MenuClose
Check Valves
| Days to Ship |
|
|---|
-
Check Valve - Nipple Fitting, Male BSPT to Male BSPT, AT Series
Asoh
•Type : Spring Type (In-line)
•Material : 316 Stainless Steel, 3604BD
•Applicable Fluid : Air, Water
For complete product overview and details on A-Check Nipple Type see the sections below:Configure Now
Ships as soon as 4 Days -
MISUMI
•Type : Swing type
•Material : SCS13
•Applicable Fluid : Water, Air, Oil
For complete product overview and details on Check Valves see the sections below:- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Bronze General-Purpose 125 Type Swing Check Valve Screwing
Kitz
•Type : Swing type
•Material : Bronze
•Applicable Fluid : Water
For complete product overview and details on Bronze General-Purpose 125 Type Swing Check Valve Screwing see the sections below:Configure Now
Ships as soon as 4 Days -
Bronze General-Purpose 125 Type Y Shaped Swing Check Valve Screw-in
Kitz
•Type : Swing type
•Material : Bronze
•Applicable Fluid : Water
For complete product overview and details on Bronze General-Purpose 125 Type Y Shaped Swing Check Valve Screw-in see the sections below:Configure Now
Ships as soon as 22 Days -
150 E Type - Bronze Screw-in Type Lift Check Valve
Toyo Valve
A valve that is very safe for use in corrosive environments.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Inline Check Valve for Steam or Water - CVC3 Series
Miyawaki
•Type : Spring Type (In-line)
•Material : SCS13A
•Applicable Fluid : Water
For complete product overview and details on Check Valve (Inline Check) [for Steam - Hot and Cold Water] - CVC3 see the sections below:Configure Now
Ships as soon as Same Day Stock Items Included
-
JIS 10K Type - Cast Iron F Type Swing Check Valve (JIS B 2031)
Toyo Valve
A FC200 main body material cast iron F type swing check valve.
[Features]
· Suppresses water hammer increasing the disc closing speed and improves the sealing performance by setting the counterweight in the Closed moment position.
· The opening and closing of the disc is performed more smoothly and the flow of the low-voltage fluid is accelerated by setting the counterweight in the Open moment position and maintaining the balance with the disc.
· The inner structure of the swing check valve with a counterweight is simpler compared to other shock absorbing reverse valves. Therefore, there are fewer blockages caused by contaminants.
· The swing check valve with a counterweight enables both horizontal and vertical pipe connections.- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Check Valves - Hydraulic, for Oil
MISUMI
•Type : Spring (In-line)
•Material : Steel
•Applicable Fluid : Oil
For complete product overview and details on Check Valve - Oil Hydraulic see the sections below:- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
General Purpose Bronze 10K Lift Check Valve Screw-in
Kitz
• Compatible Fluid: Water
• Type: Lift type
• Nominal Pressure: 10K
• Material: Bronze
• Supply Side Connection Type: RcConfigure Now
Ships as soon as 4 Days -
Bronze JIS-Standard 10K Swing Check Valve Screw-in
Kitz
[Features]
· Secure seal at pipe connections.
· Hygienic, with zero fluid contamination.
· Highly durable against freezing and impacts.
· Features excellent workability and enables efficient piping.Configure Now
Ships as soon as 4 Days -
Malleable Valve, General-Purpose 10K Type, Check Valve (Inline) Screw-in
Hitachi Valve
An economical and strong malleable valve. The main parts are made from stainless steel for better abrasion resistance compared to bronze valves. Optimal for steel pipes. Resists corrosion caused by differences in contact potentials.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
10 K - Bronze Screw-in Type Swing Check Valve (Metal Sheet) (JIS B 2011), New JIS Mark Displayed
Toyo Valve
A valve that is safe for use in corrosive environments.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
10K-Type Cast Iron Wing Check Valve
Toyo Valve
Lead-free copper alloy to provide safe water. Used for water and hot-water supply.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
Class 10 K - Screw-in Type Swing Check Valve
Toyo Valve
Stainless steel valve, U series. For general-purpose and construction equipment.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Swing Check Valve - Threaded, NPT Female, 304 Stainless Steel, Class 125
USA Sealing
Check valves open to allow or prevent flow, and prevents backflow. Large body is designed for high-flow applications. 304 stainless steel offers good corrosion resistance.
- Volume Discount is available
Configure Now
Ships as soon as 10 Days -
Stainless Steel General-Purpose 10K Swing Check (SCS13A) Valve Flange
Kitz
•Type : Swing type
•Material : CF-8 Stainless Steel Cast
•Applicable Fluid : Air, Gas, Oil, Water
For complete product overview and details on Stainless Steel General-Purpose 10K Swing Check (SCS13A) Valve Flange see the sections below:Configure Now
Ships as soon as 4 Days -
Check Valve - Nipple Fitting, Female BSPT to Female BSPT, AS Series
Asoh
•Type : Spring Type (In-line)
•Material : 316 Stainless Steel, 3604BD
•Applicable Fluid : Air, Water
For complete product overview and details on A-Check Nipple Type see the sections below:Configure Now
Ships as soon as 4 Days -
General Purpose Bronze150-Type Lift Check Screw Valve
Kitz
A bronze, threaded, general-purpose 150 type lift check valve—manufactured by Kitz Corporation, with a track record in Japan for top-class quality screw fittings/pipe components.
· Material: bronze iron
· Type: lift
· Working fluid: waterConfigure Now
Ships as soon as 4 Days -
Koyo
Cadmium-free brass material is used.
[Features]
· A fitting with an integrated fitting and check valve.
· A useful fitting for saving on spaces and costs.
· The spring poppet check valve provides flow direction to the piping system- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Malleable Valve, General-Purpose 10K Type, Check Valve (Lift Type) Screw-in
Hitachi Valve
An economical and strong malleable valve. The main parts are made from stainless steel for better abrasion resistance compared to bronze valves. Optimal for steel pipes. Resists corrosion caused by differences in contact potentials.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Stainless Steel Swing Check Valve, SVC Type, SVC2 Type
ONDASEISAKUSYO
Made from Austenitic stainless steel for optimal corrosion resistance. Make sure assembly is performed after confirming water flow direction and mounting position.
Configure Now
Ships as soon as 4 Days -
125 Type - Bronze Screw-in Type Swing Check Valve
Toyo Valve
A valve that is safe for use in corrosive environments.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Ishizaki
[Features]
· Standard model that can be manufactured with ductile or bronze in addition to cast iron.
· Lineup includes a wide range from 10K to 63K.
· SCS13 material, which is durable, is used for valve rods, valve bodies, upper and lower guides and valve seats for 10K 40A to 150A.Configure Now
Ships as soon as 5 Days -
General Purpose Ductile Iron 10K Lift Check Valve Flange
Kitz
[Features]
· The ductile cast iron product (FCD-S) is a cast iron product that passes JIS B8270 Appendix 5-A and the standard specified by METI Public Notice No. 16 1975.8.1 (Revision, March 24, 1997 Notice No. 137) Article 4-7, Note 1, and its material is regulated specially for high pressure gas facilities, pressure containers, etc. which are different from cast iron products regulated by JISG5502 Standard for Ductile Iron (FCD400-15, etc.).
· Cast with the following chemical composition, mechanical properties and micro structure as defined in the official notice of JIS and METI for ductile iron castings (FCD-S), making it suitable for use in high pressure gas equipment or pressure vessels.Configure Now
Ships as soon as 5 Days -
Stainless Steel General-Purpose 10K Swing Check (SCS14A) Valve Screw-in
Kitz
•Type : Swing type
•Material : CF-8M Stainless Steel Cast
•Applicable Fluid : Air, Gas, Oil, Water
For complete product overview and details on Stainless Steel General-Purpose 10K Swing Check (SCS14A) Valve Screw-in see the sections below:Configure Now
Ships as soon as 5 Days -
General Purpose Ductile Iron 20K Lift Check Valve Flange
Kitz
•Type : Lift type
•Material : Ductile Cast Iron
•Applicable Fluid : Air, Gas, Oil, Water
For complete product overview and details on General Purpose Ductile Iron 20K Lift Check Valve Flange see the sections below:Configure Now
Ships as soon as 5 Days -
Koyo
Cadmium-free brass material is used.
[Features]
· Complete fitting with a joint and a check valve.
· Advantageous fitting for the space and cost perspectives.
· The spring poppet check valve gives the flow direction to the piping system- Volume Discount is available
Configure Now
Ships as soon as 22 Days -
125H Model Bronze Screw-in Type Swing Check Valve
Toyo Valve
A valve that is safe for use in corrosive environments.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Ishizaki
[Features]
· Nylon-coated product suitable for water lines used for washing facilities and high-floor construction, etc.
· JWWA Certified and Registered product.
· SCS13 material, which is durable, is used for valve rods, valve bodies, upper and lower guides, and valve seats for 10K 40A to 150A.Configure Now
Ships as soon as 5 Days -
ESCO
【Product Specifications】
・Operating pressure-4.9MPa (50kgf/cm2)
・Material-Brass
・Cracking pressure-6.8kPa (0.07kg/cm2)
・Thread (PT)…1/4Configure Now
Ships as soon as 4 Days -
General Purpose Ductile Iron 10K Swing Check Valve Flange
Kitz
A ductile iron, general-purpose 10K swing check valve flange—manufactured by Kitz Corporation, with a track record in Japan for top-class quality screw fittings/pipe components.
· Material: ductile iron
· Type: swing
· Working fluid: water, air, oil, gasConfigure Now
Ships as soon as 5 Days -
General Purpose Ductile Iron 20K Lift Check Valve Screw-in
Kitz
A 20K ductile iron, threaded, general-purpose lift check valve—manufactured by Kitz Corporation, with a track record in Japan for top-class quality screw fittings/pipe components.
· Material: ductile iron
· Type: swing
· Working fluid: water, air, oil, gasConfigure Now
Ships as soon as 5 Days -
General Purpose Ductile Iron 10K Lift Check Valve Screw-in
Kitz
A general purpose ductile iron 10K lift check valve screw-in from Kitz with Japan's top-class quality and experience in the field of screw fittings and parts for tubing.
· Materials: ductile cast iron
· Type: Swing
· Working fluid: water, air, oil, gasConfigure Now
Ships as soon as 4 Days -
General Purpose Ductile Iron 20K Swing Check Valve Flange
Kitz
[Features]
· The ductile cast iron product (FCD-S) is a cast iron product that passes JIS B8270 Appendix 5-A and the standard specified by METI Public Notice No. 16 1975.8.1 (Revision, March 24, 1997 Notice No. 137) Article 4-7, Note 1, and its material is regulated specially for high pressure gas facilities, pressure containers, etc. which are different from cast iron products regulated by JISG5502 Standard for Ductile Iron (FCD400-15, etc.).
· Cast with the following chemical composition, mechanical properties and micro structure as defined in the official notice of JIS and METI for ductile iron castings (FCD-S), making it suitable for use in high pressure gas equipment or pressure vessels.Configure Now
Ships as soon as 5 Days -
Stainless Steel General-Purpose 10K Swing Check (SCS13A) Valve Screw-in
Kitz
[Features]
· JIS B 2011 bronze valve applied to solve problems of insufficient strength and corrosion resistance in bronze and ductile iron manufacturing.
· High-quality, durable flange type and screw-in type stainless steel valves which conform to Public Construction Work Standard Specification (Machine Facility Work) and Japan Stainless Steel Association SAS358 Standard as countermeasures for rusty tap water.Configure Now
Ships as soon as 4 Days -
Bronze General Purpose 10K Swing Check Valve Flange
Kitz
• Max. Operating Pressure (mpa): 1.4
• Type: Swing type
• Nominal Pressure: 10K
• Material: Bronze
• Supply Side Connection Type: FlangeConfigure Now
Ships as soon as 5 Days -
Malleable Valve, General-Purpose 10K Type, Check Valve (Swing Type), Screwed
Hitachi Valve
An economical and robust malleable valve. Main parts are mostly stainless steel for better abrasion resistance than bronze valves. Ideal for iron pipes. Helps eliminate corrosion caused by contact potential difference.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
16K Type Ductile Cast-Iron Screw Down Lift Check Valve Union Bonnet Type
Toyo Valve
A tough valve resistant to heat, corrosion abrasion resistance. Use in areas with vapor, hot water, and embedded lines where safety is a priority.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
J10K Lead Free Bronze Screw Down Swing Check Valve (Metal Sheet) (JIS B 2011) New JIS Mark Displayed
Toyo Valve
Lead-free copper alloy to provide safe water. Used for water and hot-water supply.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
ESCO
【Product Specifications】
・Product in conformity with JIS Standard
・Material-Bronze (body)
・Max pressure-Oil, gas, air, pulsating water (120℃ or below),saturated steam： 0.98MPa (10kgf/cm2), Still water (120℃ or below)： 1.37MPa (14kgf/cm2)
・Thread (PT)…3/4Configure Now
Ships as soon as 4 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Type |
| Compatible Fluid |
| Nominal Pressure |
| Material |
| Supply Side Connection Type |
| Supply Side Plumbing Thread Nominal |
| Supply Side Tube Flange Nominal |
| Control Side Connection Type |
| Control Side Plumbing Thread Nominal |
| Control Side Tube Flange Nominal |
| Maximum Operating Pressure(MPa) |
| Cracking Pressure(MPa) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Asoh | MISUMI | Kitz | Kitz | Toyo Valve | Miyawaki | Toyo Valve | MISUMI | Kitz | Kitz | Hitachi Valve | Toyo Valve | Toyo Valve | Toyo Valve | USA Sealing | Kitz | Asoh | Kitz | Koyo | Hitachi Valve | ONDASEISAKUSYO | Toyo Valve | Ishizaki | Kitz | Kitz | Kitz | Koyo | Toyo Valve | Ishizaki | ESCO | Kitz | Kitz | Kitz | Kitz | Kitz | Kitz | Hitachi Valve | Toyo Valve | Toyo Valve | ESCO |
| Product Series | Check Valve - Nipple Fitting, Male BSPT to Male BSPT, AT Series | Bronze General-Purpose 125 Type Y Shaped Swing Check Valve Screw-in | JIS 10K Type - Cast Iron F Type Swing Check Valve (JIS B 2031) | Malleable Valve, General-Purpose 10K Type, Check Valve (Inline) Screw-in | 10 K - Bronze Screw-in Type Swing Check Valve (Metal Sheet) (JIS B 2011), New JIS Mark Displayed | Swing Check Valve - Threaded, NPT Female, 304 Stainless Steel, Class 125 | Stainless Steel General-Purpose 10K Swing Check (SCS13A) Valve Flange | Check Valve - Nipple Fitting, Female BSPT to Female BSPT, AS Series | Malleable Valve, General-Purpose 10K Type, Check Valve (Lift Type) Screw-in | Stainless Steel General-Purpose 10K Swing Check (SCS14A) Valve Screw-in | Stainless Steel General-Purpose 10K Swing Check (SCS13A) Valve Screw-in | Malleable Valve, General-Purpose 10K Type, Check Valve (Swing Type), Screwed | 16K Type Ductile Cast-Iron Screw Down Lift Check Valve Union Bonnet Type | J10K Lead Free Bronze Screw Down Swing Check Valve (Metal Sheet) (JIS B 2011) New JIS Mark Displayed | ||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||
| Days to Ship | 4 Days | 4 Days | 4 Days | 22 Days | 5 Days |
Same Day Stock Items Included | 5 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days | 4 Days | 10 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days | 5 Days | 5 Days | 5 Days | 22 Days | 4 Days | 5 Days | 4 Days | 5 Days | 5 Days | 4 Days | 5 Days | 4 Days | 5 Days | 4 Days | 5 Days | 5 Days | 4 Days |
| Specifications |
|
| ||||||||||||||||||||||||||||||||||||||
| Type | Spring Type (In-line) | Swing Type | Swing Type | Swing Type | Lift Type | Spring Type (In-line) | Swing Type | Spring Type (In-line) | Lift Type | Swing Type | Spring Type (In-line) | Swing Type | Wafer Type | Swing Type | Swing Type | Swing Type | Spring Type (In-line) | Lift Type | Spring Type (In-line) | Lift Type | Swing Type | Swing Type | Others | Lift Type | Swing Type | Lift Type | Spring Type (In-line) | Swing Type | Others | - | Swing Type | Lift Type | Lift Type | Swing Type | Swing Type | Swing Type | Swing Type | Lift Type | Swing Type | - |
| Compatible Fluid | Water / Air | Water / Air / Oil | Water | Water | Water / Others | Water | Water / Oil / Others | Oil | Water | Water / Air / Oil / Gas | Water / Air / Oil | Water | Water / Air / Oil | Water / Air / Oil / Gas / Others | Water / Air / Oil | Water / Air / Oil / Gas | Water / Air | Water | Air | Water / Air / Oil | Water / Oil | Water / Others | Water | Water / Air / Oil / Gas | Water / Air / Oil / Gas | Water / Air / Oil / Gas | Air | Water / Others | Water | - | Water / Air / Oil / Gas | Water / Air / Oil / Gas | Water / Air / Oil / Gas | Water / Air / Oil / Gas | Water / Air / Oil / Gas | Water / Air / Oil / Gas | Water / Air / Oil | Water / Air / Oil / Gas | Water | - |
| Nominal Pressure | No Standard, Others | - | 125 | 125 | 150 | No Standard, Others | 10K | - | 10K | 10K | 10K | 10K | 10K | 10K | 200 | 10K | No Standard, Others | 150 | No Standard, Others | 10K | 200 | 125 | 10K | 10K | 10K | 20K | No Standard, Others | 125 | 10K | - | 10K | 20K | 10K | 20K | 10K | 10K | 10K | 16K | 10K | - |
| Material | Brass ～ Stainless Steel | Stainless Steel Cast | Bronze | Bronze | Bronze | Stainless Steel Cast | Ductile Cast Iron | Steel | Bronze | Bronze | Bronze | Bronze | Cast Iron | Stainless Steel | Stainless Steel | Stainless Steel Cast | Brass ～ Stainless Steel | Bronze | Brass | Cast Iron | Stainless Steel Cast | Bronze | Cast Iron | Ductile Cast Iron | Stainless Steel Cast | Ductile Cast Iron | Brass | Bronze | Cast Iron | - | Ductile Cast Iron | Ductile Cast Iron | Ductile Cast Iron | Ductile Cast Iron | Stainless Steel Cast | Bronze | Cast Iron | Ductile Cast Iron | Lead-free Copper Alloy | - |
| Supply Side Connection Type | Rc (R) | Rc (R) | Rc (R) | Rc (R) | Rc (R) | Rc (R) | Flange | Rc (R) | Rc (R) | Rc (R) | Rc (R) | Rc (R) | Flange | Rc (R) | - | Flange | Rc (R) | Rc (R) | Rc (R) | Rc (R) | Rc (R) | Rc (R) | Flange | Flange | Rc (R) | Flange | Rc (R) | Rc (R) | Flange | - | Flange | Rc (R) | Rc (R) | Flange | Rc (R) | Flange | Rc (R) | Rc (R) | Rc (R) | - |
| Supply Side Plumbing Thread Nominal | 1/2B ～ 3/8B | 1B ～ 3/4B | 1B ～ 4B | 1B | 1B ～ 3/8B | 1B ～ 3/4B | - | 1/2B ～ 3/8B | 1B ～ 3/4B | 1B ～ 3/8B | 1B ～ 3/4B | 1B ～ 3/8B | - | 1 1/2B ～ 3/4B | - | - | 1/2B ～ 3/8B | 1B ～ 3/8B | 1/4B ～ 1/8 | 1B ～ 3/4B | 1B ～ 3/4B | 1B ～ 3/8B | - | - | 1B ～ 1/2B | - | 1/4B | 1B ～ 3/8B | - | - | - | 1B ～ 3/4B | 1B ～ 3/4B | - | 1B ～ 3/4B | - | 1B ～ 3/4B | 1B ～ 3/4B | 1B ～ 3/4B | - |
| Supply Side Tube Flange Nominal | - | - | - | - | - | - | 1 1/2B ～ 8B | - | - | - | - | - | 1 1/2B ～ 10B | - | - | 1B ～ 3/4B | - | - | - | - | - | - | 1 1/2B ～ 6B | 1B ～ 3/4B | - | 1B ～ 3/4B | - | - | 1 1/2B ～ 10B | - | 1 1/2B ～ 6B | - | - | 3B ～ 4B | - | 1B ～ 3/4B | - | - | - | - |
| Control Side Connection Type | Rc (R) | - | Rc (R) | Rc (R) | Rc (R) | Rc (R) | Flange | - | Rc (R) | Rc (R) | Rc (R) | - | Flange | Rc (R) | - | Flange | Rc (R) | Rc (R) | Rc (R) | Rc (R) | Rc (R) | Rc (R) | Flange | Flange | Rc (R) | Flange | Rc (R) | - | Flange | - | Flange | Rc (R) | Rc (R) | Flange | Rc (R) | Flange | Rc (R) | Rc (R) | Rc (R) | - |
| Control Side Plumbing Thread Nominal | 1/2B ～ 3/8B | - | 1B ～ 4B | 1B | 1B ～ 3/8B | 1B ～ 3/4B | - | - | 1B ～ 3/4B | 1B ～ 3/8B | 1B ～ 3/4B | 1B ～ 3/8B | - | 1 1/2B ～ 3/4B | - | - | 1/2B ～ 3/8B | 1B ～ 3/8B | 1/4B ～ 1/8B | 1B ～ 3/4B | 1B ～ 3/4B | 1B ～ 3/8B | - | - | 1B ～ 1/2B | - | 1/4B | 1B ～ 3/8B | - | - | - | 1B ～ 3/4B | 1B ～ 3/4B | - | 1B ～ 3/4B | - | 1B ～ 3/4B | 1B ～ 3/4B | 1B ～ 3/4B | - |
| Control Side Tube Flange Nominal | - | - | - | - | - | - | 1 1/2B ～ 8B | - | - | - | - | - | 1 1/2B ～ 10B | - | - | 1B ～ 3/4B | - | - | - | - | - | - | 1 1/2B ～ 6B | 1B ～ 3/4B | - | 1B ～ 3/4B | - | - | 1 1/2B ～ 10B | - | 1 1/2B ～ 6B | - | - | 3B ～ 4B | - | 1B ～ 3/4B | - | - | - | - |
| Maximum Operating Pressure(MPa) | 2 | - | 1.18 | 1.18 | 1.6 | 2.1 | 1.4 | - | 1.37 ～ 1.4 | 1.4 | 1.37 | 1.4 | 1.4 | 1 | - | 1.4 | 2 | 1.37 ～ 1.6 | 21 | 1.37 | - | 1.2 | 0.98 | 1.4 | 1.4 | 2.75 | 21 | 1.2 | 0.98 | - | 1.4 | 2.75 | 1.37 | 2.75 | 1.4 | 1.4 | 1.37 | 2.2 | 1.4 | - |
| Cracking Pressure(MPa) | 0.007 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.007 | - | 0.05 | - | - | - | - | - | - | - | 0.05 ～ 0.3 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Filters
-
Type
-
Compatible Fluid
-
Nominal Pressure
- 10K
- 16K
- 20K
- 125
- 150
- 200
- No Standard, Others
-
Material
-
Supply Side Connection Type
-
Supply Side Plumbing Thread Nominal
-
Supply Side Tube Flange Nominal
-
Control Side Connection Type
-
Control Side Plumbing Thread Nominal
-
Control Side Tube Flange Nominal
-
Metric / Inch
-
Maximum Operating Pressure(MPa)
-
Cracking Pressure(MPa)
Brand
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy