MenuClose
Oil Gauges
| Days to Ship |
|
|---|
-
Musashi Oil Seal
Allows you to accurately check oil and fluid surface levels in oil tanks and gear boxes. Provides oil resistance, heat resistance, pressure resistance, and airtightness, and is used in a wide range of applications.
Configure Now
Ships as soon as Same Day Stock Items Included
-
Long Oil Gauge, General Use, Acrylic, KLA-A・KLA-B
Kyowa
The product is wider and thicker than type A or B. M14 and M16 mounting bolts are provided to accommodate high viscosity oil. The main body uses improved heat resistant type methacrylic resin.
Configure Now
Ships as soon as 4 Days -
Musashi Oil Seal
Allows you to accurately check oil and fluid surface levels in oil tanks and gear boxes. Provides oil resistance, heat resistance, pressure resistance, and airtightness, and is used in a wide range of applications.
Configure Now
Ships as soon as Same Day Stock Items Included
-
Long Oil Gauge, General-Purpose, KL・KL2
Kyowa
Special synthetic resin is used for the bolts and set parts. In addition, the oil window part is made of a transparent resin with excellent shock resistance and minimal load deformation.
[Features]
· Special synthetic resin is used for the mounting bolts and set parts for KL type oil gauge.
· Transparent resin with excellent shock resistant and minimal load deformation is used for the oil gauge windows.
· The mounting bolts, set parts and oil window are joined by a connecting bar to facilitate easy sealing, using the mounting packing, when installing the oil gauge.
· The KL, KL2 type reflector is provided with a red graduation line on the white background and a white mark on the underside of the oil window part. This enables visual checking of the oil level and also the condition of the oil.
· The KL, KL2 type can be dissembled/assembled easily and the internal parts are simple to repair.
· Pressure resistance: 0.5–0.8 MPa, heat resistance: 90°C.
· In the KL2 type, only the support lines of the reflector differ—the pitch and other dimensions are same as the KL type.Configure Now
Ships as soon as 4 Days -
Long Oil Gauge, General Use, KDL・KDL2
Kyowa
The width of the oil window is larger compared to the KL type, giving more readability. The mounting bolt and set parts use heat resistant reinforced resin. The oil window part is made of transparent resin with high shock resistance and low deformation under load.
Configure Now
Ships as soon as 4 Days -
Koho Industrial
The transparent main body is made from an ultra-hard synthetic resin. It will not break no matter how hard it is struck.
Configure Now
Ships as soon as Same Day Stock Items Included
-
Fluid Level Sight Glasses - Aluminum, With Limit Indicator, GN 537 Series,
JW WINCO
No thread is required for installing the GN 537 fluid level sight glasses.
The fluid level sight glass is inserted into the bore d2, tolerance H11. By simply tightening the ring nut using the pin key, the seal is pressed against the contact surface which, at the same time, holds the sight glass in position.
For removal, reverse the procedure.
Application is limited to non-pressurized or slightly pressurized tanks.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
HCX-BW-SST - Column level indicators -for hot water technopolymer
ELESA
Ultrasound welding to guarantee a perfect seal.
Maximum fluid level visibility even from side positions.
Lens effect for a better visibility of the fluid level.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
HCZ. - Column level indicators -with or without protection frame technopolymer
ELESA
Ultrasound welding to guarantee a perfect seal.
Lens effect for a better visibility of the fluid level and temperature.
Special openings in the protection frame provide maximum fluid level visibility even from side positions.
All shocks are absorbed by the frame that transmits them directly onto the wall of the reservoir.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Fluid Level Sight Glasses - Aluminum, With Natural Resistance, GN 743 Series, Metric
JW WINCO
GN 743 Fluid level sight glasses offer the following features:
1. Genuine glass of high stability and scratch proof.
2. Sealing with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
3. The seal is housed in a groove and it can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened. The location of this seal allows also the softer elastomer which guarantees better and easier sealing.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Heat Resistant/Chemical Resistant, Oil Gauge, with Round Screws, KMH Type
Kyowa
The product can endure constant temperatures of 135°C thanks to adoption of heat resistant reinforced resin. It is also superior in chemical resistance (such as against operational oil, water glycol, and phosphoric acid ester). The seal part is made of heat resistant rubber, and the gauge window of heat-resistant tempered glass.
Configure Now
Ships as soon as 4 Days -
HCK. - Column level indicators - with level and temperature sensor
ELESA
Glass-fibre reinforced polyamide based (PA) technopolymer, black colour. Maximum fluid level visibility even from side positions.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Round Oil Gauge for General Use, Drive-In (Press-Fit) Type KC・KCM Type
Kyowa
Any remaining oil is automatically fed outside of the oil gauge, eliminating false readings of remaining oil. Prevents accidents caused by running out of oil. The reflection plate inside the gauge is white. This brightens the inside of the gauge so that you can check for oil even from a distance.
Configure Now
Ships as soon as 4 Days -
Round General Use Oil Gauge, KB and KB-HL Types
Kyowa
The KB type features high heat resistant urethane plastic, around the area of the oil gauge. This allows a usage temperature of 90°C. The oil gauge has a built-in remaining oil guide that provides accurate notification when running low on oil.
[Features]
• KB type.
• This product features all-in-one production.
• The rubber encasing the oil gauge uses urethane manufactured with automated machinery utilizing a double layer formation method.
• This molding method is unique to our company, and features technology that can shorten the assembly process.
• For the internal structure, the KC and KD types are identical utilizing oil guide component K.
• It uses urethane resin that has high heat resistance.
• This enables use at a temperature of 90° C.
• The KB-HL type differs only by the reflective plate, with the outer diameter, width, and other dimensions are all the same as the KB type.Configure Now
Ships as soon as 11 Days -
HE. - Oil level indicators -push- fit polycarbonate
ELESA
• Material: Technopolymer
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Fluid Level Sight Glasses - Aluminum, With ESG Glass, GN 743.1 Series, , Inch Measurements
JW WINCO
GN 743.1 Fluid level sight glasses offer the following features:
1. Genuine glass of high stability and scratch proof.
2. Sealing with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
3. The seal is housed in a groove and it can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened. The location of this seal allows also the softer elastomer which guarantees better and easier sealing.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Oil Level Sight Glasses - Plastic, With Synthetic Rubber Gasket, TLT Series,
JW WINCO
TLT, a low cost choice for light duty applications.
Configure Now
Ships as soon as 5 Days -
W Type, Red Circle (Hiromaru) (Drive-In)
Koho Industrial
[Features]
· The transparent main body is made from an ultra-hard synthetic resin. It will not break no matter how hard it is struck.
· The reflector is white and the red line and rising sun flag are visible even in slightly dark places.
· The reflector is oil-repelling, so there is no risk of oil contamination.
· Cleaning can be performed at any time during removal and mounting.Configure Now
Ships as soon as 4 Days -
Round Oil Gauge for General Use, Drive-In (Press-Fit) Type KD・KDM Type
Kyowa
Any residual oil is automatically fed outside of the oil gauge, eliminating false readings due to residual oil. Prevents accidents caused by running out of oil. The reflection plate inside the gauge is white. This brightens the inside of the gauge so that you can check for the presence of oil even from a distance.
Configure Now
Ships as soon as 4 Days -
Round Oil Gauge, General Purpose, Screw Type, KDS Type
Kyowa
[Features]
▪ Since the mounting bolt itself performs the distribution of the oil, mounting is easily done by using two (or four) processed screws on the product to be used.
▪ KDS type cover can be easily removed.
▪ Therefore, by removing the cover, the internal parts can be cleaned even if the oil gauge is mounted.
▪ Light reflector prints the H, L line with red color on a white background. Therefore, the oil quantity, and also slightest change in oil can be confirmed.Configure Now
Ships as soon as 4 Days -
Long Oil Gauge - General Purpose Nylon Made - KLA-SN
Kyowa
The oil gauge body is made of polyamide resin. The oil gauge has the same functions same as the KLA-A type (acrylic resin products), but costs less.
[Features]
▪This KLA-SN type oil gauge is made from transparent polyamide resin.
▪ The oil gauge has the same functions as the KLA-A type (acrylic resin products), but costs less.
▪The degree of transparency is good and the oil level can be reliably read using white printing on the back and the built-in float.
*The black float is standard, but if a red float is required, please specify when ordering.
(Note) The operating temperature range is -30°C to 90°C.
The standard KLA-SN product is manufactured with two red lines (SN-A) at the top and bottom, but products a yellow line at the top (SN-B type) and products without any indicator line (SN-C type) can also be manufactured.Configure Now
Ships as soon as 4 Days -
Fluid Level Sight Glasses - Brass, With Natural Float Glass, BSPT or NPT Threads, GN 743.7 Series,
JW WINCO
The conical thread of GN 743.7 fluid level sight glasses makes a metallic seal possible. When the male thread is tightened, it wedges itself within the appropriate female thread.
At the reference level "a", the male thread has the same thread diameter as the female thread, so that it can be fastened in by hand. The secure tightening by means of a tool increases the length of engagement and seals the screw connection. Additionally a sealant (fibrous or fluoropolymer band) is usually used. The thread is "roughened", so that the sealant does not shift during fastening.
GN 743.7 fluid level sight glasses can be used on pressurized oil tanks.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Fluid Level Sight Glasses - Brass, With natural ESG Glass, BSPT or NPT Threads, GN 743.8 Series,
JW WINCO
The conical thread of GN 743.8 fluid level sight glasses makes a metallic seal possible. When the male thread is tightened, it wedges itself within the appropriate female thread.
At the reference level "a", the male thread has the same thread diameter as the female thread, so that it can be fastened in by hand. The secure tightening by means of a tool increases the length of engagement and seals the screw connection. Additionally a sealant (fibrous or fluoropolymer band) is usually used. The thread is "roughened", so that the sealant does not shift during fastening.
GN 743.8 fluid level sight glasses can be used on pressurized oil tanks.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
V Type, Red Circle (Hiromaru) (Drive-In)
Koho Industrial
The transparent main body is made from an ultra-hard synthetic resin. It will not break no matter how hard it is struck.
Configure Now
Ships as soon as Same Day Stock Items Included
-
Round Oil Gauge with Included Standard Oil Filler Opening
Kyowa
Easy to install. Simply remove the lid to top-up the oil. Includes an internal gauge for accurate oil level reading. The main body uses a heat-resistant transparent resin features for superior resistance against oils, heat, and impact.
Configure Now
Ships as soon as 4 Days -
Long Oil Gauge for Standard Pipes, KLPC-N, without Indicating Line
Kyowa
The KLPC-N type is a series of KLPC types gauges without the red vertical line printed on the gauge tube. The main body and gauge tube are connected and sealed by a simple O-ring. Therefore, this allows a degree of tolerance in the mounting pitch.
Configure Now
Ships as soon as 4 Days -
Metal, Oil Gauge, Long, L, KLM-L・KLM-LS
Kyowa
Features improved heat resistance and chemical resistance, with a float added to the gauge tube for improved visibility of oil surface.
Configure Now
Ships as soon as 4 Days -
HCK. - Column level indicators -with or without transparent protection technopolymer
ELESA
In laboratory tests carried out with mineral oil type CB68 (according to ISO 3498) at 23°C for a limited period of time, the values of pressure resistance were much higher than 35 bar.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
HFTX. - Oil level indicators -Technopolymer
ELESA
The particular shape of the magnifying lens increases and improves visibility even from side positions.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
HGFT. - Oil level indicators -Technopolymer
ELESA
Polyamide based (PA) technopolymer, black or red colour, glossy finish (HGFT/SL only black colour).
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Fluid Level Sight Glasses - Aluminum, With Natural Resistance, GN 743 Series, , Inch Measurements
JW WINCO
GN 743 Fluid level sight glasses offer the following features:
1. Genuine glass of high stability and scratch proof.
2. Sealing with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
3. The seal is housed in a groove and it can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened. The location of this seal allows also the softer elastomer which guarantees better and easier sealing.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Fluid Level Sight Glasses - Brass, With Natural Glasses, GN 743.2 Series, Metric
JW WINCO
GN 743.2 Fluid level sight glasses offer the following features:
1. Genuine natural glass of high stability and scratch proof.
2. Sealing with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
3. Outside diameter is chosen to match mounting holes for tube fittings.
Seal is housed in a groove and therefore cannot be lost. Meanwhile, this groove prevents the seal from being extruded when the sight glass is tightened. The location of this seal also allows the use of a softer Elastomer, which guarantees better and easier sealing.Configure Now
Ships as soon as 5 Days -
Fluid Level Sight Glasses - Stainless Steel, With ESG Glass, GN 743.5 Series, Metric
JW WINCO
GN 743.5 Fluid level sight glasses offer the following features:
1. Genuine glass of high stability and scratch proof.
2. Sealing with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
3. Outside diameter is chosen to match mounting holes for tube fittings.
Seal is housed in a groove and therefore cannot be lost. Meanwhile, this groove prevents the seal from being extruded when the sight glass is tightened. The location of this seal also allows the use of a softer Elastomer, which guarantees better and easier sealing.
Fluid level sight glasses GN 743.5 can be used on pressurized oil tanks.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Fluid Level Sight Glasses - Stainless Steel, With ESG Glass, GN 743.5 Series, , Inch Measurements
JW WINCO
GN 743.5 Fluid level sight glasses offer the following features:
1. Genuine glass of high stability and scratch proof.
2. Sealing with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
3. Outside diameter is chosen to match mounting holes for tube fittings.
Seal is housed in a groove and therefore cannot be lost. Meanwhile, this groove prevents the seal from being extruded when the sight glass is tightened. The location of this seal also allows the use of a softer Elastomer, which guarantees better and easier sealing.
Fluid level sight glasses GN 743.5 can be used on pressurized oil tanks.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Koho Industrial
As the reflector repels oil, there is no need to worry about the reflector being dirtied by oil.
Easy to remove and clean even if impurities enter from the oil inlet/outlet.
[Features]
The transparent main body is made from ultra-hard synthetic resin. It will not break no matter how hard it is struck.
Since the reflector is white and the red line is visible even in rather dark areas, the oil level is displayed clearly.
· The reflector has oil repelling properties, so there is no concern about oil contamination.
· Because the window and the reflector come off easily just by removing the top and bottom screws, even if products that are difficult to install/remove are soiled, they can be cleaned anytime.
· About 100°C for heating.
· Easy to install just by drilling screw holes in line with the top and bottom holes (with mounting screw at the center), and tightening the top and bottom screws.
· Do not overtighten the screws while installing. (Tightening torque: Approximately 15 kgf/cm).Configure Now
Ships as soon as 4 Days -
Round Oil Gauge with General-Use Screw
Kyowa
This screw-in product has an O-ring for sealing element. The main body is highly resistant to impact and is made of a special resin which has excellent transparency.
A residual oil guide element is built into the oil gauge, and accurately informs the user when the device is out of oil.
[Features]
- Like other round oil gauges, the KMS type oil gauge with screw has a built-in guide element, so it is able to accurately inform the user when the device is out of oil.
- KMS is a screw-in product with an O-ring for sealing element.
- As a result the device can be installed and removed easily and can be cleaned immediately when it becomes dirty inside.
- The KIS-2 does not include a reflector.
- Flat packing is also available.
- Please indicate if flat packing is required.Configure Now
Ships as soon as 4 Days -
General Purpose Round Oil Gauge KF Type (Flange Type)
Kyowa
[Features]
▪ Conventional oil gauges have parts that need to be tightened with different bolts, but this product is designed to be compact by consolidating the parts.
▪ It can be installed easily with only four bolts. After installation, the machine has a deluxe appearance.Configure Now
Ships as soon as 4 Days -
W Type, Two Indicator Lines (Drive-In)
Koho Industrial
[Features]
· The transparent main body is made from an ultra-hard synthetic resin, which resistant to breaking and impact damage.
· The reflector is white. Hence, the red lines and the Japanese flag are visible in low-level light.
· The reflector has oil repelling properties, which alleviates the risk of oil contamination.
· Easy to attach/detach, which makes it easier to clean the reflector by simply removing it from the main body.
· Heat-resistant to approx. 100°C.Configure Now
Ships as soon as 4 Days -
HCX-E - Column level indicators -with MIN level electrical sensor technopolymer
ELESA
The column level indicator HCX-E, in addition to the visual control, generates an electric signal when the oil level drops to a minimum.
Ultrasound welding to guarantee a perfect seal.
Maximum fluid level visibility even from side positions.
Lens effect for a better visibility of the fluid level.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Fluid Level Sight Glasses - Aluminum, With ESG Glass, GN 743.1 Series, Metric
JW WINCO
GN 743.1 Fluid level sight glasses offer the following features:
1. Genuine glass of high stability and scratch proof.
2. Sealing with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
3. The seal is housed in a groove and it can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened. The location of this seal allows also the softer elastomer which guarantees better and easier sealing.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Fluid Level Sight Glasses - Brass, With Natural Glasses, GN 743.2 Series, , Inch Measurements
JW WINCO
GN 743.2 Fluid level sight glasses offer the following features:
1. Genuine natural glass of high stability and scratch proof.
2. Sealing with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
3. Outside diameter is chosen to match mounting holes for tube fittings.
Seal is housed in a groove and therefore cannot be lost. Meanwhile, this groove prevents the seal from being extruded when the sight glass is tightened. The location of this seal also allows the use of a softer Elastomer, which guarantees better and easier sealing.Configure Now
Ships as soon as 5 Days -
Fluid Level Sight Glasses - Brass/ ESG Glass, GN 743.3 Series, , Inch Measurements
JW WINCO
GN 743.3 Fluid level sight glasses offer the following features:
1. Genuine ESG glass of high stability and scratch proof.
2. Sealing with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
3. Outside diameter is chosen to match mounting holes for tube fittings according to DIN 3865.
Seal is housed in a groove and therefore cannot be lost. Meanwhile, this groove prevents the seal from being extruded when the sight glass is tightened. The location of this seal also allows the use of a softer Elastomer, which guarantees better and easier sealing.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Fluid Level Sight Glasses - Aluminum/ ESG Glass, ATEX Explosion Protective, GN 743.6 Series, Metric
JW WINCO
GN 743.6 the European guidelines for explosion protection (ATEX) also cover explosion protection in the mechanical sector.Fluid level sight glasses GN 743.6 are suitable for use in an explosion risk environment.
Other features include:
1. Genuine glass of high stability and scratch proof.
2. Sealing with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
3. Seal is housed in a groove and therefore cannot be lost. Meanwhile, this groove prevents the seal from being extruded when the sight glass is tightened. The location of this seal also allows the use of a softer Elastomer, which guarantees better and easier sealing.
Heat resistance: -20°C (-4°F) to 150°C (300°F).- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
JW WINCO
GN 743.6 the European guidelines for explosion protection (ATEX) also cover explosion protection in the mechanical sector.Fluid level sight glasses GN 743.6 are suitable for use in an explosion risk environment.
Other features include:
1. Genuine glass of high stability and scratch proof.
2. Sealing with an O-ring on the periphery and not on the face edge of the glass. Leak tightness is therefore not affected by axial pressures.
3. Seal is housed in a groove and therefore cannot be lost. Meanwhile, this groove prevents the seal from being extruded when the sight glass is tightened. The location of this seal also allows the use of a softer Elastomer, which guarantees better and easier sealing.
Heat resistance: -20°C (-4°F) to 150°C (300°F).- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
MN Type (Metal) (for Heat Resistance)
Koho Industrial
[Features]
• Please use the MN1/2 type red circle (Hinomaru) with high-speed machines prone to severe oil foaming.
• Use the reflector-less MN1/2 type if you wish to be able to view inside.
• The reflector is white, ensuring that the red circle (Hinomaru) symbol is visible even in low light.
• The reflector has oil repelling properties, so you don't need to worry about oil staining/contamination.
• Extremely easy mounting and removal, so, even if the reflector gets dirty, the body can be removed and cleaned at any time.Configure Now
Ships as soon as 4 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Types |
| Flange |
| Rectangle Type |
| Additional Functions for Level Visibility |
| Added Function |
| Round-Shaped Type, Mounting Portion Outer Diameter(φ) |
| Round-Shaped Type, Mounting Hole Pitch(mm) |
| Round-Shaped Type, Thread Nominal |
| Rectangle Type Thread Nominal |
| Body Material |
| Maximum Operating Temperature(°C) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Musashi Oil Seal | Kyowa | Musashi Oil Seal | Kyowa | Kyowa | Koho Industrial | JW WINCO | ELESA | ELESA | JW WINCO | Kyowa | ELESA | Kyowa | Kyowa | ELESA | JW WINCO | JW WINCO | Koho Industrial | Kyowa | Kyowa | Kyowa | JW WINCO | JW WINCO | Koho Industrial | Kyowa | Kyowa | Kyowa | ELESA | ELESA | ELESA | JW WINCO | JW WINCO | JW WINCO | JW WINCO | Koho Industrial | Kyowa | Kyowa | Koho Industrial | ELESA | JW WINCO | JW WINCO | JW WINCO | JW WINCO | JW WINCO | Koho Industrial |
| Product Series | Fluid Level Sight Glasses - Aluminum, With Limit Indicator, GN 537 Series, | HCX-BW-SST - Column level indicators -for hot water technopolymer | HCZ. - Column level indicators -with or without protection frame technopolymer | Fluid Level Sight Glasses - Aluminum, With Natural Resistance, GN 743 Series, Metric | Heat Resistant/Chemical Resistant, Oil Gauge, with Round Screws, KMH Type | HCK. - Column level indicators - with level and temperature sensor | Round Oil Gauge for General Use, Drive-In (Press-Fit) Type KC・KCM Type | Fluid Level Sight Glasses - Aluminum, With ESG Glass, GN 743.1 Series, , Inch Measurements | Oil Level Sight Glasses - Plastic, With Synthetic Rubber Gasket, TLT Series, | Round Oil Gauge for General Use, Drive-In (Press-Fit) Type KD・KDM Type | Fluid Level Sight Glasses - Brass, With Natural Float Glass, BSPT or NPT Threads, GN 743.7 Series, | Fluid Level Sight Glasses - Brass, With natural ESG Glass, BSPT or NPT Threads, GN 743.8 Series, | Long Oil Gauge for Standard Pipes, KLPC-N, without Indicating Line | HCK. - Column level indicators -with or without transparent protection technopolymer | Fluid Level Sight Glasses - Aluminum, With Natural Resistance, GN 743 Series, , Inch Measurements | Fluid Level Sight Glasses - Brass, With Natural Glasses, GN 743.2 Series, Metric | Fluid Level Sight Glasses - Stainless Steel, With ESG Glass, GN 743.5 Series, Metric | Fluid Level Sight Glasses - Stainless Steel, With ESG Glass, GN 743.5 Series, , Inch Measurements | HCX-E - Column level indicators -with MIN level electrical sensor technopolymer | Fluid Level Sight Glasses - Aluminum, With ESG Glass, GN 743.1 Series, Metric | Fluid Level Sight Glasses - Brass, With Natural Glasses, GN 743.2 Series, , Inch Measurements | Fluid Level Sight Glasses - Brass/ ESG Glass, GN 743.3 Series, , Inch Measurements | Fluid Level Sight Glasses - Aluminum/ ESG Glass, ATEX Explosion Protective, GN 743.6 Series, Metric | ||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||
| Days to Ship |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included | 4 Days | 4 Days |
Same Day Stock Items Included | 5 Days | 4 Days | 4 Days | 5 Days | 4 Days | 4 Days | 4 Days | 11 Days | 4 Days | 5 Days | 5 Days | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days | 5 Days |
Same Day Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days | 5 Days | 5 Days | 5 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 4 Days |
| Types | Disc Guage | Rectangle | Disc Guage | Rectangle | Rectangle | Disc Guage | - | - | - | - | Disc Guage | - | Disc Guage | Disc Guage | - | - | - | Disc Guage | Disc Guage | Disc Guage | Rectangle | - | - | Disc Guage | Disc Guage | Rectangle | Rectangle | - | - | - | - | - | - | - | Rectangle | Disc Guage | Disc Guage | Disc Guage | - | - | - | - | - | - | Disc Guage |
| Flange | Fitting (With Flange) | - | Fitting (No Flange) | - | - | Fitting (With Flange) | - | - | - | - | Screw-In Type | - | Fitting (With Flange) | Fitting (No Flange) | - | - | - | Fitting (No Flange) | Fitting (With Flange) | Screw Type | - | - | - | Fitting (With Flange) | Screw Type | - | - | - | - | - | - | - | - | - | - | Screw-In Type | Screw Type | Fitting (No Flange) | - | - | - | - | - | - | Screw-In Type |
| Rectangle Type | - | Standard | - | Standard | Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Standard | - | - | - | - | Pipe Type | L-Type | - | - | - | - | - | - | - | Standard | - | - | - | - | - | - | - | - | - | - |
| Additional Functions for Level Visibility | Gage Mark | No / Line / Float | Gage Mark | Scale / Line | Scale | Line | - | - | - | - | Gage Mark | - | Gage Mark | Line / Gage Mark | - | - | - | Gage Mark | Line | Line | Line / Float | - | - | Gage Mark | Line | Float | No / Float | - | - | - | - | - | - | - | Scale | Gage Mark | Line | Line | - | - | - | - | - | - | Gage Mark |
| Added Function | Heat Resistant | - | Heat Resistant | No | No | No | - | - | - | - | Heat Resistant / Chemical Resistant Products | - | No / Heat Resistant | Heat Resistant | - | - | - | No | Heat Resistant | No | With Thermometer | - | - | No | Heat Resistant / With Oil Supply Port | No | Heat Resistant / Chemical Resistant Products | - | - | - | - | - | - | - | No | No | No | No | - | - | - | - | - | - | Heat Resistant |
| Round-Shaped Type, Mounting Portion Outer Diameter(φ) | 20 ～ 50 | - | 20 ～ 50 | - | - | 20 ～ 58.5 | - | - | - | - | - | - | 20.5 ～ 60.5 | 20.15 ～ 40.2 | 17 ～ 45 | - | - | 25 ～ 40 | 20.5 ～ 59 | - | - | - | - | 20 ～ 58.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 ～ 40 | - | - | - | - | - | - | - |
| Round-Shaped Type, Mounting Hole Pitch(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 20 ～ 38 | - | - | - | - | 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Round-Shaped Type, Thread Nominal | - | - | - | - | - | - | - | - | - | - | G1 ～ G3/8 | - | - | - | - | - | - | - | - | - | - | - | - | - | M6 | - | - | - | G1 ～ G3/8 | G1 ～ G3/8 | - | - | - | - | - | G1 ～ M35 | M5 ～ M6 | - | - | - | - | - | - | - | G1 ～ G3/4 |
| Rectangle Type Thread Nominal | - | M8 ～ M12 | - | M8 ～ M10 | M8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | M10 | - | - | - | - | M10 | G1/2 ～ M8/M10 | - | - | - | - | - | - | - | M8 | - | - | - | - | - | - | - | - | - | - |
| Body Material | Resin | Resin | Resin | Resin | Resin | Resin | Metal | - | - | Metal | Resin | - | Resin | Resin | - | Metal | - | Resin | Resin | Resin | Resin | Metal | Metal | Resin | Resin | Resin | Metal | - | - | - | Metal | Metal | Metal | Metal | Resin | Resin | Resin | Resin | - | Metal | Metal | Metal | Metal | Metal | Metal |
| Maximum Operating Temperature(°C) | 80 | 90 | 80 | 90 | 90 | 100 | - | - | - | - | 135 | - | 90 | 90 | - | - | - | 100 | 90 | 90 | 90 | - | - | 100 | 90 | 90 | 135 | - | - | - | - | - | - | - | 100 | 90 | 90 | 100 | - | - | - | - | - | - | 180 |
Loading...
Configure
Filters
-
Types
-
Flange
-
Rectangle Type
-
Additional Functions for Level Visibility
-
Added Function
-
Metric / Inch
-
Round-Shaped Type, Mounting Portion Outer Diameter(φ)
-
Round-Shaped Type, Mounting Hole Pitch(mm)
-
Round-Shaped Type, Thread Nominal
-
Rectangle Type Thread Nominal
-
Body Material
-
Maximum Operating Temperature(°C)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy