Laser Holders

• 

  LD Holder

  Suruga Seiki

  F511L: Fixed type. LD holder with adjustable F512L and F513L: YZ axes. Select according to the number of LD pins and pin pitch (Pin P.C.D).

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	8 Days

• 

  Sensor/laser holder

  Suruga Seiki

  [Features]
  · The tilt angle of a small sensor or laser pointer can be adjusted.
  · A P.C.D.32 tap hole is processed in the holder surface, and therefore please mount on various adapter plates.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	8 Days

• 

  LD Holder (Chip Carrier Type)

  Suruga Seiki

  [Features]
  · Chip Carrier type LD holder that contains a Peltier device.
  · A Peltier element and calibrated 10kΩ thermistor sensor are built-in.
  · You can switch between the anode and the cathode of the LD by reconnecting the jumper pin.
  · There are two types of Chip Carrier type LD holder. Set the holder, depending on how the LD is attached (the radiation direction).
  · A D-sub 9 pin female connector is used for driving LD, and a D-sub 9 pin male connector for the temperature controller.
  · Adapter for water-cooling F129-1 is also available.
  · The low-temperature cyclic water tank can stabilize or lower temperature.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	8 Days

• 

  Tilting/Rotating Small Laser Holder

  Chuo Precision Industrial

  [Features]
  · The IR-CL tilting/rotating laser holder is a laser holder that can be used for mounting small semiconductor lasers and base lasers. It also features dual-axis tilt adjustment and single-axis rotation adjustment capabilities to facilitate optical axis alignment.

  Configure Now

  Ships as soon as	4 Days

• 

  LD holder (To-Package type)

  Suruga Seiki

  [Features]
  · LD holder of To-Package type with built-in Peltier element.
  · A Peltier element and calibrated 10kΩ thermistor sensor are built-in.
  · The LD sizes are φ 5.6 (pin PCD, 2.0) and φ 9.0 (pin PCD, 2.54) for three and four pins, respectively.
  · In addition, anode common, cathode common, etc. are set by replacing the jumper pin.
  · For the connector, D-sub9 pin female are D-sub9 pin male are used for LD drive and temperature control, respectively.
  · The adapter F129-1 for water cooling is also available.
  · Usage of a low-temperature circulation water tank, etc. enables more stabilization and lower temperature.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	7 Days

• 

  Round Laser Holder

  Suruga Seiki

  [Features]
  · F20 fixes the laser with three screws, and adjusts optical axis with the screws coming in and out of the body.
  · In addition to the function of F20, F21 enables you to adjust θy direction by operating the screw of the holder bottom.
  · For both F20 and F21, two types of holders, L= 150 and 250, are provided according to the length of the laser.
  · The standard rod has 20 mm of diameter and 60 mm of length; however, the diameter and the length can be changed at your request.
  · If you remove the fixed screw from its bottom, the laser hold can be fixed at a position 50 mm further from the space in which the holder can move (only for F20-150, and 250).
  · By removing the rod, you can attach F20 to the breadboard (A65) directly.

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	4 Days

• 

  Water cooling adapter

  Suruga Seiki

  [Features]
  · Adapter for water cooling for LD holder F125/F126/F127.
  · Connection with a low-temperature circulating water layer enables better temperature stability and better low temperature control.
  · Connect it with a 1/4 inch hose (No hose is included)

  CAD Available in 2D and 3D

  Configure Now

  Ships as soon as	4 Days

Loading...