MenuClose
Sanitary Fittings
| Days to Ship |
|
|---|
-
Sanitary Pipe Fittings - Ferrule Connector
MISUMI
• Type: Fitting
• Fitting Shape: Straight
• Connection Type 1 Left Large Diameter Side: ISO Ferrule Union
• Connection Type 2 Right Small Diameter Side: Weld-On
• Dia., Center: Equal Dia., Concentric- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Gasket - Ferrule, Type B, GS-C Series, Sanitary Fittings
Osaka Sanitary
ISO-compliant sanitary gasket.
Configure Now
Ships as soon as Same Day Stock Items Included
-
Sanitary Pipe Fittings - Ferrule Gasket
MISUMI
The fitting product line-up has become more various.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Ferrule - Weld-on, CLF2-W Series, Sanitary Fittings
Osaka Sanitary
A sanitary rule that is compliant with ISO standards. Made in Japan.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cap - RC Thread, Ferrule, Weld-on, CLF-BRC Series, Sanitary Fittings
Osaka Sanitary
Made in Japan—polished inside/outside (#320–400)
[Features]
· Extremely low liquid penetration, which dramatically reduces gasket odor.
· Optimally suited when introducing hazard analysis and critical control points (HACCP).
· Extracts from the material are extremely low, making it optimally suited to ultra-clean processes.
· The rubber properties are retained even at high temperatures.
· Can be sealed sufficiently even in steam plumbing lines (operating temperature: ≤ 145°C).
· Superior sealing properties at high temperatures. Therefore, it is also suitable for aseptic lines and systems.
· Can be used with most drug solutions where conventional rubber was difficult to use.
· Can be used for the following chemical solutions without any problems.
· E.g. sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, and nitric acid, etc.Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Sanitary Pipe Fittings - Clamp, Medium/High Pressure
MISUMI
The fitting product line-up has become more various.
- Volume Discount is available
- Spec Expansion
- New Pricing
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Sanitary Adapter Fittings - Flanged End, Ferrule End
MISUMI
• Type: Fitting
• Fitting Shape: Conversion Adapter
• Connection Type 1 Left Large Diameter Side: ISO Ferrule Union
• Connection Type 2 Right Small Diameter Side: Flange
• Dia., Center: Equal Dia., Concentric- Volume Discount is available
- Lead Time Reduction
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 7 Days -
Clamp - ISO Ferrule, Union Fitting, CP2K Series, Sanitary Fittings
Osaka Sanitary
Sanitary clamp for the medium to low pressures
Configure Now
Ships as soon as Same Day Stock Items Included
-
Sanitary Adapter Fittings - Ferrule End, Threaded End
MISUMI
Conversion fittings for sanitary pipes and other pipe types.
- Volume Discount is available
- Lead Time Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as Same Day Stock Items Included
-
Sanitary Pipe Fittings - Clamp, Low Pressure
MISUMI
The fitting product line-up has become more various.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Gasket - Ferrule, Type A, GS-LC Series, Sanitary Fittings
Osaka Sanitary
ISO-compliant sanitary gasket.
Configure Now
Ships as soon as 4 Days -
Sanitary Pipe Fittings - One-Touch Clamp
MISUMI
Clamps which can be quickly assembled.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Reducer - Ferrule, RDC-2C Series, Sanitary Fittings
Osaka Sanitary
Made in Japan with inside/outside 320 - 400 buff polishing
[Features]
· Extremely small liquid penetration, dramatically reduces gasket aromatization.
· Optimal for incorporating HACCP.
· Only a small amount of material is extracted, making it appropriate for ultra clean processes.
· Retains rubberized properties even at high temperature.
· Can be sealed sufficiently even in a vapor line (operating temperature: 145°C or less).
· Features excellent sealing properties at high temperatures and also suitable for aseptic lines and aseptic systems.
· Can be used with most chemical liquids where conventional rubber is difficult to use.
· Can be used for the following types of chemical liquids without any issues.
· Ex. sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Pipe - Straight Connector, Quick Clamp Type, Sanitary Fittings
USA Sealing
Connect straight to straight runs of tubing. Made of corrosion resistant 304 Stainless Steel and highly polished on the interior for smooth finish that reduces the risk of bacteria growth and residue buildup.
- Volume Discount is available
Configure Now
Ships as soon as 10 Days -
Sanitary Pipe Fittings - Threaded Connector
MISUMI
The fitting product line-up has become more various.
- Volume Discount is available
- Lead Time Reduction
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
- New Products
Adapter - Pipe to Hose, Quick Clamp, 316 Stainless Steel, Sanitary Fittings
USA Sealing
These items connect clamp fittings to female pipe. Made of 316 Stainless Steel for excellent corrosion resistance and highly polished on the interior for smooth finish that reduces the risk of bacteria growth and residue buildup.
- Volume Discount is available
Configure Now
Ships as soon as 10 Days -
Blind Liner - LB Series, Sanitary Fittings
Consuss
Materials: SUS304, SUS316L, Nominal Diameter: 1S, 1.5S, 2S, 2.5S, 3S, 4S
· Type: FittingsConfigure Now
Ships as soon as 7 Days -
Sanitary Pipe Fittings - Nut Connector
MISUMI
The fitting product line-up has become more various.
- Volume Discount is available
- Lead Time Reduction
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Sanitary Pipe Fittings - Ferrule Cap
MISUMI
Caps for Ferrule
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Blind Ferrule - FB Series, Sanitary Fittings
Consuss
• Type: Fitting
• Fitting Shape: Cap
• Connection Type (between Equal Type/Dia. Fittings): ISO Ferrule UnionConfigure Now
Ships as soon as 4 Days -
Sanitary Pipe Fittings - Ferrule Ends, Tee
MISUMI
The fitting product line-up has become more various.
- Volume Discount is available
- Lead Time Reduction
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Adapter - Barbed Hose, Quick Clamp, 316 Stainless Steel, Sanitary Fittings
USA Sealing
Fits snugly inside the ID of flexible hose and tubing. Made of 316 Stainless Steel for excellent corrosion resistance and highly polished on the interior for smooth finish that reduces the risk of bacteria growth and residue buildup.
- Volume Discount is available
Configure Now
Ships as soon as 10 Days -
Sanitary Pipe Fittings - Welded Both Ends, 90 Degree Elbow
MISUMI
The fitting product line-up has become more various.
- Volume Discount is available
- Lead Time Reduction
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Flange Adapter - Straight, Ferrule, JFAD-C Series, Sanitary Fittings
Osaka Sanitary
Made in Japan, inside/outside 320-400 buff polishing
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Clamp - ISO Ferrule Union Fitting, CP3K Series, Sanitary Fittings
Osaka Sanitary
Sanitary clamps designed for high pressure
Configure Now
Ships as soon as 4 Days -
Sanitary Pipe Fittings - Pipe Hanger
MISUMI
The fitting product line-up has become more various.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Sanitary Adapter Fittings - Ferrule End, Hose End
MISUMI
Conversion fittings for sanitary pipes and other pipe types.
- Volume Discount is available
- Lead Time Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Sanitary Pipe Fittings - Ferrule Ends, Reducing Tees
MISUMI
The fitting product line-up has become more various.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Ferrule - Weld-on, ZFS Series, Sanitary Fittings
Fuji Special
The reliable Zett sanitary brand is widely used in the food, medical, and semiconductor industries.
Configure Now
Ships as soon as 4 Days -
Ferrule - Different Diameters, for ISO Gas Piping, FSR Series, Sanitary Fittings
Consuss
• Type: Fitting
• Fitting Shape: Straight
• Connection Type 1 Left Large Diameter Side: ISO Ferrule Union
• Connection Type 2 Right Small Diameter Side: Weld-On
• Dia., Center: Unequal Dia., ConcentricConfigure Now
Ships as soon as 7 Days -
Sanitary Pipe Fittings - Ferrule Both Ends, Elbow
MISUMI
The fitting product line-up has become more various.
- Volume Discount is available
- Lead Time Reduction
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Sanitary Pipe Fittings - Welding Liner
MISUMI
The fitting product line-up has become more various.
- Volume Discount is available
- Lead Time Reduction
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Cap - Threaded , MALB Series, Sanitary Fittings
Osaka Sanitary
[Features]
· Made in Japan with internal & external 320 ~ 400# polishingConfigure Now
Ships as soon as 10 Days -
Adapter - Hose Barb, Ferrule, HSAD-C Series, Sanitary Fittings
Osaka Sanitary
Made in Japan, inside/outside 320-400 buff polishing
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Elbow - 90 Degree, Short, Butt Weld, Polished, Sanitary Fittings
USA Sealing
Connect horizontal to vertical runs of tubing. Weld these fittings to metal tubing for a permanent and flush connection that enables maximum flow through your process line. Made of corrosion resistant 304 Stainless Steel and highly polished on the interior for smooth finish that reduces the risk of bacteria growth and residue buildup.
- Volume Discount is available
Configure Now
Ships as soon as 10 Days -
- New Products
Clamp - Wing Nut, Quick Clamp, Sanitary Fittings
USA Sealing
Use clamps to seal connections. Made of corrosion resistant 304 Stainless Steel and highly polished on the interior for smooth finish that reduces the risk of bacteria growth and residue buildup.
- Volume Discount is available
Configure Now
Ships as soon as 10 Days -
Elbow - 90 Degree, Ferrule, EL-2C Series, Sanitary Fittings
Osaka Sanitary
Convenient ferrule elbow for sanitary use
[Features]
· Secure seal at pipe connections.
· Hygienic, with zero fluid contamination.
· Highly durable against freezing and impacts.
· Features excellent workability and enables efficient piping.Configure Now
Ships as soon as Same Day Stock Items Included
-
Reducer - Ferrule, ZRC-F Series, Sanitary Fittings
Fuji Special
A type of the ISO-compliant sanitary model that has a different diameter.
Configure Now
Ships as soon as 4 Days -
- New Products
Cap - Quick-Clamp, 316 Stainless Steel, Sanitary Fittings
USA Sealing
Use these caps to seal sanitary tube and fittings. Made of 316 Stainless Steel for excellent corrosion resistance and highly polished on the interior for smooth finish that reduces the risk of bacteria growth and residue buildup.
- Volume Discount is available
Configure Now
Ships as soon as 10 Days -
Sanitary Adapter Fittings - Ferrule End, Tapped Socket
MISUMI
Conversion fittings for sanitary pipes and other pipe types.
- Volume Discount is available
- Lead Time Reduction
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Liner Cap - LNRB Series, Sanitary Fittings
Osaka Sanitary
Made in Japan, inside/outside 320-400 buff polishing
Configure Now
Ships as soon as 10 Days -
Clamp - ISO Ferrule, Union Fitting, CP2D Series, Sanitary Fittings
Osaka Sanitary
[Features]
· Supports both 8A to 15A and 1.0S to 1.5SConfigure Now
Ships as soon as 4 Days -
Blind Ferrule - for ISO Gas Piping, FB Series, Sanitary Fittings
Consuss
• Type: Fitting
• Fitting Shape: Cap
• Connection Type (between Equal Type/Dia. Fittings): ISO Ferrule Union
• Metal Piece(Fittings etc.,) Material: 304 Stainless SteelConfigure Now
Ships as soon as 7 Days -
Ferrule - Weld-on, ISO Gas Piping, FS Series, Sanitary Fittings
Consuss
• Type: Fitting
• Fitting Shape: Straight
• Connection Type 1 Left Large Diameter Side: ISO Ferrule Union
• Connection Type 2 Right Small Diameter Side: Weld-On
• Dia., Center: Equal Dia., ConcentricConfigure Now
Ships as soon as 4 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Type |
| Fitting Shape |
| Connection Type (between Equal Type/Dia. Fittings) |
| Connection Type 1 (Left or Large Diameter Side) |
| Connection Type 2 (Right or Small Diameter Side) |
| Combination of Tee & Cross at Connecting Part (A-B-C) |
| Diameter, Center |
| Metal Piece (Fittings etc.,) Material |
| Nominal Outer Diameter D Range |
| Nominal Outer Diameter D(Ø) |
| Surface Finish |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | Osaka Sanitary | MISUMI | Osaka Sanitary | Osaka Sanitary | MISUMI | MISUMI | Osaka Sanitary | MISUMI | Osaka Sanitary | MISUMI | Osaka Sanitary | MISUMI | Osaka Sanitary | USA Sealing | MISUMI | USA Sealing | Consuss | MISUMI | MISUMI | Consuss | MISUMI | USA Sealing | MISUMI | Osaka Sanitary | Osaka Sanitary | MISUMI | MISUMI | MISUMI | Fuji Special | Consuss | MISUMI | MISUMI | Osaka Sanitary | Osaka Sanitary | USA Sealing | USA Sealing | Osaka Sanitary | Fuji Special | USA Sealing | MISUMI | Osaka Sanitary | Osaka Sanitary | Consuss | Consuss |
| Product Series | Cap - RC Thread, Ferrule, Weld-on, CLF-BRC Series, Sanitary Fittings | Clamp - ISO Ferrule, Union Fitting, CP2K Series, Sanitary Fittings | Pipe - Straight Connector, Quick Clamp Type, Sanitary Fittings | Adapter - Pipe to Hose, Quick Clamp, 316 Stainless Steel, Sanitary Fittings | Adapter - Barbed Hose, Quick Clamp, 316 Stainless Steel, Sanitary Fittings | Flange Adapter - Straight, Ferrule, JFAD-C Series, Sanitary Fittings | Clamp - ISO Ferrule Union Fitting, CP3K Series, Sanitary Fittings | Ferrule - Different Diameters, for ISO Gas Piping, FSR Series, Sanitary Fittings | Adapter - Hose Barb, Ferrule, HSAD-C Series, Sanitary Fittings | Elbow - 90 Degree, Short, Butt Weld, Polished, Sanitary Fittings | Clamp - ISO Ferrule, Union Fitting, CP2D Series, Sanitary Fittings | Blind Ferrule - for ISO Gas Piping, FB Series, Sanitary Fittings | Ferrule - Weld-on, ISO Gas Piping, FS Series, Sanitary Fittings | ||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||
| Days to Ship |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 7 Days |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days | 4 Days |
Same Day Stock Items Included | 10 Days | 5 Days | 10 Days | 7 Days | 5 Days |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included | 10 Days | 5 Days | 4 Days | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 5 Days | 4 Days | 7 Days |
Same Day Stock Items Included | 5 Days | 10 Days |
Same Day Stock Items Included | 10 Days | 10 Days |
Same Day Stock Items Included | 4 Days | 10 Days | 5 Days | 10 Days | 4 Days | 7 Days | 4 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||
| Type | Fitting | Gaskets | Gaskets | Fitting | Fitting | Clamp | Fitting | Clamp | Fitting | Fitting | Clamp | Gaskets | Clamp | Fitting | Clamp | Fitting | Clamp | Fitting | Fitting | Fitting | Fitting | Fitting | Clamp | Fitting | Fitting | Clamp | Others | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Others | Clamp | Fitting | Fitting | Clamp | Fitting | Fitting | Clamp | Fitting | Fitting |
| Fitting Shape | Straight | - | - | Straight | Conversion Adaptor | - | Conversion Adaptor | - | Conversion Adaptor | Cap | - | - | - | Reducers | Straight | Straight | Straight | Cap | Nuts | Cap | Cap | Tees+B4712 | Straight | 90° | Conversion Adaptor | - | - | Conversion Adaptor | Tees+B4712 | Straight | Straight | 90° | Straight | Cap | Straight | 90° | - | 90° | Reducers | Cap | Conversion Adaptor | Cap | - | Cap | Straight |
| Connection Type (between Equal Type/Dia. Fittings) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Weld-On / Others | - | - | Weld-On | - | - | ISO Ferrule Union | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Weld-On | Others | ISO Ferrule Union | - | - | - | - | - | ISO Ferrule Union | - |
| Connection Type 1 (Left or Large Diameter Side) | ISO Ferrule Union | - | Others | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | - | ISO Ferrule Union | ISO Ferrule Union | - | Weld-On | Others | - | ISO Thread Union, Nut | ISO Ferrule Union | - | ISO Ferrule Union | Others | Weld-On | ISO Ferrule Union | ISO Ferrule Union | Others | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | ISO Ferrule Union | Weld-On | ISO Thread Union, Thread | ISO Ferrule Union | Others | Others | - | ISO Ferrule Union | Others | ISO Ferrule Union | ISO Thread Union, Liner | ISO Ferrule Union | - | ISO Ferrule Union |
| Connection Type 2 (Right or Small Diameter Side) | Weld-On | - | - | Weld-On | Pipe Threaded | - | Flange | - | Pipe Threaded | - | - | - | - | ISO Ferrule Union | - | ISO Thread Union, Thread | - | - | - | - | - | ISO Ferrule Union | - | Weld-On | Flange | - | - | Hose Adapter | ISO Ferrule Union | Weld-On | Weld-On | ISO Ferrule Union | ISO Thread Union, Liner | - | Hose Adapter | Weld-On | - | - | ISO Ferrule Union | - | Pipe Threaded | - | - | - | Weld-On |
| Combination of Tee & Cross at Connecting Part (A-B-C) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Common for All Ports | - | - | - | - | - | - | Common for All Ports | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Diameter, Center | Equal Dia., Concentric | - | - | Equal Dia., Concentric | Unequal Dia., Concentric | - | Equal Dia., Concentric | - | Equal Dia., Concentric | - | - | - | - | Unequal Dia., Concentric | - | Equal Dia., Concentric | - | - | - | - | - | Equal Dia., Concentric | - | Equal Dia., Concentric | Unequal Dia., Concentric | - | - | Unequal Dia., Concentric | Unequal Dia., Concentric | Equal Dia., Concentric | Unequal Dia., Concentric | Equal Dia., Concentric | Equal Dia., Concentric | - | Unequal Dia., Concentric | - | - | Equal Dia., Concentric | Unequal Dia., Concentric | - | Equal Dia., Concentric | - | - | - | Equal Dia., Concentric |
| Metal Piece (Fittings etc.,) Material | 304 Stainless Steel / 316L Stainless Steel | - | - | 304 Stainless Steel / 316L Stainless Steel | 316L Stainless Steel | - | 304 Stainless Steel | - | 304 Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | - | - | - | 304 Stainless Steel / 316L Stainless Steel | - | 304 Stainless Steel | - | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | - | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel | - | - | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel | 304 Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | - | - | 304 Stainless Steel / 316L Stainless Steel | 304 Stainless Steel / 316L Stainless Steel | - | 304 Stainless Steel | 316L Stainless Steel | - | 304 Stainless Steel | 304 Stainless Steel / 316L Stainless Steel |
| Nominal Outer Diameter D Range | 1.0S~2.0S / 8A~15A / 2.5S to 4S | 1.0S~2.0S / 2.5S~4.5S / 5.5S~6.5S / 8A~15A / 20A~32A / 40A~65A / 80A~200A | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | 1.0S~2.0S / 2.5S~4.5S / 5.5S~6.5S / 8A~15A / 20A~32A / 40A~65A / 80A~200A | 1.0S~2.0S / 8A~15A | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | 1.0S~2.0S | 1.0S~2.0S / 2.5S~4.5S / 5.5S~6.5S / 8A~15A / 80A~200A | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | - | 1.0S~2.0S / 2.5S~4.5S | - | 1.0S~2.0S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | - | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S / 5.5S~6.5S / 80A~200A | - | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | 1.0S~2.0S / 2.5S~4.5S | 1.0S~2.0S | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | - | - | 1.0S~2.0S / 2.5S~4.5S / 8A~15A | 1.0S~2.0S / 2.5S~4.5S | - | 1.0S~2.0S / 2.5S~4.5S | 2.5S~4.5S | 1.0S~2.0S / 2.5S~4.5S / 5.5S~6.5S / 8A~15A / 80A~200A | 20A~32A / 40A~65A / 80A~200A | 20A~32A / 40A~65A / 80A~200A |
| Nominal Outer Diameter D(Ø) | 1.0S ～ 15A | - | 1.0S ～ 15A | - | - | 1.0S ～ 4.0S | 1.0S ～ 2.5S | - | 1.0S ～ 2.0S | - | 1.0S ～ 15A | - | 1.0S ～ 2.0S | - | 1" ～ 4" | 1.0S ～ 3.0S | 1" ～ 3/4" | - | 1.0S ～ 3.0S | 1.0S ～ 3.0S | - | 1.0S ～ 15A | 1" ～ 4" | 1.0S ～ 15A | - | - | 1S ～ 3S | 1.0S ～ 3.0S | 1.5S ～ 2.5S | 1S ～ 4S | - | 1.0S ～ 15A | 1.0S ～ 3.0S | - | - | 1" ～ 4" | 1", 1-1/2" ～ 10" | - | 1.5S ～ 4S | 1", 1-1/2" ～ 10" | 1.5S ～ 3.0S | - | - | - | - |
| Surface Finish | Inner and Outer Surface Grinding | - | - | Machined Finish | Only Inner Surface Grinding | - | Only Inner Surface Grinding | - | Inner and Outer Surface Grinding | Grinding Only on External Surface | - | - | - | Inner and Outer Surface Grinding | - | - | - | - | - | Grinding Only on External Surface | - | Inner and Outer Surface Grinding | - | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | - | - | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | Machined Finish | - | Inner and Outer Surface Grinding | - | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | - | - | Inner and Outer Surface Grinding | Inner and Outer Surface Grinding | - | - | Only Inner Surface Grinding | - | - | - |
Loading...
Configure
Filters
-
Type
-
Fitting Shape
-
Connection Type (between Equal Type/Dia. Fittings)
- ISO Ferrule Union
- Weld-On
- Others
-
Connection Type 1 (Left or Large Diameter Side)
-
Connection Type 2 (Right or Small Diameter Side)
-
Combination of Tee & Cross at Connecting Part (A-B-C)
-
Diameter, Center
-
Metal Piece (Fittings etc.,) Material
-
Nominal Outer Diameter D Range
-
Metric / Inch
-
Nominal Outer Diameter D(Ø)
-
Surface Finish
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy