Days to Ship |
|
---|
NBK
"Shaft hole, keyway and push screw machining standardized."
[Features]
· Japan's first standard inch size product.
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Imbalance mass allowance on outer circumference is 0.2% of pulley mass or 3 g, whichever is larger.
· Same accuracy as the balance prescribed in JIS B 1854-1987, "General use V-pulley".* M-type pulleys are exempt.
[Applications]
· Fans, etc.
Configure Now
Ships as soon as | 4 Days |
---|
EVERON
[Features]
· Shaft hole, and keyway processing, etc. become unnecessary, and delivery date management becomes easy
[Applications]
· For speed change by belt conduction.
Configure Now
Ships as soon as | 4 Days |
---|
NBK
V-belt pulley with high power transmission and large rotation ratio.
[Features]
· High transmission efficiency. ISO 9982 compliant.
· Consistent production from casting to machining and surface treatment.
· Cell production method allows for production of many kinds of products in low volume, with short lead times.
· Allows for a high-transmission efficiency system with a small pulley diameter, short shaft distance and narrow pulley width.
・ Can be attached and removed from shaft and positioned with hex or socket wrench.
· Due to taper fit tightening effect, tightening force is equivalent to shrink fit. Achieves safe and reliable transmission.
· Set imbalance tolerance on the outer circumference to 1 g or 0.1% of the total mass of the pulley and bushing, whichever is larger.
· Balancing is adjusted using a balancing machine.
[Applications]
· Automobiles, manufacturing machinery, air-conditioning equipment, electric tools, household appliances, etc.
Configure Now
Ships as soon as | 6 Days |
---|
NBK
Full lineup of V-belt pulleys that conform to JIS B 1854.
[Features]
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Shaft hole, keyway and push screw machining standardized.
· Extensive product range. 650 size. A: 146 size, B: 218 size, C: 212 size, D: 74 size.
· 369 size has been added into JIS standard 281 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").
[Applications]
· Fans, etc.
Configure Now
Ships as soon as | 4 Days |
---|
NBK
High-speed, high power transmission V-belt pulley that conforms with JIS B 1855.
[Features]
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Enables high speed and high power transmission to make it possible to design a system with a smaller pulley diameter, shorter shaft distance and fewer belts.
· Full lineup. 491 size. 3V: 153 size, 5V: 257 size, 8V: 81 size.
· 230 size has been added into JIS standard 261 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JIS B 1855-1991, "Slim V-pulley").
· Imbalance tolerance on the outer circumference guaranteed to be 0.1% of pulley mass.
[Applications]
· Fans, etc.
Configure Now
Ships as soon as | 5 Days |
---|
Innotech
JIS B1855 narrow width V-pulley dimensions adopted. Nominal diameters ø67 to 630, groove no. 1 to 6. Intermediate sizing also standardized. Wide selection, for easy design. Material exceeds FC200 (greater transmission capacity FC250)
Configure Now
Ships as soon as | 6 Days |
---|
Configure Now
Ships as soon as | 6 Days |
---|
Innotech
Nominal diameter 2 to 24 inches, with 1 to 4 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotator.
[Features]
· A wide range of model configurations: 95 A type, 132 B types and 102 C types, with pitches ranging from 2° to 30° and 1 to 6 grooves.
· High-performance, high-quality NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.
· Dimensional precision to JIS reference standards, with thorough quality control.
· Groove part shape and dimensions table.
· Maximum speed: NS standard V-pulley is recommended to be of circumferential speed under 25 m/s specification.
· Recommended minimum pulley diameter: A type 3° or greater, B type 5° or greater, and C type 8° or greater.
Configure Now
Ships as soon as | 4 Days |
---|
Innotech
• V-belt thickness (mm): 11
• Material: FC200
Configure Now
Ships as soon as | 4 Days |
---|
Innotech
Nominal diameter ø67 to 710, with 1 to 3 runners available in wide selection, good balance measurements, and directly usable on high speed rotator.
[Features]
· SNS JIS V pulley is a new addition to the mechanical series, with 360 types standardized, rotation ratio, distance between shafts etc. can be freely selected.
· Ingenuity has been applied to the shape design etc. to prevent damage to the shaft or bearing.
· Shaft etc. can be preserved, useful for saving labor.
· Can also be used for machines with heavy loads and shocks etc.
· High-precision machining, for good transmission efficiency, and regular rotation ration is achieved.
· As the SNS and JIS V-pulleys, on all balancing machine products, machine using aligned balance measurements, they have good quality high-precision and are directly usable on high-speed rotators.
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 5 Days |
---|
NBK
Lightweight V-belt pulley made of sheet metal.
[Features]
· Rotation molding method imparts a rigidity suitable for light/moderate load transmission in general industrial machinery.
· Pulley grooves are rounded with no sharp corners to avoid damage to the belt.
· Lightweight, so the entire machine, including base, pillow block, etc., can be made lighter and more compact.
[Applications]
· Fans, etc.
Configure Now
Ships as soon as | 5 Days |
---|
Innotech
Nominal diameter ø118 to 900, with 1 to 5 runners available in wide selection, good balance measurements, and directly usable on high-speed rotator.
Configure Now
Ships as soon as | 4 Days |
---|
NBK
Top-quality pulley, with materials, machining precision and balance accuracy exceeding JIS standards.
[Features]
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Shaft hole, keyway and push screw machining standardized.
· A: 146 size, B: 218 size, C: 212 size, D: 74 size.
· 369 size has been added into JIS standard 281 size separately.
· Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Imbalance tolerance on outer circumference is 0.1% of pulley mass.
· Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish.
[Applications]
· Fans, etc.
Configure Now
Ships as soon as | 5 Days |
---|
NBK
Full lineup of V-belt pulleys that conform to JIS B 1854.
[Features]
· Consistent production from casting to machining and surface treatment.
· Shaft hole, keyway and push screw machining standardized.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").
· Imbalance tolerance on outer circumference is 0.1% of pulley mass.
· Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish.
[Applications]
· Fans, etc.
Configure Now
Ships as soon as | 5 Days |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Brand | NBK | EVERON | NBK | NBK | NBK | Innotech | Innotech | Innotech | Innotech | Innotech | Innotech | NBK | Innotech | NBK | NBK |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | |||||||||||||||
CAD |
|
|
|
|
|
|
| ||||||||
Days to Ship | 4 Days | 4 Days | 6 Days | 4 Days | 5 Days | 6 Days | 6 Days | 4 Days | 4 Days | 4 Days | 5 Days | 5 Days | 4 Days | 5 Days | 5 Days |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy