Days to Ship |
|
---|
SKY Packing for Hydraulic Pressure
Sakagami
The most popular packing for hydraulic cylinders. Can be used for pistons and rods. Can be installed in single grooves.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Sakagami
Prevents dust from entering from the outside to protect packings and bearings. A popular embedded dust seal for cylinders, mainly used in normal indoor atmospheres.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Sakagami
Protects packing or bearing by preventing intrusion of external dust. Fit-in type with small cross section for cylinders used mainly in normal indoor atmosphere.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Mini Y Packing for Air Pressure Use
Sakagami
Small-diameter U packing for pneumatic applications. The groove of the mini Y packing series is compatible with the O-rings of the JIS B2401-P series.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Sakagami
Protects packing or bearing by preventing intrusion of external dust. Metal ring baked type equipped by press fit in a groove. Usable under exposure to dust, earth and sand, rain water, etc.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
PS Penta Seals for Hydraulic Pressure
Sakagami
This is a rod-dedicated packing that is compatible with O-rings of the JIS B 2401 P series. This packing has better sealing properties than O-rings. Does not cause twisting or rolling damage.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Sakagami
Prevents dust from entering from the outside to protect packings and bearings. Mainly used to keep outside liquids like cutting fluid out. Rubber-coated at outer ring circumference.
Configure Now
Ships as soon as | 4 Days |
---|
Sakagami
It can also prevent dust from entering from the outside to protect the packing or bearing. Special low friction pneumatic type. Mainly used for cylinders that are used under ordinary atmospheric conditions.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Sakagami
Can also prevent dust from entering from the outside to protect the packing or bearing. Design specifically prevents water intrusion from the groove outer circumference side due to an insertion type dust seal with a large cross-sectional area .
[Features]
· 13Cr stainless steel mesh is mainly used for primary components, allowing high temperature fluids up to 350°C to be used.
· Special liquids can be handled by changing the packing, gasket or main part.
Configure Now
Ships as soon as | 8 Days |
---|
Sakagami
A piston bearing made of fiber-reinforced phenolic resin that exhibits excellent load tolerance. Prevent seizing and galling of the piston that can be integrally attached to a groove. This SW wear ring is primarily for use with hydraulic cylinders.
Configure Now
Ships as soon as | 4 Days |
---|
[Oil Pressure Use] Back-Up Ring TCS
Sakagami
Dedicated standard backup ring for use with SKY, RGY, RNY, (T)SGY, (T)SNY, and HSD. (Maximum operating pressure: approx. 21 MPa)
Configure Now
Ships as soon as | 4 Days |
---|
Sakagami
Wide range of sizes available; offers stable performance in a wide range of applications thanks to its large cross-sectional design.
Configure Now
Ships as soon as | 4 Days |
---|
Sakagami
A piston bearing made of fiber-reinforced phenolic resin that exhibits excellent load tolerance. Prevent seizing and galling of the piston that can be integrally attached to a groove. Used in low-hydraulic pressure cylinders and pneumatic cylinders.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
[Oil Pressure Use] RNY Packing
Sakagami
Packing dedicated to piston compatible with the SKY packing. Uses abrasion-resistant materials. Shape is designed to help prevent counterpressure damage.
Configure Now
Ships as soon as | 8 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
Sakagami
Seal combining an Esflon (PTFE) seal ring and synthetic rubber O-ring. Low-friction design that prevents stick-slip behavior even at low pressure and low speed.
Configure Now
Ships as soon as | 4 Days |
---|
[Air Pressure Use] GLY Packing
Sakagami
Dual use packing for pistons and rods used in pneumatic cylinders. Exclusively for use with oil-free applications; cannot be used with oil supply cylinders.
Configure Now
Ships as soon as | 8 Days |
---|
[Oil Pressure Use] NMY Packing
Sakagami
U packing exclusively for use with rods that have a small cross-sectional design; compatible with JIS B 2401 P O-rings. Produces sealing that is superior to O-rings and has excellent friction characteristics.
Configure Now
Ships as soon as | 4 Days |
---|
STK Seals for Rotary/Oscillating Motion, Hydraulic Pressure, STR Type
Sakagami
Seal combining an S-FLON (PTFE) seal ring and synthetic rubber square-ring. A low-friction seal for rotation and oscillating motion.
Configure Now
Ships as soon as | 8 Days |
---|
[Oil Pressure Use] WPB E-Sleeve
Sakagami
A multi-use piston bearing with back-up ring, for use with packings groove compatible with SKY packing. Can be mounted to an integrated groove.
Configure Now
Ships as soon as | 8 Days |
---|
[Air Pressure Use] MYP Packing / MYR Packing
Sakagami
As with mini Y packing, the groove is compatible with the O-rings of the JIS B2401-P series. The excellent friction properties provide stable sealing characteristics.
Configure Now
Ships as soon as | 4 Days |
---|
[Air Pressure Use] PNY Packing
Sakagami
Wear-resistant packing exclusively designed for rods. It maintains stable adhesion performance under conditions under conditions ranging from oil-lubricated, oil free, to dry air.
Configure Now
Ships as soon as | 4 Days |
---|
[Air Pressure Use] PSD Packing
Sakagami
Compact double pressure type packing for pistons. Cross-sectional profile designed for better friction properties than O-ring to suppress occurrence of rotation and torsion.
Configure Now
Ships as soon as | 4 Days |
---|
[Air Pressure Use] PCS Cushion Seal
Sakagami
Absorbs shock in the stroke end and prevents cylinder damage or noise. No check valve required, aiding maintenance. For use with standard air pressure cylinders.
Configure Now
Ships as soon as | 4 Days |
---|
[Oil Pressure Use] GNY Packing
Sakagami
Dedicated packing for use with rods that employs abrasion-resistant materials. Has higher cross-sectional dimensions relative to diametrical dimensions than SKY packing for increased durability, sealing properties, and eccentricity conformability.
Configure Now
Ships as soon as | 4 Days |
---|
[Oil Pressure Use] PWL Bearing
Sakagami
By using this product in combination with RGU packing, it can be integrally attached to a groove with an embedded type plastic combined backup ring / bearing.
Configure Now
Ships as soon as | 8 Days |
---|
HSD Packing for Hydraulic Pressure
Sakagami
A double pressure packing to enable thin-wall piston design. Compared to O-rings, this packing demonstrates a stable sealing performance without twisting or rolling damage.
Configure Now
Ships as soon as | 8 Days |
---|
STK Seals for Reciprocating Motion, Hydraulic Pressure, STG Type
Sakagami
Seal combining an S-FLON (PTFE) seal ring and a synthetic rubber O-ring. Low friction — does not cause static slip even at low pressure and low speed.
Configure Now
Ships as soon as | 8 Days |
---|
GPY Packing for Pneumatic Pressure
Sakagami
A dedicated packing for pistons that uses an abrasion-resistant material. The sectional dimensions for the diameter sizes are larger than the SKY packing. Highly durable to prevent causing counterpressure damage.
Configure Now
Ships as soon as | 8 Days |
---|
[Oil Pressure Use] RGY Packing
Sakagami
Packing for SKY packing-compatible pistons. Abrasion-resistant materials. Shape designed to help prevent counterpressure damage.
Configure Now
Ships as soon as | 8 Days |
---|
SWB Wear Rings for Light Loads
Sakagami
A piston bearing made of fabric-reinforced phenolic resin. Demonstrates excellent load tolerance. installs into single grooves to prevent seizing and galling of pistons. This product is mainly for use with pneumatic cylinders.
Configure Now
Ships as soon as | 4 Days |
---|
Sakagami
A coil-shaped metal scraper. Removes sputtering chips and ice adhered on the rod surface. Use in combination with rubber dust seals.
Configure Now
Ships as soon as | 4 Days |
---|
[Oil Pressure Use] Back-Up Ring, Standard TC-GPY
Sakagami
Standard backup ring dedicated to GPY packing. (Maximum operating pressure: 25 MPa)
Configure Now
Ships as soon as | 8 Days |
---|
ST Seals for Low-Friction, Low Hydraulic Pressure, STS Type
Sakagami
Seal combining an S-FLON (PTFE) seal ring and a synthetic rubber O-ring. Low friction — does not cause static slip even at low pressure and low speed.
Configure Now
Ships as soon as | 8 Days |
---|
[Air Pressure Use] PPD Packing
Sakagami
Packing designed with a focus on eccentric tracking properties and, balancing durability and friction. For dual pressure-type pistons; groove compatible with PSD packings.
Configure Now
Ships as soon as | 8 Days |
---|
[Air Pressure Use] PGY Packing
Sakagami
Wear-resistant packing exclusively designed for pistons. Maintains stable adhesion performance under conditions ranging from oil-lubricated, oil free, to dry air.
Configure Now
Ships as soon as | 4 Days |
---|
[Air Pressure Use] PPY Packing
Sakagami
Piston-dedicated packing for small-diameter cylinders, prioritizing abrasion resistance.
Configure Now
Ships as soon as | 7 Days |
---|
[Air Pressure Use] PRY Packing
Sakagami
Packing for small-diameter cylinders, focusing on abrasion resistance.
Configure Now
Ships as soon as | 8 Days |
---|
Sakagami
It can also prevent dust from entering from the outside to protect the packing or bearing. Features fiber composite duct seal and is optimal for prevention of infiltration by fiber-like dust and fine powder dust.
Configure Now
Ships as soon as | 4 Days |
---|
[Oil Pressure Use] WRB E-Sleeve
Sakagami
A multi-use piston bearing with back-up ring, for use with packings groove compatible with SKY packing. Can be mounted to an integrated groove.
Configure Now
Ships as soon as | 4 Days |
---|
Sakagami
Sealing performance equivalent to U packing is provided thanks to a unique two-pressure one-ring shape with a seal lip, and the piston component is compact.
[Features]
· Depending on the position of the equipped groove, there may be cases where equipping to an integral groove is not possible.
· Please use a split groove structure these cases.
· ΦDH9/f8 changes based on the bearing system.
· When using this product with a wear ring, please refer to the wear ring dimensions table.
Configure Now
Ships as soon as | 8 Days |
---|
[Oil Pressure Use] (Y) SNY Packing
Sakagami
Dedicated packing for use with rods which is compatible with SKY packing and grooves. Usable at temperatures of -45 to 100°C, which effectively eliminates the need for gasket replacement even in cold places in Japan and abroad.
Configure Now
Ships as soon as | 8 Days |
---|
[Oil Pressure Use] Back-Up Ring, Standard TC-GNY
Sakagami
Dedicated standard backup ring for use with GNY packing. (Maximum operating pressure: 25 MPa)
Configure Now
Ships as soon as | 8 Days |
---|
[Oil Pressure Use] Used for PG Ring (PGRO) Piston
Sakagami
Enhances the sealing function of packing by absorbing shocks to improve durability.
Configure Now
Ships as soon as | 8 Days |
---|
Copper Packing EA949YT-10B【20 Pieces Per Package】
ESCO
【Product Specifications】
・Material-Copper
・ID.xOD.xThickness-10 x 16 x 1.0
・Qty. per unit-20 pcs
Configure Now
Ships as soon as | 4 Days |
---|
Brand |
---|
Product Series |
Days to Ship |
Application |
Gasket Type |
Outer Diameter(φ) |
Inner Diameter(φ) |
Material |
Brand | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | Sakagami | ESCO |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | STK Seals for Rotary/Oscillating Motion, Hydraulic Pressure, STR Type | STK Seals for Reciprocating Motion, Hydraulic Pressure, STG Type | |||||||||||||||||||||||||||||||||||||||||||
Days to Ship |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included | 8 Days | 4 Days | 4 Days | 4 Days |
Same Day Stock Items Included | 8 Days | 4 Days | 4 Days | 8 Days | 4 Days | 8 Days | 8 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 4 Days | 4 Days | 8 Days | 8 Days | 8 Days | 4 Days | 7 Days | 8 Days | 4 Days | 4 Days | 8 Days | 8 Days | 8 Days | 8 Days | 4 Days |
Application | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | - | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Rotary Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | - | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | - | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | Reciprocating Motion | - | Reciprocating Motion | - |
Gasket Type | For Rod/Piston | Dust Seal | Dust Seal | For Rod/Piston | Dust Seal | Rod Gasket | Dust Seal | Dust Seal | Dust Seal | Piston Bearing | Back-Up Ring | For Rod/Piston | Piston Bearing | Rod Gasket | Rod Gasket | Piston Gasket | For Rod/Piston | Rod Gasket | Piston Gasket | Piston Bearing | Piston Gasket ~ Rod Gasket | Rod Gasket | Piston Gasket | Cushion Seal | Rod Gasket | Piston Bearing | Piston Gasket | Piston Gasket | Piston Gasket | Piston Gasket | Piston Bearing | Dust Seal | Back-Up Ring | Piston Gasket | Piston Gasket | Piston Gasket | Piston Gasket | Rod Gasket | Dust Seal | Rod Bearing | Piston Gasket | Rod Gasket | Back-Up Ring | Pressure Reducing Ring | - |
Outer Diameter(φ) | 20 ~ 500 | 20.5 ~ 371 | 6 ~ 110 | 6 ~ 40 | 18 ~ 225 | 6 ~ 100 | 18 ~ 62 | 24 ~ 90 | 30 ~ 180 | 30 ~ 270 | - | 16.3 ~ 670 | 20 ~ 250 | 24 ~ 200 | 10 ~ 55 | 20 ~ 380 | 28 ~ 70 | 6 ~ 36 | 50 ~ 80 | 40 ~ 180 | 6 ~ 24 | 26 ~ 70 | 10 ~ 125 | 18 ~ 97 | 26 ~ 180 | 40 ~ 100 | 20 ~ 80 | 65 ~ 225 | 40 ~ 180 | 40 ~ 200 | 20 ~ 180 | 20.3 ~ 108 | - | 20 ~ 100 | 10 ~ 125 | 25 ~ 40 | 8 ~ 32 | 14 | 24/22 ~ 28/26 | 26 ~ 115 | 40 ~ 90 | 33 ~ 100 | - | 80 | - |
Inner Diameter(φ) | 12.5 ~ 480 | 12.5 ~ 355 | 3 ~ 100 | 3 ~ 34 | 8 ~ 200 | 3 ~ 90 | 8 ~ 50 | 16 ~ 80 | 18 ~ 160 | 26 ~ 262 | - | 6.3 ~ 630 | 17 ~ 244 | 16 ~ 180 | 6 ~ 45 | 14 ~ 360 | 20 ~ 60 | 3 ~ 30 | 40 ~ 70 | 30 ~ 165 | 3 ~ 20 | 18 ~ 60 | 5.4 ~ 110 | 10 ~ 85 | 18 ~ 160 | 30 ~ 85 | 14 ~ 65 | 52 ~ 201 | 30 ~ 155 | 30 ~ 180 | 17 ~ 176 | 16 ~ 100 | - | 15 ~ 90.5 | 5.4 ~ 110 | 17 ~ 30 | 4 ~ 24 | 10 | 16 ~ 20 | 18 ~ 100 | 30 ~ 77 | 25 ~ 85 | - | 72 | - |
Material | Fluorine Rubber ~ Nitrile Rubber | Fluorine Rubber ~ Nitrile Rubber | Fluorine Rubber ~ Nitrile Rubber | Fluorine Rubber ~ Special Compounded Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Fluorine Rubber ~ Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Cloth Inserted Phenol | PTFE | Nitrile Rubber | Cloth Inserted Phenol | Nitrile Rubber | Fluorine Rubber ~ Nitrile Rubber | PTFE | Fluorine Rubber | Nitrile Rubber | PTFE | Polyamide | Nitrile Rubber | Nitrile Rubber | Fluorine Rubber ~ Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Polyamide | Nitrile Rubber | PTFE | Nitrile Rubber | Nitrile Rubber | Cloth Inserted Phenol | Metal | - | PTFE | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Polyester | Polyamide | Nitrile Rubber | Nitrile Rubber | - | PTFE | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy