Days to Ship |
|
---|
Controllers/Drivers - Stepping Motor Driver
Suruga Seiki
This driver is recommended when using a motion controller board or PLC positioning/locating unit and driving an automatic stage without using a Surugaseiki-made controller.
Configure Now
Ships as soon as | 6 Days |
---|
Cables - Stage and Controller/Driver Connection Cable, Configurable Length - 2 m to 6 m
MISUMI
Cables to connect Motorized Stages and Controllers.
Select cable length and type for application specific requirements.
A connector for motorized stage is cramped, and the other end is either left loose or cramped with a controller connector.
Configure Now
Ships as soon as | 7 Days |
---|
Software - DS102/112 Controller Software
Suruga Seiki
This is software for Windows to easily set and control the stepping motor controller DS102/DS112 connected through USB or RS232C.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Controllers/Drivers - DC24V Input Driver
MISUMI
To drive our motorized stages with motion control board (not with our motorized stage controller), we recommend to use the following drivers;
MSDR24-MS: DC24V driver with microstep (1-1/250 divisions)*
* MSDR24-MS has smooth driver function that will reduce vibration and noise.
For details, please refer to the following operation manual (CRD5107P)
https://www.orientalmotor.com/products/pdfs/opmanuals/HP-4189-7E.pdf
MSDR24-TP: DC24V driver with microstep (1-1/250 divisions) for 2-Phase Stepping Motor.
For details, please refer to the following operation manual (CVD215-K)
Configure Now
Ships as soon as | 7 Days |
---|
Cables - Configurable Connection Cable, Stage to Controller/Driver, 2 m to 6 m Length
Suruga Seiki
[Features]
· Connection cable between the automatic stage and stepping motor controller.
· Many cables including the standard 2m cable are available.
· Two to six cables (by 2 m).
· One end discrete wire cable (The controller side is a loose wire).
· Robot cable.
· These cables can be selected when purchasing an automatic stage
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Cables - Controller Communication Cables
MISUMI
Use link cables to control 4 or 6 axes by establishing linkage among multiple units of controllers (MSCTL102/112).
Use I/O cables to connect controllers (MSCTL102/112) with other devices.
Use RS232C or USB cable to connect from PC or Comms device to controllers (MSCTL102/112).
Configure Now
Ships as soon as | 7 Days |
---|
Cables - DC24V Input Driver Cables
MISUMI
A set of the following 3 cables;
1) between driver and DC power supply
2) between driver and motor
3) between driver and controller
Connectors same as those bundled with DC24V input drivers are already crimped to one end of 600mm cables, so that they can be easily inserted to the driver slots without crimping works. The opposite ends are left loose.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Configure Now
Ships as soon as | 11 Days |
---|
Cables - Connection Cables for Stage and Controller or Driver for Chuo Precision Industrial
Chuo Precision Industrial
[Features]
· Cable for connecting controllers/drivers to stages.
· Driver-side open connection type cable is wired only to stage-side connector.
Configure Now
Ships as soon as | 4 Days |
---|
Cables - DC24V Type Input Driver Cable
Suruga Seiki
A product with crimped 600 m cable and connector attached to driver.
Configure Now
Ships as soon as | 6 Days |
---|
Accessories - Emergency Stop Switch for QT Series Controllers
Chuo Precision Industrial
• Withstand Voltage: AC2, 500V, 50/60Hz, 1min (between homopolar terminals, between terminal and grounding)
• External Dimension (mm): W68XD75XH105.5 (Not Including Protrusion)
• Insulation Resistance: 100MΩ or more (DC250V megger)
Configure Now
Ships as soon as | 91 Days |
---|
Accessories - DC24V Compatible Sensor Amplifier Circuit Board, K-PCBA24
Suruga Seiki
It is used to drive a motorized stage with a built-in EE-SX1103 sensor using a motion control board or PLC without using the SURUGA SEIKI controller.Since the stage with a built-in EE-SX1103 sensor operates at 5 V DC, the output current can only flow approximately 1 mA and cannot be directly connected to the control device.
By incorporating the K-PCBA24 as a sensor amplifier, the power supply voltage is 24 V DC and the output current can flow up to 500 mA.
Configure Now
Ships as soon as | 6 Days |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Brand | Suruga Seiki | MISUMI | Suruga Seiki | MISUMI | Suruga Seiki | MISUMI | MISUMI | Suruga Seiki | Chuo Precision Industrial | Suruga Seiki | Chuo Precision Industrial | Suruga Seiki |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Cables - Stage and Controller/Driver Connection Cable, Configurable Length - 2 m to 6 m | Cables - Configurable Connection Cable, Stage to Controller/Driver, 2 m to 6 m Length | Cables - Connection Cables for Stage and Controller or Driver for Chuo Precision Industrial | Accessories - Emergency Stop Switch for QT Series Controllers | Accessories - DC24V Compatible Sensor Amplifier Circuit Board, K-PCBA24 | |||||||
CAD |
|
| ||||||||||
Days to Ship | 6 Days | 7 Days |
Same Day
Stock Items Included | 7 Days |
Same Day Stock Items Included | 7 Days |
Same Day Stock Items Included | 11 Days | 4 Days | 6 Days | 91 Days | 6 Days |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy