MenuClose
Compression Fittings
| Days to Ship |
|
|---|
-
- Recommendation
Connector - Straight, Insert Fittings, Male BSPT, KFH Series
SMC
Most general model, used for pipework proceeding in the same direction as the female-threaded connector.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- Recommendation
Tees - Union, Self-Align Fittings, DT Series
SMC
Self-aligning type pipe fittings by SMC Corporation.
[Features]
· Can be used with soft copper pipes.
· A non-directional type metal sleeve.
· The sleeve helps protect against external damage.
· Low pressure loss.
[Applications]
· Used for 90° branch connections in both directions.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Connector - Straight, Compression Fittings, Compress-Align, Brass, 68CA Series
Parker Hannifin
Parker's Compress-Align fittings are pre-assembled with a captive sleeve which is always oriented correctly for faster assembly and gives a visible inspection before and after installation. Compress-Align can be used in many areas where flare fittings are used due to the higher pressure rating, meaning no flaring, soldering or tube preparation resulting in faster installation. Compress-Align bodies are interchangeable with standard compression bodies.
Features/Benefits:
• All brass construction
• Captive sleeve
• Higher working pressures versus standard compression fitting
• Bodies interchangeable with standard compression bodies
• Economical
• One wrench turn from finger tight for assembly for all sizes
• 1/8" through 1" sizes available
• U.L. listed for flammable liquids
Applications:
• Air lines
• Lubrication lines
• Fluid transfer
• Chemical dispensing
• Cooling lines
• Machine tool- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Connector - Straight, Quick Seal, Brass, C4N Series
Nitta
It consists of three parts: brass fitting body of connector (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Brass Compression Fittings - 63PT Series
Parker Hannifin
Parker Brass Compression Fittings are an economical solution for use in low pressure, low vibration environments. Sealing is accomplished by inserting tubing into the fitting until it bottoms and tightening the nut on the brass sleeve to form a compression joint. Optional long nut provides additional vibration resistance.
Features/Benefits:
• All brass construction
• Economical
• Long Nut for vibration
• UL listed for flammable liquid
• Meets SAE J-512
• Acetal sleeve for use with thermoplastic tubing
Applications:
• Air lines
• Lubrication lines
• Fluid transfer
• Water lines
• Cooling lines
• Automotive process- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Connector - Straight, Insert Fittings, Male BSPT, KFG3H Series
SMC
[Features]
· Compact, lightweight.
· Grease-free.
· Can be used with steam.
· Conforms to the Food Sanitation Act of Japan.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Sleeve - Quick Seal, Nylon, SN Series【1-20 Pieces Per Package】
Nitta
Composed of three components: fitting body of the nylon sleeve, nut, and sleeve. The fitting body and insert are integrated. Also shows excellent performance at negative pressures.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
90° Elbows - Quick Seal, Brass, L4N Series
Nitta
This 90° brass elbow (mm size) consists of three parts: fitting body, nut, and sleeve. The fitting body and insert come integrated. Also, it is superb in negative pressure performance.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Connector - Straight, Compression Fittings, N2404 Series
Brennan Industries
Brennan’s Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan’s Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
Brennan Instrumentation Tube Fitting Features:
• Self-aligning
• Work on thick and thin wall tubing
• Resist vibration
• Work on a variety of tube materials
• All components are made of the same material for thermal compatibility and corrosion resistance
• Resist temperature cycling
• Compensate for the variables encountered in the tube and materials
• Do not significantly reduce flow area
Performance
• Work in vacuums, as well as at low and high pressures
• Seal at low cryogenic temperatures, as well as elevated t=emperatures rated for the tube
• Seal consistently over a wide range of temperature cycling
• Seal repeatedly under both make and remake conditions
• Resist pressure beyond the tubing burst point
Assembly
• Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
• Do not require disassembly and inspection of ferrule swaging at every make-up
• Do not require any special tools for assembly- Volume Discount is available
Configure Now
Ships as soon as 7 Days -
90° Elbows - Self-Align Fittings, DL Series
SMC
Self-aligning type pipe fittings by SMC Corporation.
[Features]
· Can be used with soft copper pipes.
· A non-directional type metal sleeve.
· The sleeve helps protect against external damage.
· Low pressure loss.
[Applications]
· Used for piping in the same direction from female threads.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
90° Elbows - Swivel, Insert Fittings, KFG2V Series
SMC
[Features]
· Compact, lightweight.
· Grease-free.
· Can be used with steam.
· Conforms to the Food Sanitation Act of Japan.
[Please refer to the following pages of the catalog]
Applicable tube outer diameter, metric p. 325; inch p. 331- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Connector - Straight, Chemifit, CP Series【5 Pieces Per Package】
Nitta
Connectors are injection molded for a smooth inner surface. Does not generate dust or pollution. Uses a special polypropylene resin.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
90° Elbows - Insert Fittings, Male BSPT, KFG2L Series
SMC
[Features]
· Compact, lightweight.
· Grease-free.
· Can be used with steam.
· Conforms to the Food Sanitation Act of Japan.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Swivel Type Parts - Align Fittings, L/N/S Series
SMC
Swivel type components, union nuts, sleeves, elbow connectors and extended elbow connectors.
Configure Now
Ships as soon as Same Day Stock Items Included
-
Connector - Straight, Quick Seal, Insert Type, Brass, C1N Series
Nitta
A 3-point brass connector (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
90° Elbows - Insert Fittings, Male BSPT, KFL Series
SMC
Most general model, used for pipework proceeding at a right angle from the female-threaded connector.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Union - Insert Fittings, Female NPT, KFG2F Series
SMC
[Features]
· Compact, lightweight.
· Grease-free.
· Can be used with steam.
· Conforms to the Food Sanitation Act of Japan.
[Please refer to the following pages of the catalog]
Applicable tube outer diameter, metric p. 326; inch p. 331- CAD Available in 2D and 3D
Configure Now
Ships as soon as 14 Days -
Connector - Straight, Self-Align Fittings, H Series
SMC
Self-aligning type pipe fittings by SMC Corporation.
[Features]
· A non-directional type metal sleeve tightening fitting.
· The sleeve helps protect against external damage.
· Low pressure loss.
· Can be used with soft copper pipes.
[Applications]
· Used for piping in the same direction from female threads.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Connector - Straight, Compression Fittings, Compress-Align, Brass, 66CA Series
Parker Hannifin
Parker's Compress-Align fittings are pre-assembled with a captive sleeve which is always oriented correctly for faster assembly and gives a visible inspection before and after installation. Compress-Align can be used in many areas where flare fittings are used due to the higher pressure rating, meaning no flaring, soldering or tube preparation resulting in faster installation. Compress-Align bodies are interchangeable with standard compression bodies.
Features/Benefits:
• All brass construction
• Captive sleeve
• Higher working pressures versus standard compression fitting
• Bodies interchangeable with standard compression bodies
• Economical
• One wrench turn from finger tight for assembly for all sizes
• 1/8" through 1" sizes available
• U.L. listed for flammable liquids
Applications:
• Air lines
• Lubrication lines
• Fluid transfer
• Chemical dispensing
• Cooling lines
• Machine- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
90° Elbows - Compression Fittings, Compress-Align, Brass, 169CA Series
Parker Hannifin
Parker's Compress-Align fittings are pre-assembled with a captive sleeve which is always oriented correctly for faster assembly and gives a visible inspection before and after installation. Compress-Align can be used in many areas where flare fittings are used due to the higher pressure rating, meaning no flaring, soldering or tube preparation resulting in faster installation. Compress-Align bodies are interchangeable with standard compression bodies.
Features/Benefits:
• All brass construction
• Captive sleeve
• Higher working pressures versus standard compression fitting
• Bodies interchangeable with standard compression bodies
• Economical
• One wrench turn from finger tight for assembly for all sizes
• 1/8" through 1" sizes available
• U.L. listed for flammable liquids
Applications:
• Air lines
• Lubrication lines
• Fluid transfer
• Chemical dispensing
• Cooling lines
• Machine tool- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Nut - Compression Fittings, Compress-Align, Brass, 61CA Series
Parker Hannifin
Parker's Compress-Align fittings are pre-assembled with a captive sleeve which is always oriented correctly for faster assembly and gives a visible inspection before and after installation. Compress-Align can be used in many areas where flare fittings are used due to the higher pressure rating, meaning no flaring, soldering or tube preparation resulting in faster installation. Compress-Align bodies are interchangeable with standard compression bodies.
Features/Benefits:
• All brass construction
• Captive sleeve
• Higher working pressures versus standard compression fitting
• Bodies interchangeable with standard compression bodies
• Economical
• One wrench turn from finger tight for assembly for all sizes
• 1/8" through 1" sizes available
• U.L. listed for flammable liquids
Applications:
• Air lines
• Lubrication lines
• Fluid transfer
• Chemical dispensing
• Cooling lines
• Machine tool- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
90° Elbows - Quick Seal, Insert Type, Brass, L1N1 Series
Nitta
A brass 90° elbow (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Sleeve - Quick Seal, Brass, MSN Series
Nitta
- Composed of three components: the brass sleeve's fitting unit, nut, and sleeve. The fitting unit and insert are integrated. Also shows excellent performance at negative pressures.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
90° Elbows - Chemifit, Male BSPT, CP Series【5 Pieces Per Package】
Nitta
Inner surface of 90° elbow is smooth due to injection molding. Also, it is excellent in non-dusting and non-polluting. A special polypropylene resin is used as a base material.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Connector - Straight, Compression Fittings, 316SS, NSC Series
Pisco
SUS316 is used to provide all materials with excellent corrosion resistance.
[Features]
· SUS316 is used to provide all materials with excellent corrosion resistance.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· Air cleaned and packaged in a Class 1000 clean room .
· Added inch sizes.
· Improved selection.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Connector - Straight, Compression Fittings, PN Series【1-20 Pieces Per Package】
Junkosha
Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings."
The tube insert allows for secure connection of a sleeve and a cap nut.
With collar thread seal for each R (PT) thread size.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
90° Elbows - Compression Fittings, PL Series【1-20 Pieces Per Package】
Junkosha
Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
- New Products
Connector - Straight, Compression Fittings, N2405 Series
Brennan Industries
Brennan’s Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan’s Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
Brennan Instrumentation Tube Fitting Features:
• Self-aligning
• Work on thick and thin wall tubing
• Resist vibration
• Work on a variety of tube materials
• All components are made of the same material for thermal compatibility and corrosion resistance
• Resist temperature cycling
• Compensate for the variables encountered in the tube and materials
• Do not significantly reduce flow area
Performance
• Work in vacuums, as well as at low and high pressures
• Seal at low cryogenic temperatures, as well as elevated t=emperatures rated for the tube
• Seal consistently over a wide range of temperature cycling
• Seal repeatedly under both make and remake conditions
• Resist pressure beyond the tubing burst point
Assembly
• Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
• Do not require disassembly and inspection of ferrule swaging at every make-up
• Do not require any special tools for assembly- Volume Discount is available
Configure Now
Ships as soon as 7 Days -
Union - Bulkhead, Insert Fittings, KFG2E Series
SMC
[Features]
· Compact, lightweight.
· Grease-free.
· Can be used with steam.
· Conforms to the Food Sanitation Act of Japan.
[Please refer to the following pages of the catalog]
Applicable tube outer diameter, metric p. 325; inch p. 330- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Union - Compression Fittings, Compress-Align, Brass, 62CA Series
Parker Hannifin
Parker's Compress-Align fittings are pre-assembled with a captive sleeve which is always oriented correctly for faster assembly and gives a visible inspection before and after installation. Compress-Align can be used in many areas where flare fittings are used due to the higher pressure rating, meaning no flaring, soldering or tube preparation resulting in faster installation. Compress-Align bodies are interchangeable with standard compression bodies.
Features/Benefits:
• All brass construction
• Captive sleeve
• Higher working pressures versus standard compression fitting
• Bodies interchangeable with standard compression bodies
• Economical
• One wrench turn from finger tight for assembly for all sizes
• 1/8" through 1" sizes available
• U.L. listed for flammable liquids
Applications:
• Air lines
• Lubrication lines
• Fluid transfer
• Chemical dispensing
• Cooling lines
• Machine tool- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Socket - Bulkhead, Compression Fittings, 316SS, NSMF Series
Pisco
All materials use SUS316 to provide excellent corrosion resistance.
[Features]
· SUS316, a substance with superior corrosion resistance, was used in all of the materials.
· The no-sleeve-required design eliminates issues of forgetting to attach or losing a sleeve.
· Purified with clean air and packaged in a Class 1000 clean room.
· Added inch sizes.
· Wide selection of products.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Nut - Quick Seal, Brass, N Series【1-20 Pieces Per Package】
Nitta
A brass nut with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Connector - Straight, Quick Seal, Insert Type, 304SS, C1N Series
Nitta
A 3-point stainless steel 90° elbow (inch sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Union - Straight, Insert Fittings, KFG2H Series
SMC
[Features]
· Compact, lightweight.
· Grease-free.
· Can be used with steam.
· Conforms to the Food Sanitation Act of Japan.
[Please refer to the following pages of the catalog]
Applicable tube outer diameter, metric p. 324; inch p. 330- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Connector - Straight, Compression Fittings, Male SAE Thread, N6400 Series
Brennan Industries
Brennan’s Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan’s Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
Brennan Instrumentation Tube Fitting Features:
• Self-aligning
• Work on thick and thin wall tubing
• Resist vibration
• Work on a variety of tube materials
• All components are made of the same material for thermal compatibility and corrosion resistance
• Resist temperature cycling
• Compensate for the variables encountered in the tube and materials
• Do not significantly reduce flow area
Performance
• Work in vacuums, as well as at low and high pressures
• Seal at low cryogenic temperatures, as well as elevated t=emperatures rated for the tube
• Seal consistently over a wide range of temperature cycling
• Seal repeatedly under both make and remake conditions
• Resist pressure beyond the tubing burst point
Assembly
• Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
• Do not require disassembly and inspection of ferrule swaging at every make-up
• Do not require any special tools for assembly- Volume Discount is available
Configure Now
Ships as soon as 7 Days -
Connector - Straight, Compression Fittings, Spatter Resistant, Brass, NKC Series
Pisco
Special brass is used for metal body to greatly improve corrosion resistance to water.
[Features]
· Special brass is used for metal body.
· Corrosion resistance to water has been greatly increased.
· Ideal for use in the automobile industry and for mold temperature control.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· A wide variety is available to support a wide range of applications.
· 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Union - Compression Fittings, N2403 Series
Brennan Industries
Brennan’s Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan’s Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
Brennan Instrumentation Tube Fitting Features:
• Self-aligning
• Work on thick and thin wall tubing
• Resist vibration
• Work on a variety of tube materials
• All components are made of the same material for thermal compatibility and corrosion resistance
• Resist temperature cycling
• Compensate for the variables encountered in the tube and materials
• Do not significantly reduce flow area
Performance
• Work in vacuums, as well as at low and high pressures
• Seal at low cryogenic temperatures, as well as elevated t=emperatures rated for the tube
• Seal consistently over a wide range of temperature cycling
• Seal repeatedly under both make and remake conditions
• Resist pressure beyond the tubing burst point
Assembly
• Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
• Do not require disassembly and inspection of ferrule swaging at every make-up
• Do not require any special tools for assembly- Volume Discount is available
Configure Now
Ships as soon as 7 Days -
- New Products
Ferrule Set - Compression Fittings, N0319-S
Brennan Industries
Brennan’s Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan’s Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
Brennan Instrumentation Tube Fitting Features:
• Self-aligning
• Work on thick and thin wall tubing
• Resist vibration
• Work on a variety of tube materials
• All components are made of the same material for thermal compatibility and corrosion resistance
• Resist temperature cycling
• Compensate for the variables encountered in the tube and materials
• Do not significantly reduce flow area
Performance
• Work in vacuums, as well as at low and high pressures
• Seal at low cryogenic temperatures, as well as elevated t=emperatures rated for the tube
• Seal consistently over a wide range of temperature cycling
• Seal repeatedly under both make and remake conditions
• Resist pressure beyond the tubing burst point
Assembly
• Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
• Do not require disassembly and inspection of ferrule swaging at every make-up
• Do not require any special tools for assembly- Volume Discount is available
Configure Now
Ships as soon as 7 Days -
90° Elbows - Quick Seal, Brass, UL4N Series
Nitta
The fitting main body and insert are integral at three points: sleeve, nut, and fitting main body of the 90° union (mm size) with brass specifications. Excellent negative pressure performance.
[Features]
· The tube is connected by PushOne®.
· No need for jigs nor tools to connect the tube.
· Electroless nickel plated.
· There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
· Flame-retardant resin (equivalent to UL94 V-0 standard) adopted.
· Non-combustible PBT resin is used for the materials.
· Equivalent to UL94 V-0 standard, with superior self-extinguishing properties.
· Can be used in environments in which sputtering occurs.
· The R screws are sealed, and thus there is no need to wrap them with sealing tape.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
- New Products
Connector - Straight, Compression Fittings, Male BSPP Thread, N7002 Series
Brennan Industries
Brennan’s Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan’s Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
Brennan Instrumentation Tube Fitting Features:
• Self-aligning
• Work on thick and thin wall tubing
• Resist vibration
• Work on a variety of tube materials
• All components are made of the same material for thermal compatibility and corrosion resistance
• Resist temperature cycling
• Compensate for the variables encountered in the tube and materials
• Do not significantly reduce flow area
Performance
• Work in vacuums, as well as at low and high pressures
• Seal at low cryogenic temperatures, as well as elevated t=emperatures rated for the tube
• Seal consistently over a wide range of temperature cycling
• Seal repeatedly under both make and remake conditions
• Resist pressure beyond the tubing burst point
Assembly
• Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
• Do not require disassembly and inspection of ferrule swaging at every make-up
• Do not require any special tools for assembly- Volume Discount is available
Configure Now
Ships as soon as 7 Days -
90° Elbows - Swivel, Insert Fittings, KFV Series
SMC
[Features]
· Used for pipework proceeding at a right angle from a female thread.
· A swivel type that can be positioned in any direction.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Tees - Branch, Insert Fittings, KFG2T Series
SMC
[Features]
· Compact, lightweight.
· Grease-free.
· Can be used with steam.
· Conforms to the Food Sanitation Act of Japan.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Tees - Run, Compression Fittings, N2605 Series
Brennan Industries
Brennan’s Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan’s Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
Brennan Instrumentation Tube Fitting Features:
• Self-aligning
• Work on thick and thin wall tubing
• Resist vibration
• Work on a variety of tube materials
• All components are made of the same material for thermal compatibility and corrosion resistance
• Resist temperature cycling
• Compensate for the variables encountered in the tube and materials
• Do not significantly reduce flow area
Performance
• Work in vacuums, as well as at low and high pressures
• Seal at low cryogenic temperatures, as well as elevated t=emperatures rated for the tube
• Seal consistently over a wide range of temperature cycling
• Seal repeatedly under both make and remake conditions
• Resist pressure beyond the tubing burst point
Assembly
• Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
• Do not require disassembly and inspection of ferrule swaging at every make-up
• Do not require any special tools for assembly- Volume Discount is available
Configure Now
Ships as soon as 7 Days -
- New Products
90° Elbows - Compression Fittings, Male NPT, N2501 Series
Brennan Industries
Brennan’s Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan’s Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
Brennan Instrumentation Tube Fitting Features:
• Self-aligning
• Work on thick and thin wall tubing
• Resist vibration
• Work on a variety of tube materials
• All components are made of the same material for thermal compatibility and corrosion resistance
• Resist temperature cycling
• Compensate for the variables encountered in the tube and materials
• Do not significantly reduce flow area
Performance
• Work in vacuums, as well as at low and high pressures
• Seal at low cryogenic temperatures, as well as elevated t=emperatures rated for the tube
• Seal consistently over a wide range of temperature cycling
• Seal repeatedly under both make and remake conditions
• Resist pressure beyond the tubing burst point
Assembly
• Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
• Do not require disassembly and inspection of ferrule swaging at every make-up
• Do not require any special tools for assembly- Volume Discount is available
Configure Now
Ships as soon as 7 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Connection Type |
| Tube Size 1(mm) |
| Thread-to-Tube Connection Shape |
| Tube-to-Tube Connection Shape |
| Thread-to-Tube Multipoint Connection Shape |
| Related Components, Shapes, Types |
| Thread Size 1 |
| Material |
| Tube Inner Diameter(mm) |
| Thread Types |
| Surface Treatment |
| Smaller Diameter Section Thread |
| Thread Size 2 |
| Tube Size 2(mm) |
| Smaller Dia. Section Tube Inner Dia.(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SMC | SMC | Parker Hannifin | Nitta | Parker Hannifin | SMC | Nitta | Nitta | Brennan Industries | SMC | SMC | Nitta | SMC | SMC | Nitta | SMC | SMC | SMC | Parker Hannifin | Parker Hannifin | Parker Hannifin | Nitta | Nitta | Nitta | Pisco | Junkosha | Junkosha | Brennan Industries | SMC | Parker Hannifin | Pisco | Nitta | Nitta | SMC | Brennan Industries | Pisco | SMC | Brennan Industries | Brennan Industries | Nitta | Brennan Industries | SMC | SMC | Brennan Industries | Brennan Industries |
| Product Series | Connector - Straight, Insert Fittings, Male BSPT, KFH Series | Connector - Straight, Compression Fittings, Compress-Align, Brass, 68CA Series | Connector - Straight, Insert Fittings, Male BSPT, KFG3H Series | Sleeve - Quick Seal, Nylon, SN Series【1-20 Pieces Per Package】 | Connector - Straight, Chemifit, CP Series【5 Pieces Per Package】 | Connector - Straight, Quick Seal, Insert Type, Brass, C1N Series | Connector - Straight, Compression Fittings, Compress-Align, Brass, 66CA Series | 90° Elbows - Compression Fittings, Compress-Align, Brass, 169CA Series | Nut - Compression Fittings, Compress-Align, Brass, 61CA Series | 90° Elbows - Chemifit, Male BSPT, CP Series【5 Pieces Per Package】 | Connector - Straight, Compression Fittings, 316SS, NSC Series | Connector - Straight, Compression Fittings, PN Series【1-20 Pieces Per Package】 | 90° Elbows - Compression Fittings, PL Series【1-20 Pieces Per Package】 | Union - Compression Fittings, Compress-Align, Brass, 62CA Series | Connector - Straight, Quick Seal, Insert Type, 304SS, C1N Series | Connector - Straight, Compression Fittings, Male SAE Thread, N6400 Series | Connector - Straight, Compression Fittings, Spatter Resistant, Brass, NKC Series | Connector - Straight, Compression Fittings, Male BSPP Thread, N7002 Series | |||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
| Days to Ship |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 7 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included | 14 Days |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day
Stock Items Included |
Same Day
Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 7 Days |
Same Day Stock Items Included |
Same Day
Stock Items Included | 4 Days | 4 Days | 4 Days |
Same Day Stock Items Included | 7 Days | 4 Days |
Same Day Stock Items Included | 7 Days | 7 Days | 4 Days | 7 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 7 Days | 7 Days |
| Connection Type | Thread to Tube Connection | Tube to Tube Equal Dia. Connection | - | Thread to Tube Connection | - | Thread to Tube Connection | Related Components | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Related Components | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | - | - | - | Thread to Tube Connection | Related Components | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Tube to Tube Equal Dia. Connection | - | Related Components | Related Components | Thread to Tube Connection | Tube to Tube Equal Dia. Connection | Thread to Tube Connection | Thread to Tube Connection | Related Components | Tube to Tube Equal Dia. Connection / Tube to Tube Different Dia. Connection | Related Components | Tube to Tube Equal Dia. Connection | Thread to Tube Connection | Thread to Tube Connection | Tube to Tube Equal Dia. Connection | Thread to Tube Multipoint Connection | Thread to Tube Connection |
| Tube Size 1(mm) | 4 ～ 12 | 4 ～ 12 | 1/2" ～ 5/16" | 4 ～ 16 | 1/2" ～ 3/16" | 3.18 ～ 16 | 3.18 ～ 16 | 4 ～ 16 | 1" ～ 5/16" | 4 ～ 12 | 3.18 ～ 16 | 4 ～ 12.7 | 3.18 ～ 16 | 4 ～ 12 | 3.18 ～ 15.88 | 4 ～ 12 | 3.18 ～ 16 | 4 ～ 12 | 1/4" ～ 3/8" | 1/2" ～ 5/16" | 1/2" ～ 5/16" | 3.18 ～ 15.88 | 3.18 ～ 16 | 4 ～ 12.7 | 4 mm ～ 16 mm | 3.18 mm ～ 16 mm | 3.18 mm ～ 16 mm | 1/2" ～ 5/16" | 3.18 ～ 16 | 1/2" ～ 5/16" | - | 3.18 ～ 16 | 6.35 ～ 12.7 | 3.18 ～ 16 | 1/2" ～ 5/8" | 4 mm ～ 16 mm | - | 1" ～ 5/16" | 1" ～ 5/16" | 4 ～ 12 | 1/2" ～ 3/8" | 4 ～ 12 | 3.18 ～ 16 | 1/2" ～ 3/8" | 1/2" ～ 5/16" |
| Thread-to-Tube Connection Shape | Male Straight | - | - | Male Straight | - | Male Straight | - | Elbows | Male Straight | Elbows | Elbows | Male Straight | Elbows | - | Male Straight | Male Straight | Female Straight | Male Straight | - | - | - | Elbows | - | Elbows | Male Straight | Male Straight | Elbows | Female Straight | - | - | - | - | Male Straight | - | Male Straight | Male Straight | - | - | - | - | Male Straight | Elbows | - | - | Male Elbow |
| Tube-to-Tube Connection Shape | - | Tees | Straight | - | Straight | - | - | - | - | - | - | - | - | - | - | - | - | - | Straight | Elbows | - | - | - | - | - | - | - | - | Bulkhead Union | Straight | - | - | - | Straight | - | - | - | Straight | - | Elbows | - | - | Tees | - | - |
| Thread-to-Tube Multipoint Connection Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Tees | - |
| Related Components, Shapes, Types | - | - | - | - | - | - | Sleeves | - | - | - | - | - | - | Nuts / Sleeves / Other Related Components | - | - | - | - | - | - | Nuts | - | Sleeves | - | - | - | - | - | - | - | Sockets | Nuts | - | - | - | - | Sleeves | - | Other Related Components | - | - | - | - | - | - |
| Thread Size 1 | 1/2 ～ 3/8 | - | 1" ～ 13/16" | 1/2 ～ 3/8 | - | 1/2 ～ 3/8 | - | 1/2 ～ 3/8 | 1" ～ 3/8" | 1/2 ～ 3/8 | 1/2 ～ 3/8 | 1/2 ～ 3/8 | 1/2 ～ 3/8 | - | 1/2 ～ 3/8 | 1/2 ～ 3/8 | 1/2 ～ 3/8 | 1/2 ～ 3/8 | 5/16" ～ 9/16" | 1" ～ 13/16" | 1/2" ～ 11/16" | 1/2 ～ 3/8 | - | 1/2 ～ 3/8 | 1/2 ～ 3/8 | 1/2 ～ 3/8 | 1/2 ～ 3/8 | 1/2" ～ 3/8" | - | 1" ～ 11/16" | 1/2 ～ 3/8 | M6 ～ M22 | 1/2 ～ 3/8 | - | 1/2" ～ 5/8" | 1/2 ～ 3/8 | - | - | - | - | 1/2" ～ 1/8" | 1/2 ～ 3/8 | - | 1/2" ～ 3/8" | 1/2" ～ 3/8" |
| Material | Copper | Copper | Brass | Brass | Brass | Stainless Steel | Plastic | Brass | Stainless Steel | Copper | Stainless Steel | Plastic | Stainless Steel | - | Brass | Copper | Stainless Steel | Copper | Brass | Brass | Brass | Brass | Brass | Plastic | Stainless Steel | Copper | Copper | Stainless Steel | Stainless Steel | Brass | Stainless Steel | Brass | Stainless Steel | Stainless Steel | Stainless Steel | Brass | - | Stainless Steel | Stainless Steel | Brass | Stainless Steel | Copper | Stainless Steel | Stainless Steel | Stainless Steel |
| Tube Inner Diameter(mm) | 2.5 ～ 9 | - | - | 2 ～ 13 | - | 2.18 ～ 13 | - | 2 ～ 13 | 1.3mm ～ 22.3mm | - | 2.18 ～ 13 | - | 2.18 ～ 13 | - | - | 2.5 ～ 9 | 2.18 ～ 13 | - | - | - | - | - | - | - | 2 ～ 13 | 2.36 ～ 13 | 2.36 ～ 13 | 2.4mm ～ 15.8mm | 2.18 ～ 13 | - | - | - | - | 2.18 ～ 13 | 4.8mm ～ 15.8mm | 2.5 ～ 13 | - | 1.3mm ～ 22.3mm | 4.8mm ～ 22.3mm | 2 ～ 9 | 2.4mm ～ 9.9mm | 2.5 ～ 9 | 2.18 ～ 13 | 7.1mm ～ 9.9mm | 2.4mm ～ 15.8mm |
| Thread Types | R | - | - | R | - | R / NPT | - | R | NPT | R | R / NPT | R | R / NPT | - | R | R | Rc / NPT | R | - | - | - | R | - | R | R | R | R | NPT | - | - | Rc | M | R | - | SAE | R | - | - | - | - | R | R | - | NPT | NPT |
| Surface Treatment | Nickel Plating ～ Not Provided | Not Provided | - | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Nickel Plating ～ Not Provided | Not Provided | Not Provided | - | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Nickel Plating ～ Not Provided | Not Provided | Not Provided | Not Provided |
| Smaller Diameter Section Thread | - | - | NPT | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | NPT | NPT | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Size 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tube Size 2(mm) | - | - | 1/2" ～ 3/8" | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/4" ～ 3/8" | 1/2" ～ 3/8" | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1" ～ 5/16" | - | - | - | - | - | 1/2" ～ 3/8" | - |
| Smaller Dia. Section Tube Inner Dia.(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.3mm ～ 22.3mm | - | - | - | - | - | 7.1mm ～ 9.9mm | - |
Loading...
Configure
Filters
-
Connection Type
-
Metric / Inch
-
Tube Size 1(mm)
-
Thread-to-Tube Connection Shape
-
Tube-to-Tube Connection Shape
-
Thread-to-Tube Multipoint Connection Shape
-
Related Components, Shapes, Types
-
Thread Size 1
-
Material
-
Tube Inner Diameter(mm)
-
Thread Types
-
Surface Treatment
- Nickel Plating
- Not Provided
-
Smaller Diameter Section Thread
-
Thread Size 2
-
Tube Size 2(mm)
-
Smaller Dia. Section Tube Inner Dia.(mm)
Brand
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy