MenuClose
Inserts（Sale Unit：Low Quantity Available beginning with 1 pc.）
Select a subcategory
| Days to Ship |
|
|---|
-
Inserts - Threaded, Slotted, Self-Tapping
MISUMI
• Operating Environment: Manufacturing Equipment
• Application: Light Metal- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Inserts - Press Fit, Brass, Cadmium-Free, Flanged Bit Insert
Tokai
General purpose type. Low cost and well balanced.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded, Stainless Steel, Coarse
MISUMI
• Operating Environment: Manufacturing Equipment
• Application: Light Metal
• Material: 304 Stainless Steel
• Screw Type: Metric (fine) Thread- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 2/4
Tokai
These inserts are the best choice for easy and secure fitment into plastic holes.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 302
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Configure Now
Ships as soon as Same Day Stock Items Included
-
Inserts - Recoil Threaded, Nitronic 60
Recoil
Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Tangless Insert Installation and Removal Tools
MISUMI
• Category: Tool
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Inserts - Press Fit, Flanged, Brass, HFB
Hirosugi-Keiki
[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingConfigure Now
Ships as soon as 17 Days -
Inserts - Self Tapping, Three Hole, Short, Type 308
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Inserts - Recoil Threaded, Phosphor Bronze
Recoil
Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 6 Days -
Inserts - Threaded, Stainless Steel, E-Sert
Precision Tsugami
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded Insert Installation Tool, Self-Tapping
MISUMI
• Category: Tool
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Inserts - Recoil Free Running Thread, Stainless Steel, Inch Coarse
Recoil
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Self Tapping, Three Hole, Short, Type 307
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Configure Now
Ships as soon as 4 Days -
Ensat Expanded Slot Type, Model 302, Inch Type
KKV
[Features]
· Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
· The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
· If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.
[Materials]
SUM22L free-cutting steel (equivalent), hexavalent chromateConfigure Now
Ships as soon as 4 Days -
Inserts - Ensat Manual Machining Tool, Type 610
KKV
• Category: Tool
• Sale Unit: Low Quantity Available beginning with 1 pc.
• Material: Iron
• Screw Type: Metric (coarse) ThreadConfigure Now
Ships as soon as 4 Days -
Inserts - Threaded Insert Installation Tool, Black Oxide Finish
MISUMI
• Category: Tool
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Recoil Tangless Insert (Nitronic 60)
Recoil
Tangless insert that does not require lubricant oil.
[Features]
·Dedicated tools enable the insertion and extraction without tongues
·Extraction will not damage the male threads nor the product
·No need to break off the tongues, look for the broken tongues, or check with gauges
·Prevents screw galling (seizure) up to 425°C
[Applications]
·Applicable in a wide range of industries such as liquid crystal and semiconductor related products- Volume Discount is available
Configure Now
Ships as soon as 5 Days -
Inserts - Recoil Threaded, Stainless Steel
Recoil
An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded Insert Removal Tool, Carbon Steel
MISUMI
• Category: Tool
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Japan Drive It
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Tangless, Threaded, Stainless Steel
MISUMI
Revised Screw Insert. No Need of Breaking Tongue after Insertion. Easy Extraction with a specified tool. Facilitates Insert Operation compared with conventional products.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Inserts - Threaded, Stainless Steel, Phosphor Bronze
Nippon Sprew
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Press Fit, Brass, Cadmium-Free, SB (Z) Type
Tokai
General purpose type. Low cost and well balanced.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Recoil Free Running Thread, Stainless Steel, Locking
Recoil
Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Tapping Tools for Threaded Inserts
MISUMI
• Category: Tool
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Inserts - Self Tapping, Ultra Coarse, Type 309
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Configure Now
Ships as soon as 4 Days -
Inserts - Self Tapping, Chip-Free, Short, Type 337
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded, Inch Coarse
Nippon Sprew
Screw reinforcer featuring coiling of a diamond shaped stainless steel thread. Can achieve high-reliability tightening by using the springback skillfully.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded, Non-Locking
Sel Japan
Optimal nut for preventing looseness of vibrating parts, etc. For mounting, press in and tighten with a normal screwdriver. No special tools required.
Configure Now
Ships as soon as 4 Days -
Inserts - Recoil Free Running Thread, Stainless Steel, Metric
Recoil
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Tapping Tools for Tangless Inserts
MISUMI
• Category: Tool
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Sel Japan
Able to obtain high retention force. Reduces work hours and costs drastically, and eliminates pitching shift during assembly.
Configure Now
Ships as soon as 4 Days -
Nippon Sprew
Screw reinforcer featuring a coiled, diamond-shaped stainless steel thread. Can achieve high-reliability tightening by effective use of the the springback.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Tangless, Stainless Steel
Recoil
• Category: Tangless
• Sale Unit: Low Quantity Available beginning with 1 pc.
• Application: Light Metal
• Material: Stainless steel (SUS303 / SUS304)
• Screw Type: Metric (coarse) Thread- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 303
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Configure Now
Ships as soon as 4 Days -
Inserts - Self Tapping, Brass, Type 305
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Configure Now
Ships as soon as 4 Days -
Japan Drive It
[Type] Press Fit Use
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded, Metric Fine
Nippon Sprew
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Inserts - Self Tapping, Three Hole, Type 308
Sunco
[Nominal M] 16
[Material] Stainless Steel
[Surface Processing] NoneConfigure Now
Ships as soon as 4 Days -
Inserts - Press Fit, Brass, Cadmium-Free, Flanged
Tokai
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
Configure Now
Ships as soon as 4 Days -
Inserts - Recoil Free Running Thread, Stainless Steel, with Notch, Metric
Recoil
Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Category |
| Application |
| Material |
| Screw Type |
| Thread Diameter (Inserted) - Metric |
| Thread Diameter (Inserted) - Inch |
| Length (After Insertion) L (D = Screw Shaft Dia. M) |
| Notch |
| Shape |
| Sale Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | Tokai | MISUMI | Tokai | KKV | Recoil | MISUMI | Hirosugi-Keiki | KKV | Recoil | Recoil | NBK | Precision Tsugami | MISUMI | Recoil | KKV | KKV | KKV | MISUMI | Recoil | Recoil | MISUMI | Japan Drive It | MISUMI | Nippon Sprew | Tokai | Recoil | MISUMI | KKV | KKV | Nippon Sprew | Sel Japan | Recoil | MISUMI | Sel Japan | Nippon Sprew | Recoil | KKV | KKV | Japan Drive It | Nippon Sprew | Recoil | Sunco | Tokai | Recoil |
| Product Series | Inserts - Press Fit, Brass, Cadmium-Free, Flanged Bit Insert | Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 302 | Inserts - Recoil Free Running Thread, Stainless Steel, Inch Coarse | Inserts - Threaded Insert Installation Tool, Black Oxide Finish | Inserts - Recoil Free Running Thread, Stainless Steel, Locking | Inserts - Recoil Free Running Thread, Stainless Steel, Metric | Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 303 | Inserts - Trade Series Recoil Thread Repair Kit, Inch Coarse | Inserts - Recoil Free Running Thread, Stainless Steel, with Notch, Metric | ||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||
| Days to Ship |
Same Day
Stock Items Included | 4 Days |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included | 4 Days | 4 Days | 17 Days | 4 Days | 4 Days | 4 Days | 6 Days | 4 Days |
Same Day Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days |
Same Day Stock Items Included | 5 Days | 4 Days | 4 Days | 4 Days |
Same Day
Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Specifications |
|
|
| ||||||||||||||||||||||||||||||||||||||||||
| Category | Self-Tapping | Standard | Standard | Standard | Self-Tapping | Standard | Tool | Press Fitting | Self-Tapping | Tool | Standard | Key Locked | Standard | Tool | Standard | Self-Tapping | Self-Tapping | Tool | Tool | Tangless | Standard | Tool | Press Fitting | Tangless | Standard | Standard | Standard | Tool | Self-Tapping | Self-Tapping | Standard | Crimped | Standard | Tool | Crimped | Standard | Tangless | Self-Tapping | Self-Tapping | Press Fitting | Standard | Tool | Self-Tapping | Standard | Standard |
| Application | Light Metal | General Resin | Light Metal / Cast Iron / General Resin | General Resin | - | Light Metal | Light Metal | Light Metal | - | - | Light Metal | Light Metal / Cast Iron / General Resin / Wood | Light Metal / Cast Iron / General Resin | - | Light Metal | - | - | - | Light Metal / Cast Iron / General Resin | Light Metal | Light Metal | Light Metal / Cast Iron / General Resin | - | Light Metal | Light Metal | General Resin | Light Metal | Light Metal / Cast Iron / General Resin | - | - | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal | - | - | General Resin | Light Metal | - | - | General Resin | Light Metal |
| Material | Steel / Stainless steel (SUS303 / SUS304) | Brass | Stainless steel (SUS303 / SUS304) | Brass | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel / Brass | Nitronic 60 | - | Brass | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | Stainless steel (SUS303 / SUS304) | Phosphor Bronze | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | - | Stainless steel (SUS303 / SUS304) | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | Steel | Steel | - | Nitronic 60 | 316 Stainless Steel | - | Brass | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) / Phosphor Bronze | Brass | Stainless steel (SUS303 / SUS304) | - | Stainless steel (SUS303 / SUS304) / Brass | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | - | Steel / Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Steel | Brass | Brass | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Brass | Stainless steel (SUS303 / SUS304) |
| Screw Type | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread / Metric (fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | - | Metric (coarse) Thread | Metric (coarse) Thread | - | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | - | Unify (coarse) Thread | Metric (coarse) Thread | Unify (coarse) Thread / Whitworth (Coarse) Screw | Metric (coarse) Thread | Metric (coarse) Thread / Metric (fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | - | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | - | Metric (coarse) Thread | Metric (coarse) Thread | Unify (coarse) Thread | Metric (coarse) Thread | Metric (fine) Thread | - | Metric (coarse) Thread | Unify (Fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (fine) Thread | - | Metric (fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread |
| Thread Diameter (Inserted) - Metric | 3 ～ 12 | 2 ～ 8 | 2 ～ 18 | 2 ～ 8 | 2.5 ～ 30 | 3 ～ 12 | - | 3 | 3 ～ 16 | 2 ～ 20 | 3 ～ 24 | 5$5 | 2 ～ 24 | - | - | 3 ～ 16 | - | 2.5 ～ 16 | 2 ～ 18 | 3 ～ 12 | 3 ～ 16 | - | 2 ～ 10 | 2.5 ～ 10 | 2 ～ 24 | 1.4 ～ 5 | 2.5 ～ 24 | 2 ～ 18 | 3 ～ 16 | 3 ～ 12 | - | 4 | 8 ～ 24 | - | 3 ～ 4 | - | 2.5 ～ 12 | 3 ～ 10 | 3 ～ 6 | 2 ～ 6 | 10 ～ 20 | - | 16 | 2.6 ～ 6 | 2 ～ 42 |
| Thread Diameter (Inserted) - Inch | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1-1/4-7 ～ #12-24 | - | 1/2 ～ No. 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2-13 ～ #10-24 | - | - | - | - | #10-32 | - | - | - | - | - | - | - | - | - |
| Length (After Insertion) L (D = Screw Shaft Dia. M) | - | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 3D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D | - | 1.5D | - | - | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.5D / 0.6D | - | 1D / 1.5D / 2D | - | - | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 2.5D | 1D / 1.5D / 2D | - | - | - | 1D / 1.5D / 2D / 2.5D | - | 1D / 1.5D / 2D | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | - | 1.5D / 2D / 2.5D | 1D / 1.5D / 2D / 2.5D / 3D |
| Notch | No | No | Presence | No | - | Presence | - | No | - | - | Presence | Presence | Presence | - | Presence | - | No | No | No | Presence | Presence | - | No | No | Presence | No | Presence | - | - | - | Presence | No | Presence | - | No | Presence | No | - | - | No | Presence | - | No | No | Presence |
| Shape | Slotted | Standard | - | Standard | Slotted | - | - | Standard | 3-Hole Type | - | - | - | - | - | - | 3-Hole Type | Slotted | - | - | Standard | - | - | Standard | - | - | Standard | - | - | Standard | Chip-free Type | - | - | - | - | - | - | - | Small Outside Diameter Slotted Type | Standard | Standard | - | - | 3-Hole Type | Standard | - |
| Sale Unit | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. |
Loading...
Configure
Filters
-
Category
-
Application
- Light Metal
- Cast Iron
- General Resin
- Wood
-
Material
- Steel
- Stainless steel (SUS303 / SUS304)
- 316 Stainless Steel
- 430F Stainless Steel
- Brass
- Phosphor Bronze
- Nitronic 60
- Aluminum
- Stainless steel
-
Screw Type
- Metric (coarse) Thread
- Metric (fine) Thread
- Unify (coarse) Thread
- Unify (Fine) Thread
- Whitworth (Coarse) Screw
-
Metric / Inch
- metric
-
Thread Diameter (Inserted) - Metric
-
Thread Diameter (Inserted) - Inch
-
Length (After Insertion) L (D = Screw Shaft Dia. M)
-
Notch
-
Shape
-
Sale Unit
Brand
-
- Recoil (26)
- KKV (9)
- Sunco (8)
- Precision Tsugami (7)
- Nippon Sprew (5)
- Tokai (5)
- Japan Drive It (4)
- Hirosugi-Keiki (2)
- Sel Japan (2)
- NBK (1)
- AMPG (0)
- IMAO (0)
- KSSC (0)
- Accurate (0)
- Bohsei (0)
- ESCO (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy