Days to Ship |
|
---|
MISUMI
Clamps a workpiece from the side by spring force.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Nose Attachments for Guide Plungers
MISUMI
Please attach this to the tip of the spring side clamp for use.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Clamping Vices, Moveable and Fixed Jaw
HALDER
The clamping vice is a solid, compact clamping module with a horizontally acting clamping force and a robust mechanical spindle.- clamping force up to max. 80 kN- clamping stroke 25 mm via screw drive WS 36- fixture via 4 cap screws M 24, quality 8.8 (tightening torque 600 Nm) with a hole spacing 100 x 100 mm- suitable clamping jaws 23231.0020 - .0033 are available
Configure Now
Ships as soon as | 12 Days |
---|
Lateral Spring Plungers, with spring steel sheet
HALDER
To be used for positioning and applying pressure.
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
Suitable for a simultaneous "positioning" and "clamping" of workpieces. The locating element is a precision element which can be assembled from either side. The clamping and locating part adapted to the workpiece is screwed to the cylindrical support. Clamping and locating parts are manufactured by the user according to the individual requirements.
Configure Now
Ships as soon as | 12 Days |
---|
Push Plungers, with pin, protected against rotating
HALDER
The push plunger is suitable for easy and safe positioning of workpieces or components prior to clamping or assembly.Locating pins of your own profile or design can be attached to our threaded pin types.
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
• Type: Side Push
• Nominal Dimension (mm): 100
• Plunger: Heat-treated steel, induction hardened
• Conflict Mineral Free: yes
• Reach Compliant: yes
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
Inserting the socket head screw moves the two clamping chucks outwards and presses the workpieces against a stop. Using the double taper, an additional vertical clamping force will be achieved. Stroke of taper clamping units with M 5 = ±0,5, M 8 = ±0,5, M 12 = ±1 and M 16 = ±1,5. Can be mounted in a threaded hole or with T-nuts for horizontal or vertical multiple clamping.
Configure Now
Ships as soon as | 12 Days |
---|
Interchangeable Jaws, for vices, with pull-down effect
HALDER
The interchangeable jaws - held by 2 permanent magnets - can be inserted and exchanged with a manual handle.
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
Due to the big clamping jaw, this clamping element is suitable for lateral clamping of high workpieces.The clamping force acts forwards and downwards. Clamping plate is turnable, i.e. to the ground or ribbed side.
Configure Now
Ships as soon as | 12 Days |
---|
Double Edge Clamps, machinable chucks
HALDER
Inserting the socket head screw moves the two clamping chucks outwards and presses the workpiece against a stop.The chucks can be machined to the needed workpiece contour. The locking plate is needed only for this machining, not for the workpiece clamping.
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
The sub-part clamp and the sub-part stop enable workpieces to be clamped on the front face. This allows the full area of the machine table to be used to clamp the workpiece.- down-hold effect through an angled jaw face- clamping of large workpieces on the whole of the machine table- large clamping forces of up to 20 kN- solid version made of vibration-eliminating ductile iron- optimal adaption to the workpiece and material through the use of clamping inserts and interchangeable jaws- force closure is possible with a fixed slot tenon EH 23110. in a T-slot- minimum interference of clamping areas - even for large workpieces- location holes at the sides for fastening of longitudinal stops if required
Configure Now
Ships as soon as | 12 Days |
---|
HALDER
Inserting the socket head screw moves the two clamping chucks outwards and presses the workpiece against a stop.
Configure Now
Ships as soon as | 12 Days |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Material |
Main Body/Optional Parts |
Type |
Stroke S(mm) |
Attaching Portion Shape |
Arm Height Type |
Arm Length Type |
Brand | MISUMI | MISUMI | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER | HALDER |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | |||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
Days to Ship |
Same Day Stock Items Included |
Same Day Stock Items Included | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days |
Specifications |
|
| |||||||||||
Material | Steel | MC Nylon | Steel | Steel | Steel | Steel | MC Nylon ~ Steel | MC Nylon | Steel | Steel | Aluminum Alloy | MC Nylon | Aluminum Alloy |
Main Body/Optional Parts | Main Body | Optional Parts | - | - | - | - | - | - | - | - | - | - | - |
Type | - | - | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push | Side Push |
Stroke S(mm) | - | - | - | 1.5 | - | 6 ~ 10 | - | - | - | - | - | - | - |
Attaching Portion Shape | - | - | - | Flange Base | Straight Base | Straight Base | - | Straight Base | - | Straight Base | Straight Base | - | Straight Base |
Arm Height Type | - | - | - | - | Standard | - | - | - | - | - | - | - | - |
Arm Length Type | - | - | - | - | Standard | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy