MenuClose
Manual Goniometer Stages
| Days to Ship |
|
|---|
-
Manual Goniometer Stages - 1-Axis, Dovetail, GFG
MISUMI
Circular Arc Motion Stages with arc centers located on central perpendicular line above the stage tops.
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Manual Goniometer Stages - 2-Axis, Dovetail, GFWG
MISUMI
Circular Arc Motion Stages with arc centers located on central perpendicular line above the stage tops.
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 7 Days -
Manual Goniometer Stages - 1-Axis, Dovetail, B54
Suruga Seiki
A cost-effective dovetail goniometer stage that uses a worm gear feed mechanism.
[Features]· A wide range of variations
Ideal size can be selected according to the mounted object
(25 × 25 mm, 30 × 30 mm, 40 × 40 mm, 50 × 50 mm, 60 × 60 mm, 80 × 80 mm)
Vernier scale (minimum reading 0.1°) is attached to the side, and the clamp position can be selected from L and R according to the installation location
[Applications]
・ Can be used in a wide range of applications such as research and development, jigs, production equipment, equipment integration, etc.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Manual Goniometer Stages - 1-Axis, Cross Roller Guide, GPG
MISUMI
Goniometer Stages with high precision. Excellent operability makes them suitable for frequent positioning applications.
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 7 Days -
Manual Goniometer Stages - 1-Axis, Crossed Roller Guide, Micrometer, B58
Suruga Seiki
A high-resolution, high-accuracy goniometer stage that uses a crossed roller for the travel guide and a micrometer for the feed mechanism.[Features]・ High accuracy
High accuracy of rotation center runout accuracy of 0.01 mm or less
· Wide variations
The clamp position can be selected from L and R according to the installation location, and the micrometer position can be selected from center-drive and side drive
The stage surface size can be selected from 40 × 40 mm, 50 × 50 mm, 60 × 60 mm, 70 × 70 mm
[Applications]・ Precision adjustment of cameras, microscopes, sensors and optical components
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Manual Goniometer Stages - Symmetrical Use, 2-Axis, Dovetail Groove, DSGFWG
MISUMI
Symmetrical Stack, 2-axis Stages useable in limited spaces.
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 7 Days -
Manual Goniometer Stages - 1-Axis, High Precision, Low Profile
Chuo Precision Industrial
A single-shaft slope stage with differing rotational center positions and transfer amounts.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Manual Goniometer Stages - 2-Axis, Cross Roller Guide, GPWG
MISUMI
Goniometer Stages with high precision. Excellent operability makes them suitable for frequent positioning applications.
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 7 Days -
Manual Goniometer Stages - 1-Axis, Dovetail, Higher Load
Chuo Precision Industrial
[Features]
▪ Single-shaft tilt stage with different rotational axis heights and travel.
▪ When combined with a single-shaft tilt stage with different rotational axis heights, it can be a dual-axis tilt stage with the same rotational axis.
▪ The proprietary combination coupling mechanism allows fine and very smooth operation.
▪ Uses dovetail groove (D-T type) for the travel guide.
▪ Can be widely used for applications requiring the precise positioning of cameras, sensors, and other items- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Manual Goniometer Stages - 2-Axis, Dovetail, Higher Load
Chuo Precision Industrial
[Features]
· 2-axis inclination stage with different rotation center heights and travel amounts.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Manual Goniometer Stages - 2-Axis, Dovetail, B55
Suruga Seiki
A cost-effective two-axis dovetail goniometer stage that uses a worm gear feed mechanism.
"Features” · Various variations
The optimum size can be selected according to the mounted object.
(25 × 25 mm, 30 × 30 mm, 40 × 40 mm, 50 × 50 mm, 60 × 60 mm, 80 × 80 mm)
In addition to the vernier scale (minimum reading 0.1°) on the side, the clamp position can be selected from L and R according to the installation location.
[Applications]
・ It can be used in a wide range of applications such as research and development, jigs, production equipment, and embedment of equipment- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Manual Goniometer Stages - 1-Axis, Crossed Roller Guide, Worm Gear, B56
Suruga Seiki
High accuracy and smooth operation goniometer stage that uses a crossed roller guide and a worm gear feed mechanism.Ideal for frequent operations.
[Features]・ High accuracy
High accuracy of rotation center runout accuracy of 0.01 mm or less
· Wide variations
Vernier scale (minimum reading 0.1°) is attached to the side, and the clamp position can be selected from L and R according to the installation location
[Applications]・ Precision adjustment of cameras, microscopes, sensors and optical components
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Manual Goniometer Stages - 2-Axis, Crossed Roller Guide, Worm Gear, B57
Suruga Seiki
High-accuracy goniometer stage with excellent operability that uses a crossed roller for the travel guide and a worm gear for the feed mechanism.
It is ideal for frequent operations.
・ High accuracy
High accuracy of 0.01 mm or less of rotation center deflection accuracy.
· Wide variations
In addition to the vernier scale (minimum reading 0.1°) on the side, the clamp position can be selected from L and R according to the installation location.
"Applications" · Precision adjustment of cameras, microscopes, sensors, and optical parts
・ For positioning during production, assembly and inspection processes related to semiconductors and measuring instruments- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 6 Days -
Manual Goniometer Stages - 2-Axis, High Precision, Low Profile
Chuo Precision Industrial
Single-shaft slope stage with different rotational axis heights and transfer amounts.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 8 Days -
Manual Goniometer Stages - Dovetail, High Precision, TGOH
NBK
Goniometer stage used for tilting and rotating. A compact stage with minimal protruding parts. Effective for saving space and combined use.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 6 Days -
Manual Goniometer Stages - Horizontal Type, Dovetail, High Precision, Smooth Operation
Chuo Precision Industrial
A single-shaft horizontal slope stage with differing rotational center positions and transfer amounts.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 53 Days -
Manual Goniometer Stages - Clamp-Less Fixed Stage, 25 x 25
Chuo Precision Industrial
[Features]
· Clampless stage that stays in place after position adjustment.
· Special mechanism to prevent backlash.
· Use hex wrench to adjust position. * Hex wrench not included.
· Supports specially shaped wrenches instead of hex wrench (optional).
· Ideal for workpieces that must remain stationary after camera or sensor position adjustment instead of requiring constant adjustment.
· Small, with a surface size of 25 mm square, and can comprise 6 axes.
· Combine with a single-axis inclination stage with a different rotation center height to create a 2-axis inclination stage with the same rotation center.
· Can be installed horizontally, vertically or upside-down.Configure Now
Ships as soon as 8 Days -
Manual Goniometer Stages - 2-Axis, Crossed Roller Guide, Micrometer, B59
Suruga Seiki
High-resolution, high-accuracy goniometer stage that uses a crossed roller for the travel guide and a micrometer for the feed mechanism.
"Features” · Various variations
The clamp position can be set either on the right or the left in order to adapt to the installation location,
while certain available types allow the micrometer orientation to be selected from either center-drive or side-drive.
The stage surface size can be selected from 40 × 40 mm, 50 × 50 mm, 60 × 60 mm, 70 × 70 mm.
"Applications" · Precision adjustment of cameras, microscopes, sensors, and optical parts
・ For positioning during production, assembly and inspection processes related to semiconductors and measuring instruments- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Manual Goniometer Stages - 2-Axis, Clamp-Less Fixed Stage, Through Hole
Chuo Precision Industrial
[Features]
· Clampless stage that stays in place after position adjustment.
· Special mechanism to prevent backlash.
· Use hex wrench to adjust position. * Hex wrench not included.
· Supports specially shaped wrenches instead of hex wrench (optional).
· Ideal for workpieces that must remain stationary after camera or sensor position adjustment instead of requiring constant adjustment.
· The stage has a transmission hole at the center.
· Can be installed horizontally, vertically and upside-down.Configure Now
Ships as soon as 6 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Goniometer Axis |
| Travel (Range)(mm) |
| Load Capacity (Range)(N) |
| Table Size (Length) L (Range)(mm) |
| Table Size (Width) W (Range)(mm) |
| Overall Height H (Range)(mm) |
| Feeding Method |
| Center of Rotation Height (Range)(mm) |
| Guiding Mechanism |
| Table Material |
| Table Surface Treatment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | Suruga Seiki | MISUMI | Suruga Seiki | MISUMI | Chuo Precision Industrial | MISUMI | Chuo Precision Industrial | Chuo Precision Industrial | Suruga Seiki | Suruga Seiki | Suruga Seiki | Chuo Precision Industrial | NBK | Chuo Precision Industrial | Chuo Precision Industrial | Suruga Seiki | Chuo Precision Industrial |
| Product Series | Manual Goniometer Stages - 1-Axis, Crossed Roller Guide, Micrometer, B58 | Manual Goniometer Stages - Symmetrical Use, 2-Axis, Dovetail Groove, DSGFWG | Manual Goniometer Stages - 1-Axis, High Precision, Low Profile | Manual Goniometer Stages - 1-Axis, Crossed Roller Guide, Worm Gear, B56 | Manual Goniometer Stages - 2-Axis, Crossed Roller Guide, Worm Gear, B57 | Manual Goniometer Stages - 2-Axis, High Precision, Low Profile | Manual Goniometer Stages - Horizontal Type, Dovetail, High Precision, Smooth Operation | Manual Goniometer Stages - 2-Axis, Crossed Roller Guide, Micrometer, B59 | Manual Goniometer Stages - 2-Axis, Clamp-Less Fixed Stage, Through Hole | ||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Days to Ship |
Same Day Stock Items Included | 7 Days |
Same Day Stock Items Included | 7 Days | 4 Days | 7 Days | 4 Days | 7 Days | 4 Days | 4 Days | 4 Days | 4 Days | 6 Days | 8 Days | 6 Days | 53 Days | 8 Days | 4 Days | 6 Days |
| Specifications |
|
|
|
|
| ||||||||||||||
| Goniometer Axis | X Axis | XY Axis | - | X Axis | - | XY Axis | X Axis | XY Axis | X Axis | XY Axis | - | - | - | XY Axis | X Axis | X Axis | X Axis | - | XY Axis |
| Travel (Range)(mm) | Up to ±10 | Up to ±10 / ±10 to 20 / ±20 or More | Up to ±10 / ±10 to 20 / ±20 or More | Up to ±10 | - | Up to ±10 / ±10 to 20 / ±20 or More | Up to ±10 | Up to ±10 | Up to ±10 / ±10 to 20 / ±20 or More | Up to ±10 | Up to ±10 / ±10 to 20 / ±20 or More | Up to ±10 | Up to ±10 | Up to ±10 | Up to ±10 | Up to ±10 | - | - | - |
| Load Capacity (Range)(N) | 5 to 30 / 30.1 to 50 / 50.1 to 100 | 5 to 30 / 30.1 to 50 / 50.1 to 100 | 5 to 30 / 30.1 to 50 / 50.1 to 100 | 5 to 30 / 30.1 to 50 | 5 to 30 / 30.1 to 50 | 5 to 30 / 30.1 to 50 / 50.1 to 100 | 30.1 to 50 / 50.1 to 100 | 5 to 30 / 30.1 to 50 | 5 to 30 / 30.1 to 50 / 50.1 to 100 | 1 to 4.9 / 5 to 30 / 30.1 to 50 | 5 to 30 / 30.1 to 50 / 50.1 to 100 | 5 to 30 / 30.1 to 50 | 5 to 30 / 30.1 to 50 | 30.1 to 50 | 5 to 30 / 30.1 to 50 | 5 to 30 | 1 to 4.9 | 5 to 30 / 30.1 to 50 | 5 to 30 |
| Table Size (Length) L (Range)(mm) | Up to 25 / 26 to 40 / 41 to 60 / 61 to 90 | Up to 25 / 26 to 40 / 41 to 60 / 61 to 90 | Up to 25 / 26 to 40 / 41 to 60 / 61 to 90 | 26 to 40 / 41 to 60 / 61 to 90 | 26 to 40 / 41 to 60 / 61 to 90 | Up to 25 / 26 to 40 / 41 to 60 / 61 to 90 | 41 to 60 / 61 to 90 | 26 to 40 / 41 to 60 / 61 to 90 | 26 to 40 / 41 to 60 | Up to 25 / 26 to 40 / 41 to 60 | Up to 25 / 26 to 40 / 41 to 60 / 61 to 90 | 41 to 60 / 61 to 90 | 41 to 60 / 61 to 90 | 41 to 60 | Up to 25 / 26 to 40 / 41 to 60 | 41 to 60 | Up to 25 | 26 to 40 / 41 to 60 / 61 to 90 | 26 to 40 |
| Table Size (Width) W (Range)(mm) | Up to 25 / 26 to 40 / 41 to 60 / 61 to 90 | Up to 25 / 26 to 40 / 41 to 60 / 61 to 90 | Up to 25 / 26 to 40 / 41 to 60 / 61 to 90 | 26 to 40 / 41 to 60 / 61 to 90 | 26 to 40 / 41 to 60 / 61 to 90 | Up to 25 / 26 to 40 / 41 to 60 / 61 to 90 | 41 to 60 / 61 to 90 | 26 to 40 / 41 to 60 / 61 to 90 | 26 to 40 / 41 to 60 / 91 to 120 | Up to 25 / 26 to 40 / 41 to 60 | Up to 25 / 26 to 40 / 41 to 60 / 61 to 90 | 41 to 60 / 61 to 90 | 41 to 60 / 61 to 90 | 41 to 60 | Up to 25 / 26 to 40 / 41 to 60 | 41 to 60 | Up to 25 | 26 to 40 / 41 to 60 / 61 to 90 | 26 to 40 |
| Overall Height H (Range)(mm) | 1 to 15 ～ 25.1 to 30 | 25.1 to 30 ～ 50.1 to 60 | 1 to 15 ～ 25.1 to 30 | 15.1 to 20 ～ 25.1 to 30 | 15.1 to 20 ～ 50.1 to 60 | 25.1 to 30 ～ 50.1 to 60 | - | 35.1 to 40 ～ 50.1 to 60 | - | - | 25.1 to 30 ～ 50.1 to 60 | 15.1 to 20 ～ 25.1 to 30 | 35.1 to 40 ～ 50.1 to 60 | - | 1 to 15 ～ 30.1 to 35 | - | - | 15.1 to 20 ～ 50.1 to 60 | - |
| Feeding Method | Worm Gears | Worm Gears | Worm Gears | Micrometer Heads | Micrometer Heads | Worm Gears | - | Micrometer Heads | Feed Screw | Feed Screw | Worm Gears | Worm Gears | Worm Gears | - | - | Feed Screw | Feed Screw | Micrometer Heads | Feed Screw |
| Center of Rotation Height (Range)(mm) | 15.1 to 20 ～ 100.1 or More | 15.1 to 20 ～ 90.1 to 100 | 15.1 to 20 ～ 100.1 or More | 35.1 to 40 ～ 100.1 or More | 40.1 to 50 ～ 100.1 or More | 15.1 to 20 ～ 90.1 to 100 | - | 1 to 15 ～ 90.1 to 100 | - | - | 15.1 to 20 ～ 90.1 to 100 | 40.1 to 50 ～ 100.1 or More | 40.1 to 50 ～ 90.1 to 100 | - | 1 to 15 ～ 40.1 to 50 | - | 35.1 to 40 ～ 50.1 to 60 | 35.1 to 40 ～ 100.1 or More | - |
| Guiding Mechanism | Dovetail Slide | Dovetail Slide | Dovetail Slide | Cross Roller | Cross Roller | Dovetail Slide | Dovetail Slide | Cross Roller | Dovetail Slide / Slide Guide | Dovetail Slide / Slide Guide | Dovetail Slide | Cross Roller | Cross Roller | Dovetail Slide | Dovetail Slide | Dovetail Slide | Slide Guide | Cross Roller | Shaft Slide |
| Table Material | Brass | Brass | Aluminum / Brass | Aluminum Alloy | Aluminum | Brass | Aluminum Alloy | Aluminum Alloy | Brass / Aluminum Alloy | Brass / Aluminum Alloy | Aluminum / Brass | Aluminum / Brass / Brass, Phosphor Bronze | Aluminum / Brass | Aluminum Alloy | Brass | Brass | Aluminum Alloy | Aluminum | Aluminum Alloy |
| Table Surface Treatment | - | - | Black Oxide / Black Fluoro Resin | Black Anodize / Clear Anodize | Black Anodize / Clear Anodize | - | Black Anodize | Black Anodize / Clear Anodize | Black Anodize / Low Temperature Black Chrome | Black Anodize / Low Temperature Black Chrome | Black Fluoro Resin | Black Anodize / Clear Anodize / Nickel Chrome | Clear Anodize / Nickel Chrome | Black Anodize | Low Temperature Black Chrome | Low Temperature Black Chrome | Black Anodize | Black Anodize / Clear Anodize | Black Anodize |
Loading...
Configure
Filters
-
Metric / Inch
-
Goniometer Axis
-
Travel (Range)(mm)
-
Load Capacity (Range)(N)
-
Table Size (Length) L (Range)(mm)
-
Table Size (Width) W (Range)(mm)
-
Overall Height H (Range)(mm)
The height is from the bottom to the top of the mounting surface. The micrometer head is not counted for the measurement.
-
Feeding Method
-
Center of Rotation Height (Range)(mm)
-
Guiding Mechanism
-
Table Material
-
Table Surface Treatment
CAD
-
- 2D
- 3D
Related Categories to Manual Goniometer Stages
-
- Base Plates for Manual Stages
- Brackets for Manual Stages
- Manual Goniometer Stages
- Manual Multi-Axis Stages
- Manual Rotary Stages
- Manual Tilt Stages
- Manual X-Axis Stages
- Manual XY-Axis Stages
- Manual XYZ-Axis Stages
- Manual XZ-Axis Stages
- Manual Z-Axis Stages
- Micrometer Heads & Feed Screws
- Mounting Accessories for CCD Cameras
- Positioning Stage Suction Plates
- Rods, Mounts & Cross Clamps
- Scales for Manual Stages
-
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy