• Material: Steel 1.0503 (S45C equivalent)
• Conflict Mineral Free: yes
• Reach Compliant: yes
Configure Now
Ships as soon as | 12 Days |
---|
Intermediate Elements, with support
HALDER
• Type: Peripheral Components
• Type: Main Body
• Material: Stainless Steel
• Body: Steelened
• Wearing Part: Heat-treated steel
Configure Now
Ships as soon as | 12 Days |
---|
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
Thanks to the closed slot, the clamp is suitable for an application with rotating workpieces.
Configure Now
Ships as soon as | 12 Days |
---|
Clamps, slotted, with adj. counter piece, with stud
HALDER
The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.
Configure Now
Ships as soon as | 12 Days |
---|
Clamps, slotted, with adj. counter piece, with stud with internal hexagon
HALDER
The thrust pad and the counter element are connected with the clamp and therefore secured against loss. Consequently, the clamp is quickly ready for use. The clamp is equipped with two flat noses and can be turned around depending on the case of application.
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
For increasing the clamping height of down-thrust clamps EH 23310.
Configure Now
Ships as soon as | 12 Days |
---|
Height Adapters, for Compact Clamp
HALDER
The height adapters for compact clamps allow for a clamping height increase and have the following characteristics:- continuous covering of clamping height- height adapter allows an exact positioning of compact clamp at designated slot distances- height can optionally be expanded
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
• Type: Vertical Hold-Down Type
• Type: Main Body
• Material: Steel 1.0503 (S45C equivalent)
• Conflict Mineral Free: yes
• Reach Compliant: yes
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
• Type: Peripheral Components
• Type: Main Body
• Material: Stainless Steel
• Body: Steelened
• Wearing Part: Heat-treated steel
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
• Type: Peripheral Components
• Type: Main Body
• Material: Stainless Steel
• Body: Steelened
• Wearing Part: Heat-treated steel
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
• Type: Peripheral Components
• Type: Main Body
• Material: Stainless Steel
• Body: Steelened
• Wearing Part: Heat-treated steel
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
• Type: Peripheral Components
• Type: Main Body
• Material: Stainless Steel
• Dimension a (mm): 12
• Dimension b (mm): 30
Configure Now
Ships as soon as | 12 Days |
---|
Base Elements, for location hole
HALDER
• Type: Peripheral Components
• Type: Main Body
• Material: Stainless Steel
• Body: Steelened
• Wearing Part: Heat-treated steel
Configure Now
Ships as soon as | 12 Days |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Applicable Clamp Force (Range)(N) |
Material |
Main Unit/Accessories |
Type |
Arm Height Type |
Arm Length Type |
Brand | MISUMI | MISUMI | HALDER | HALDER | HALDER | HALDER | MISUMI | HALDER | HALDER | HALDER | HALDER | HALDER | ELESA | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Support Extensions, for straight clamps, slotted, with adj. counter piece | Clamps, slotted, with adj. counter piece, with stud with internal hexagon | |||||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Days to Ship |
Same Day Stock Items Included |
Same Day Stock Items Included | 12 Days | 12 Days | 12 Days | 12 Days | 4 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 4 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days |
Specifications |
|
|
| ||||||||||||||||||||||||||||||||||||
Applicable Clamp Force (Range)(N) | Up to 100 | Up to 100 | - | - | - | - | Up to 100 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Material | Steel | Steel | Stainless Steel | Stainless Steel | 24 ~ Stainless Steel | Stainless Steel | Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | - | Stainless Steel | Stainless Steel | Aluminum Alloy | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
Main Unit/Accessories | Main Body | Main Body | Main Body | Main Body | Main Body / Optional Parts | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | - | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body |
Type | - | - | Vertical Hold-Down Type | Vertical Hold-Down Type | Peripheral Components / Vertical Hold-Down Type | Side Push-Pull Type 360° Mountable | - | Vertical Hold-Down Type | Vertical Hold-Down Type | Vertical Hold-Down Type | Vertical Hold-Down Type | Vertical Hold-Down Type | - | Vertical Hold-Down Type | Peripheral Components | Peripheral Components | Hold Down, Horizontal Handle | Side Push-Pull Type 360° Mountable | Vertical Hold-Down Type | Vertical Hold-Down Type | Vertical Hold-Down Type | Vertical Hold-Down Type | Side Push-Pull Type 360° Mountable | Peripheral Components | Peripheral Components | Vertical Hold-Down Type | Peripheral Components | Vertical Hold-Down Type | Vertical Hold-Down Type | Vertical Hold-Down Type | Vertical Hold-Down Type | Peripheral Components | Peripheral Components | Vertical Hold-Down Type | Peripheral Components | Peripheral Components | Peripheral Components | Peripheral Components | Peripheral Components |
Arm Height Type | - | - | - | - | - | - | - | - | Standard | - | - | - | - | - | - | - | - | Standard | - | - | Standard | - | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Arm Length Type | - | - | - | - | - | - | - | Standard | - | Standard | Standard | - | - | Standard | - | - | - | - | Standard | Standard | - | Standard | - | - | - | - | - | Standard | Standard | Standard | Standard | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy