MenuClose
Spur Gears
| Days to Ship |
|
|---|
-
- New Products
Spur Gears - Pressure Angle 20 Degrees, Module 1.0
MISUMI
New: Width 8 mm for thin type and 12 mm for standard type are added. [July 2023]
•Material : 1045 Carbon Steel or Equivalent, 304 Stainless Steel, Stainless Steel, Steel
•Shape : Shape A, Shape B, Shape K
For complete product overview and details on Spur Gears - Pressure Angle 20Deg., Module 1.0 see the sections below:- Volume Discount is available
- Lead Time Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
- New Products
Spur Gears - Pressure Angle 20 Degrees, Module 2.0
MISUMI
New: Width 15 mm added. [July 2023]
•Material : 1045 Carbon Steel or Equivalent, 304 Stainless Steel, Stainless Steel, Steel
•Shape : Shape A, Shape B
For complete product overview and details on Spur Gears - Pressure Angle 20Deg., Module 2.0 see the sections below:- Lead Time Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
KHK Gears
•Material : Steel
•Shape : Shape B, Shape K
•Shaft Bore Config. : Keyway + Tap, Round hole, Round hole+tap
For complete product overview and details on Spur Gear SS see the sections below:- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Spur Gears - Pressure Angle 20 Degrees, Module 1.5
MISUMI
New: Width 10 mm added. [July 2023]
•Material : 1045 Carbon Steel or Equivalent, 304 Stainless Steel, Stainless Steel, Steel
•Shape : Shape A, Shape B, Shape K
For complete product overview and details on Spur Gears - Pressure Angle 20Deg., Module 1.5 see the sections below:- Lead Time Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
KHK Gears
•Material : Steel
•Shape : Shape A
•Shaft Bore Config. : Keyway, Round hole
For complete product overview and details on Spur Gear SSA see the sections below:- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Spur Gears - Pressure Angle 20 Degrees, Plastic
MISUMI
New: Max. teeth numbers are increased to 120 for module 0.5, 0.8, 1.0 and 1.5. And blue polyacetal type is added. [July 2023]
Plastic Type relatively quiet when engaged.- Lead Time Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Spur Gears - Pressure Angle 20 Degrees, Module 0.5
MISUMI
•Material : 1045 Carbon Steel or Equivalent, 304 Stainless Steel, Brass, Free-Cutting Brass Bar, Stainless Steel, Steel
•Shape : Shape A, Shape B, Shape K
For complete product overview and details on Spur Gears - Pressure Angle 20Deg., Module 0.5 see the sections below:- Lead Time Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Spur Gears - Pressure Angle 20 Degrees, Hub Dimension Configurable
MISUMI
If the mounting spaces are limited, the tooth width and hub dimensions can be reconfigured.
- Spec Change
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 7 Days -
- New Products
Spur Gears - Pressure Angle 20 Degrees, Module 0.8
MISUMI
New: Width 3 mm added. [July 2023]
•Material : 1045 Carbon Steel or Equivalent, 304 Stainless Steel, Brass, Free-Cutting Brass Bar, Stainless Steel, Steel
•Shape : Shape A, Shape B, Shape K
For complete product overview and details on Spur Gears - Pressure Angle 20Deg., Module 0.8 see the sections below:- Lead Time Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
KHK Gears
•Material : Steel
•Shape : Shape B
•Shaft Bore Config. : Keyway + Tap, Round hole, Round hole+tap
For complete product overview and details on Ground Spur Gear SSG see the sections below:- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Kyouiku Gear
•Material : Steel
•Shape : Shape A, Shape B, Shape K, With Shaft
•Shaft Bore Config. : Keyway, Keyway + Tap, Round hole, Round hole+tap
For complete product overview and details on Spur Gear m1 S45C Type see the sections below:- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Spur Gears - Pressure Angle 20 Degrees, Module 3.0
MISUMI
New: Width 25 mm added. [July 2023]
•Material : 1045 Carbon Steel or Equivalent, 304 Stainless Steel, Stainless Steel, Steel
•Shape : Shape A, Shape B
For complete product overview and details on Spur Gears - Pressure Angle 20Deg., Module 3.0 see the sections below:- Lead Time Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Stainless Steel Spur Gear Stainless Steel
KHK Gears
•Material : Stainless Steel
•Shape : Shape B, Shape K
•Shaft Bore Config. : Keyway + Tap, Round hole, Round hole+tap
For complete product overview and details on Stainless Steel Spur Gear SUS see the sections below:- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
KHK Gears
•Material : Resin
•Shape : Shape B
•Shaft Bore Config. : Keyway + Tap, Round hole, Round hole+tap
For complete product overview and details on Plastic Spur Gear PS see the sections below:- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Spur Gears - Pressure Angle 20 Degrees, with Built-In Bearing
MISUMI
Bearing built-in spur gears can be used for reversing rotations and synchronizing.
- Volume Discount is available
- Spec Change
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Spur Gears - Pressure Angle 20 Degrees, Module 2.5
MISUMI
New: Width 20 mm added. [July 2023]
•Material : 1045 Carbon Steel or Equivalent, 304 Stainless Steel, Stainless Steel, Steel
•Shape : Shape A, Shape B
For complete product overview and details on Spur Gears - Pressure Angle 20Deg., Module 2.5 see the sections below:- Lead Time Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Spur Gears - Pressure Angle 20 Degrees, Induction Hardened
MISUMI
Gears with hardened teeth which provides excellent strength, abrasion resistance and high precision
- Spec Change
- Price Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 7 Days -
Kyouiku Gear
•Material : Brass
•Shape : Shape B, Shape K
•Shaft Bore Config. : Round hole+tap
For complete product overview and details on Spur gear m 0.3 brass type see the sections below:- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
- New Products
Spur Gears - Pressure Angle 20 Degrees, B Shape, Shaft Bore Fixed
MISUMI
•Material : 1045 Carbon Steel or Equivalent, Steel
•Shape : Shape B
For complete product overview and details on Spur Gear - Pressure Angle 20°, Module 0.5, 0.8, 1.0, 1.5, 2.0, 2.5, 3.0, B Shape, Shaft Bore Fixed Type see the sections below:- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
K Standard Pinion Gear - Module 2, Full-Depth Tooth, Pressure Angle 20°
Katayama Chain
•Material : Steel
•Shape : Shape B
•Shaft Bore Config. : Round hole
For complete product overview and details on K Standard Pinion Gear (Module 2) Full-Depth Tooth, Pressure Angle 20° see the sections below:- Volume Discount is available
Configure Now
Ships as soon as Same Day Stock Items Included
-
Spur Gears - Pressure Angle 20 Degrees, Keyless
MISUMI
The strength of shafts is not deteriorated because machining to shafts (i.e. keyways, etc.) is not required. And positioning is easy.
- Spec Change
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 7 Days -
K Standard Pinion Gear - Module 6, Full-Depth Tooth, Pressure Angle 20°
Katayama Chain
•Material : Steel
•Shape : Shape B
•Shaft Bore Config. : Round hole
For complete product overview and details on K Standard Pinion Gear (Module 6) Full-Depth Tooth, Pressure Angle 20° see the sections below:Configure Now
Ships as soon as 4 Days -
Spur Gears - Pressure Angle 20 Degrees, Bonded Plastic
MISUMI
Plastic gears having the metal cores and MC nylon teeth fusion-bonded to each other.
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 7 Days -
Standard Spur Gear, Gear Module 5
SANKOSEISAKUSHO
Modules with commonly used numbers of teeth are available, from 12T up to 80T.
Configure Now
Ships as soon as 5 Days -
Standard Spur Gear, Gear Module 4
SANKOSEISAKUSHO
Modules with commonly used numbers of teeth are available, from 12T up to 80T.
- Volume Discount is available
Configure Now
Ships as soon as 5 Days -
Stainless Steel Spur Gear SUSA
KHK Gears
•Material : Stainless Steel
•Shape : Shape A
•Shaft Bore Config. : Keyway, Round hole
For complete product overview and details on Stainless Steel Spur Gear SUSA see the sections below:- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Spur Gear m1 POM Blue (Polyacetal) Type
Kyouiku Gear
Ideal for preventing contamination in food/packaging equipment, as the blue color of the POM stands out against food ingredients.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
K Standard Pinion Gear - Module 4, Full-Depth Tooth, Pressure Angle 20°
Katayama Chain
•Material : Steel
•Shape : Shape B
•Shaft Bore Config. : Round hole
For complete product overview and details on K Standard Pinion Gear (Module 4) Full-Depth Tooth, Pressure Angle 20° see the sections below:Configure Now
Ships as soon as 4 Days -
F Series Stainless Steel Spur Gear
KHK Gears
[Features]· No backlash between shaft and gear when engaged· Can be mounted in any position and meshing the teeth is easy· Installation and removal are simple and can be repeated for use· The bushing slides during overload to reduce damage to the gears.
- Volume Discount is available
Configure Now
Ships as soon as 7 Days -
KHK Gears
[Features]· No backlash between shaft and gear when engaged· Can be mounted in any position and meshing the teeth is easy· Installation and removal are simple and can be repeated for use· The bushing slides during overload to reduce damage to the gears.
- Volume Discount is available
Configure Now
Ships as soon as 7 Days -
Standard Spur Gear, Gear Module 1
SANKOSEISAKUSHO
Modules with commonly used numbers of teeth are available, from 12T up to 80T.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Kyouiku Gear
•Material : Steel
•Shape : Shape B, With Shaft
•Shaft Bore Config. : Round hole, Round hole+tap
For complete product overview and details on Polished Flat Gear, m1 see the sections below:- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
KHK Gears
•Material : Brass
•Shape : Shape B, Shape K
•Shaft Bore Config. : Keyway + Tap, Round hole, Round hole+tap
For complete product overview and details on Spur Gear BSS see the sections below:- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
KHK Gears
[Features]
· Ideal as a companion pinion to a KRG Ground Rack.
· Made of tempered SCM440 steel alloy with induction-hardened tooth surface.
· High-precision and high-strength spur gear with ground finish.
· JIS N6 grade, m1 to 3, number of teeth: 20 to 40.Configure Now
Ships as soon as 5 Days -
K Standard Pinion Gear - Module 1, Full-Depth Tooth, Pressure Angle 20°
Katayama Chain
•Material : Steel
•Shape : Shape B, Shape K
•Shaft Bore Config. : Round hole
For complete product overview and details on K Standard Pinion Gear (Module 1) Full-Depth Tooth, Pressure Angle 20° see the sections below:- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
K Standard Pinion Gear - Module 5, Full-Depth Tooth, Pressure Angle 20°
Katayama Chain
•Material : Steel
•Shape : Shape B
•Shaft Bore Config. : Round hole
For complete product overview and details on K Standard Pinion Gear (Module 5) Full-Depth Tooth, Pressure Angle 20° see the sections below:Configure Now
Ships as soon as 4 Days -
Aoki Seimitsu
•Material : Steel
•Shape : Shape B
•Shaft Bore Config. : Round hole
For complete product overview and details on Spur gear (with boss) SSB see the sections below:- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 6 Days -
KHK Gears
•Material : Steel
•Shape : Shape B
•Shaft Bore Config. : Keyway + Tap, Round hole, Round hole+tap
For complete product overview and details on CP Spur Gear see the sections below:- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
KHK Gears
A flat spur gear where the boss of the SSG gear grinding spur gear is cut to reduce weight.
Configure Now
Ships as soon as 4 Days -
KHK Gears
[Features]
· Ideal as a companion pinion for a KRF heat-treated rack.
· JIS N8 grade, m1.5 to 5, number of teeth: 20/25/30.
· Tempered spur gear which uses SCM440 steel alloy.Configure Now
Ships as soon as 5 Days -
KHK Gears
•Material : Resin
•Shape : Shape B
•Shaft Bore Config. : Keyway + Tap, Round hole, Round hole+tap
For complete product overview and details on Bonded Spur Gear NSU see the sections below:- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
KAMO SEIKO
[Features]
・ Backlash does not occur in the forward and reverse directions because the teeth (roller pins) are always in contact at 2 to 3 places
・ Its feeding accuracy (rotation straight line ratio) and positioning accuracy are close to those of precision ball screws
・ Rollers supported by bearings roll smoothly on the trochoid gear
· It does not produce a loud gear rattle or traveling noise. Therefore, there is less vibration
・ Due to smooth rolling contact and small diameter and low speed of the rotating part, low abrasion, and little heat generation and dust generationConfigure Now
Ships as soon as 8 Days -
K Standard Pinion Gear - Module 1.5, Full-Depth Tooth, Pressure Angle 20°
Katayama Chain
•Material : Steel
•Shape : Shape B, Shape K
•Shaft Bore Config. : Round hole
For complete product overview and details on K Standard Pinion Gear (Module 1.5) Full-Depth Tooth, Pressure Angle 20° see the sections below:- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
K Standard Pinion Gear - Module 2.5, Full-Depth Tooth, Pressure Angle 20°
Katayama Chain
•Material : Steel
•Shape : Shape B
•Shaft Bore Config. : Round hole
For complete product overview and details on K Standard Pinion Gear (Module 2.5) Full-Depth Tooth, Pressure Angle 20° see the sections below:- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
K Standard Pinion Gear - Module 3, Full-Depth Tooth, Pressure Angle 20°
Katayama Chain
•Material : Steel
•Shape : Shape B
•Shaft Bore Config. : Round hole
For complete product overview and details on K Standard Pinion Gear (Module 3) Full-Depth Tooth, Pressure Angle 20° see the sections below:- Volume Discount is available
Configure Now
Ships as soon as 4 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Number of Teeth |
| Material |
| Shape |
| Heat Treatment |
| Surface Treatment |
| Shaft Bore Configuration |
| Ground Tooth |
| Backlash |
| Shaft Bore Diameter d(Ø) |
| Bearing |
| Tooth Width B(mm) |
| Shaft Bore Tolerance |
| Module/Diametrical Pitch |
| Metal Bushing |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | KHK Gears | MISUMI | KHK Gears | MISUMI | MISUMI | MISUMI | MISUMI | KHK Gears | Kyouiku Gear | MISUMI | KHK Gears | KHK Gears | MISUMI | MISUMI | MISUMI | Kyouiku Gear | MISUMI | Katayama Chain | MISUMI | Katayama Chain | MISUMI | SANKOSEISAKUSHO | SANKOSEISAKUSHO | KHK Gears | Kyouiku Gear | Katayama Chain | KHK Gears | KHK Gears | SANKOSEISAKUSHO | Kyouiku Gear | KHK Gears | KHK Gears | Katayama Chain | Katayama Chain | Aoki Seimitsu | KHK Gears | KHK Gears | KHK Gears | KHK Gears | KAMO SEIKO | Katayama Chain | Katayama Chain | Katayama Chain |
| Product Series | Spur Gears - Pressure Angle 20 Degrees, Hub Dimension Configurable | Spur Gears - Pressure Angle 20 Degrees, with Built-In Bearing | Spur Gears - Pressure Angle 20 Degrees, B Shape, Shaft Bore Fixed | K Standard Pinion Gear - Module 2, Full-Depth Tooth, Pressure Angle 20° | K Standard Pinion Gear - Module 6, Full-Depth Tooth, Pressure Angle 20° | K Standard Pinion Gear - Module 4, Full-Depth Tooth, Pressure Angle 20° | K Standard Pinion Gear - Module 1, Full-Depth Tooth, Pressure Angle 20° | K Standard Pinion Gear - Module 5, Full-Depth Tooth, Pressure Angle 20° | K Standard Pinion Gear - Module 1.5, Full-Depth Tooth, Pressure Angle 20° | K Standard Pinion Gear - Module 2.5, Full-Depth Tooth, Pressure Angle 20° | K Standard Pinion Gear - Module 3, Full-Depth Tooth, Pressure Angle 20° | ||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||
| Days to Ship | 4 Days | 5 Days |
Same Day Stock Items Included | 5 Days |
Same Day Stock Items Included | 5 Days | 5 Days | 7 Days | 5 Days | 4 Days |
Same Day Stock Items Included | 5 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 5 Days | 7 Days | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 7 Days | 4 Days | 7 Days | 5 Days | 5 Days | 4 Days | 4 Days | 4 Days | 7 Days | 7 Days | 4 Days | 4 Days |
Same Day Stock Items Included | 5 Days | 4 Days | 4 Days | 6 Days | 4 Days | 4 Days | 5 Days | 4 Days | 8 Days | 4 Days | 4 Days | 4 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||
| Number of Teeth | 12 ～ 120 | 12 ～ 100 | 12 ～ 200 | 12 ～ 120 | 20 ～ 120 | 12 ～ 120 | 15 ～ 120 | 12 ～ 120 | 12 ～ 120 | 14 ～ 120 | 8 ～ 120 | 12 ～ 70 | 15 ～ 120 | 12 ～ 100 | 15 ～ 60 | 12 ～ 80 | 15 ～ 100 | 14 ～ 120 | 20 ～ 120 | 12 ～ 50 | 12 ～ 120 | 12 ～ 40 | 16 ～ 75 | 12 ～ 58 | 12 ～ 80 | 32 ～ 70 | 12 ～ 120 | 12 ～ 40 | 19 ～ 150 | 20 ～ 100 | 15 ～ 80 | 15 ～ 120 | 15 ～ 50 | 20 ～ 40 | 15 ～ 50 | 12 ～ 40 | 12 ～ 100 | 20 ～ 40 | 15 ～ 50 | 20 ～ 30 | 18 ～ 100 | 10 | 12 ～ 50 | 12 ～ 50 | 12 ～ 40 |
| Material | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Resin | Steel / Stainless Steel / Brass | Steel / Stainless Steel | Steel / Stainless Steel / Brass | Steel | Steel | Steel / Stainless Steel | Stainless Steel | Resin | Steel / Resin | Steel / Stainless Steel | Steel | Brass | Steel | Steel | Steel | Steel | Resin | Steel | Steel | Stainless Steel | Resin | Steel | - | - | Steel | Steel | Brass | Steel | Steel | Steel | Steel | Steel | - | Steel | Resin | Stainless Steel | Steel | Steel | Steel |
| Shape | Shape A / Shape B / Shape K | Shape A / Shape B | Shape B / Shape K | Shape A / Shape B / Shape K | Shape A | Shape A / Shape B / Shape K | Shape A / Shape B / Shape K | Shape A / Shape B | Shape A / Shape B / Shape K | Shape B | Shape A / Shape B / Shape K / With Shaft | Shape A / Shape B | Shape B / Shape K | Shape B | Shape A / Shape B | Shape A / Shape B | Shape A / Shape B | Shape B / Shape K | Shape B | Shape B | Shape A / Shape B | Shape B | Shape B | Shape B | Shape B | Shape A | Shape B | Shape B | Shape B | Shape A | Shape B / Shape K | Shape B / With Shaft | Shape B / Shape K | Shape B | Shape B / Shape K | Shape B | Shape B | Shape B | Shape A | Shape B | Shape B | Shape A | Shape B / Shape K | Shape B | Shape B |
| Heat Treatment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Induction Hardened | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Induction Hardened | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Induction Hardened | Not Provided | Induction Hardened | Not Provided | Not Provided | - | Not Provided | Induction Hardened | Others | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Surface Treatment | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Black Oxide Coating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Black Oxide Coating | Not Provided | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Black Oxide Coating | Not Provided | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided | Not Provided | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Black Oxide Coating | Not Provided | Black Oxide Coating | Black Oxide Coating | Not Provided / Black Oxide Coating / Electroless Nickel Plating | Black Oxide Coating | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Black Oxide Coating | Black Oxide Coating | Black Oxide Coating | Not Provided | Not Provided | Not Provided | Black Oxide Coating | Black Oxide Coating | Black Oxide Coating | Black Oxide Coating | Black Oxide Coating | Black Oxide Coating | Black Oxide Coating | Not Provided | Black Chromate | Black Oxide Coating | Black Oxide Coating | Black Oxide Coating |
| Shaft Bore Configuration | Round Hole / Round Hole + Tap / Keyway / Keyway + Tap | Round Hole / Round Hole + Tap / Keyway / Keyway + Tap | Round Hole / Round Hole + Tap / Keyway + Tap | Round Hole / Round Hole + Tap / Keyway / Keyway + Tap | Round Hole / Keyway | Round Hole / Round Hole + Tap | - | - | Round Hole / Round Hole + Tap | Round Hole / Round Hole + Tap / Keyway + Tap | Round Hole / Round Hole + Tap / Keyway + Tap | Round Hole / Round Hole + Tap / Keyway / Keyway + Tap | Round Hole / Round Hole + Tap / Keyway + Tap | Round Hole / Round Hole + Tap / Keyway + Tap | - | Round Hole / Round Hole + Tap / Keyway / Keyway + Tap | - | Round Hole + Tap | - | Round Hole | - | Round Hole | - | Round Hole | Round Hole | Round Hole / Keyway | Round Hole | Round Hole | - | - | Round Hole | Round Hole / Round Hole + Tap | Round Hole / Round Hole + Tap | Round Hole | Round Hole | Round Hole | Round Hole | Round Hole / Round Hole + Tap / Keyway + Tap | - | Round Hole | Round Hole / Round Hole + Tap / Keyway + Tap | Round Hole | Round Hole | Round Hole | Round Hole |
| Ground Tooth | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Provided | Not Provided | Not Provided | Provided | Not Provided | - | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Backlash | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | - | - | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Not Provided | Provided | Provided | Provided |
| Shaft Bore Diameter d(Ø) | 6 ～ 58 | 8 ～ 55 | 3 ～ 50 | 6 ～ 54 | 8 ～ 50 | 3 ～ 56 | 3 ～ 16 | 1 ～ 40 | 4 ～ 48 | 6 ～ 50 | 5 ～ 50 | 8 ～ 70 | 8 ～ 50 | 6 ～ 40 | - | 8 ～ 60 | 6 ～ 56 | 2 ～ 3 | - | 10 ～ 15 | 8 ～ 50 | 25 ～ 30 | 8 ～ 30 | 20 ～ 28 | 18 ～ 28 | 15 ～ 50 | ø4 ～ ø5 | 20 ～ 25 | 10 ～ 40 | 12 ～ 40 | 6 ～ 8 | 6 ～ 20 | 3 ～ 9 | 6 ～ 25 | 8 ～ 10 | 22 ～ 30 | 10 ～ 35 | 6 ～ 45 | 8 ～ 25 | 8 ～ 25 | 8 ～ 40 | 25 | 8 ～ 12 | 12 ～ 20 | 15 ～ 25 |
| Bearing | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | - | - | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Tooth Width B(mm) | 6 ～ 12 | 15 ～ 20 | 5 ～ 90 | 10 ～ 15 | 10 ～ 50 | 2 ～ 35 | 2 ～ 8 | 2 ～ 35 | 3 ～ 7 | 8 ～ 60 | 6 ～ 12 | 25 ～ 30 | 10 ～ 40 | 10 ～ 30 | 12 ～ 20 | 20 ～ 25 | 8 ～ 30 | 2 ～ 4 | 2 ～ 30 | 20 | 10 ～ 30 | 60 | 10 ～ 30 | 50 | 40 | 20 ～ 40 | 10 | 40 | 15 ～ 30 | 20 ～ 30 | 10 | 10 | 3 ～ 6 | 10 ～ 30 | 10 | 50 | 10 ～ 60 | 10 ～ 60 | 10 ～ 60 | 15 ～ 50 | 10 ～ 30 | 18.5 | 15 | 25 | 30 |
| Shaft Bore Tolerance | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | Not Specified / H7 / H8 | H7 | H7 | - | - | H7 | H7 | H8 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | Not Specified | H7 | - | - | H7 | H7 | H7 | H7 | H7 | H7 | H7 | H7 | - | H7 | H7 | H7 | H7 | H7 | H7 |
| Module/Diametrical Pitch | 1 | 2 | - | 1.5 | - | 0.5 ～ 3 | 0.5 | 0.5 ～ 3 | 0.8 | - | - | 3 | - | - | 1 ～ 2 | 2.5 | 1 ～ 3 | - | 0.5 ～ 3 | - | 1 ～ 3 | - | 1 ～ 3 | 5 | 4 | - | 1 | - | 1.5 ～ 3 | 2 ～ 3 | 1 | - | - | 1 ～ CP10 | - | - | - | - | 1 ～ 6 | 1.5 ～ 5 | - | 6 | - | - | - |
| Metal Bushing | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided / Provided (1045 Carbon Steel) / Provided (Stainless Steel303) | - | - | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | - | - | - | - | - | Provided (1025 Carbon Steel) | Not Provided | Not Provided | Not Provided | Not Provided | - | - | - | Not Provided | - | Not Provided | Not Provided | - | - | Not Provided | Not Provided | - | Not Provided | Not Provided | Provided (1045 Carbon Steel) | - | - | - |
Loading...
Configure
Filters
-
Metric / Inch
-
Number of Teeth
-
Material
-
Shape
-
Heat Treatment
- Not Provided
- Induction Hardened
- Others
-
Surface Treatment
- Not Provided
- Black Oxide Coating
- Electroless Nickel Plating
- Black Chromate
-
Shaft Bore Configuration
-
Ground Tooth
-
Backlash
-
Shaft Bore Diameter d(Ø)
-
Bearing
-
Tooth Width B(mm)
-
Shaft Bore Tolerance
-
Module/Diametrical Pitch
-
Metal Bushing
Brand
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy