MenuClose
Inserts（Screw Type：Metric (coarse) Thread）
Select a subcategory
| Days to Ship |
|
|---|
-
Inserts - Threaded, Slotted, Self-Tapping
MISUMI
• Operating Environment: Manufacturing Equipment
• Application: Light Metal- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Inserts - Press Fit, Brass, Cadmium-Free, Flanged Bit Insert【1-5,000 Pieces Per Package】
Tokai
General purpose type. Low cost and well balanced.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded, Stainless Steel, Coarse
MISUMI
• Operating Environment: Manufacturing Equipment
• Application: Light Metal
• Material: 304 Stainless Steel
• Screw Type: Metric (fine) Thread- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 2/4【1-5,000 Pieces Per Package】
Tokai
These inserts are the best choice for easy and secure fitment into plastic holes.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 302
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Configure Now
Ships as soon as Same Day Stock Items Included
-
Inserts - Threaded, Stainless Steel, Coarse, 100 Pack【100 Pieces Per Package】
MISUMI
Package-Deal Purchasing recommended for bolts of large volume use.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Inserts - Recoil Threaded, Nitronic 60
Recoil
Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Press Fit, Flanged, Brass, HFB
Hirosugi-Keiki
[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingConfigure Now
Ships as soon as 17 Days -
Inserts - Self Tapping, Three Hole, Short, Type 308
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Recoil Threaded, Phosphor Bronze
Recoil
Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 6 Days -
Inserts - Threaded, Stainless Steel, E-Sert
Precision Tsugami
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Self Tapping, Three Hole, Short, Type 307
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Configure Now
Ships as soon as 4 Days -
Inserts - Ensat Manual Machining Tool, Type 610
KKV
• Category: Tool
• Sale Unit: Low Quantity Available beginning with 1 pc.
• Material: Iron
• Screw Type: Metric (coarse) ThreadConfigure Now
Ships as soon as 4 Days -
Inserts - Threaded Insert Installation Tool, Black Oxide Finish
MISUMI
• Category: Tool
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Inserts - Tangless, Stainless Steel, Metric Coarse
Accurate
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Recoil Tangless Insert (Nitronic 60)
Recoil
Tangless insert that does not require lubricant oil.
[Features]
·Dedicated tools enable the insertion and extraction without tongues
·Extraction will not damage the male threads nor the product
·No need to break off the tongues, look for the broken tongues, or check with gauges
·Prevents screw galling (seizure) up to 425°C
[Applications]
·Applicable in a wide range of industries such as liquid crystal and semiconductor related products- Volume Discount is available
Configure Now
Ships as soon as 5 Days -
Inserts - Recoil Threaded, Stainless Steel
Recoil
An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded, Stainless Steel, with Notch, Metric【5-10 Pieces Per Package】
Recoil
[Type] Threaded Insert Use
[Application] Light Metal
[Materials] SUS304 with Notch
[Application] Light Metal
[Screw type] Coarse/Fine Screw Diameter (after insertion) 2 2.2 2.5 3 3.5 4 5 6 7 8 9 10 11 12 14 16 18 20 Length (after insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg.
[Pitch (mm)] 0.4 0.45 0.5 0.6 0.7 0.8 1.0 1.25 1.5 1.75 2.0 2.5 Usage Environment: Internal Combustion Engines/Manufacturing Equipment Quantity 5 10Configure Now
Ships as soon as 4 Days -
Inserts - Press Fit, SL Type【1-5,000 Pieces Per Package】
Japan Drive It
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Self Tapping, Chip-Free, Long, Type 338
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Configure Now
Ships as soon as 4 Days -
Inserts - Tangless, Threaded, Stainless Steel
MISUMI
Revised Screw Insert. No Need of Breaking Tongue after Insertion. Easy Extraction with a specified tool. Facilitates Insert Operation compared with conventional products.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Inserts - Threaded, Stainless Steel, Phosphor Bronze【1-100 Pieces Per Package】
Nippon Sprew
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Press Fit, Brass, Cadmium-Free, SB (Z) Type【1-15,000 Pieces Per Package】
Tokai
General purpose type. Low cost and well balanced.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Recoil Free Running Thread, Stainless Steel, Locking
Recoil
Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Self Tapping, Ultra Coarse, Type 309
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Configure Now
Ships as soon as 4 Days -
Inserts - Self Tapping, Chip-Free, Short, Type 337
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Configure Now
Ships as soon as 4 Days -
Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 4, Flanged【1-1,000 Pieces Per Package】
Tokai
Offers the strongest tension and other strengths over other inserts.
Configure Now
Ships as soon as 4 Days -
Inserts - Press Fit, C-Lock (CL Type)【100 Pieces Per Package】
Bohsei
The outer knurled form is reversed, which allows for high tensile strength and torque strength.
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded, Non-Locking【1-1,000 Pieces Per Package】
Sel Japan
Optimal nut for preventing looseness of vibrating parts, etc. For mounting, press in and tighten with a normal screwdriver. No special tools required.
Configure Now
Ships as soon as 4 Days -
Brass Insert Nut (Screw-In Type) IRB/IRB-C
Hirosugi-Keiki
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing
RoHS-compliantConfigure Now
Ships as soon as 10 Days -
Inserts - Threaded, Floating【1-1,000 Pieces Per Package】
Sel Japan
Able to obtain high retention force. Reduces work hours and costs drastically, and eliminates pitching shift during assembly.
Configure Now
Ships as soon as 4 Days -
Inserts - Press Fit, C-Lock (HCL Type)【50-100 Pieces Per Package】
Bohsei
Flange shape enables screws to be tightened without damaging plastics. Also prevents plastic burrs from forming when inserts are pressed in.
Configure Now
Ships as soon as 4 Days -
Inserts - Tangless, Stainless Steel
Recoil
• Category: Tangless
• Sale Unit: Low Quantity Available beginning with 1 pc.
• Application: Light Metal
• Material: Stainless steel (SUS303 / SUS304)
• Screw Type: Metric (coarse) Thread- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 303
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Configure Now
Ships as soon as 4 Days -
Inserts - Self Tapping, Brass, Type 305
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Configure Now
Ships as soon as 4 Days -
Japan Drive It
[Type] Press Fit Use
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Tangless, Stainless Steel, Metric Coarse, Locking
Accurate
• Category: Tangless
• Material: Stainless steel (SUS303 / SUS304)
• Screw Type: Metric (coarse) Thread
• Number Of Pieces: 50 pcs.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Brass Insert Nut (Screw-In Type / Slotted) IRB-SW/-SCW
Hirosugi-Keiki
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing
RoHS-compliantConfigure Now
Ships as soon as 10 Days -
Inserts - Threaded, Stainless Steel【20 Pieces Per Package】
KSSC
Insert screw that can be inserted and removed easily and smoothly.
[Features]
· Ready-to-use screw insert, compatible with the tools you have at hand.
· The sampling notch makes it unnecessary to forcibly pull out to avoid damaging the base material.
[Applications]
· For reinforcement of materials such as aluminum and plastic where female threads have low strength.
· Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.
· For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.
· Repairs and reforms broken, worn out, and crushed female threads.Configure Now
Ships as soon as 4 Days -
Inserts - Tangless, Phosphor Bronze, Metric Coarse
Accurate
• Category: Tangless
• Material: Phosphor Bronze (C5191W-H)
• Screw Type: Metric (coarse) Thread
• Number Of Pieces: 100 pcs./bag- Volume Discount is available
Configure Now
Ships as soon as 7 Days -
Inserts - Press Fit, Brass, Cadmium-Free, Flanged【1-600 Pieces Per Package】
Tokai
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
Configure Now
Ships as soon as 4 Days -
Inserts - Recoil Free Running Thread, Stainless Steel, with Notch, Metric【1-3 Pieces Per Package】
Recoil
Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Recoil Free Running Thread, Extra Short
Recoil
· Type: Threaded insert use
· Application: Light metal
· Materials: SUS304
· Thread type: Coarse with notch
· Sales unit: Available individually starting from quantities of 1
· Thread diameter after insertion (mm): 3, 4, 5, 6, 8, 10
· Length after insertion (D = screw diameter M): 0.5D, 0.8D- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Press Fit, HL Type【1-5,000 Pieces Per Package】
Japan Drive It
· Type: Press fit use
· Application: Resin, general
· Material: Brass
· Thread ridge type: Metric coarse screw, without notch
· Shape: Standard
· Diameter (following insertion): M3, M3.5, M4, M5, M6
· Length following insertion (D = screw diameter M): 1.5D, 2D
· Length (mm): 4.0, 5.8, 7.2, 8.2, 9.5, 12.7- Volume Discount is available
Configure Now
Ships as soon as 4 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Category |
| Application |
| Material |
| Screw Type |
| Thread Diameter (Inserted) - Metric |
| Thread Diameter (Inserted) - Inch |
| Length (After Insertion) L (D = Screw Shaft Dia. M) |
| Notch |
| Shape |
| Sale Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | Tokai | MISUMI | Tokai | KKV | MISUMI | Recoil | Hirosugi-Keiki | KKV | Recoil | NBK | Precision Tsugami | KKV | KKV | MISUMI | Accurate | Recoil | Recoil | Recoil | Japan Drive It | KKV | MISUMI | Nippon Sprew | Tokai | Recoil | KKV | KKV | Tokai | Bohsei | Sel Japan | Hirosugi-Keiki | Sel Japan | Bohsei | Recoil | KKV | KKV | Japan Drive It | Accurate | Hirosugi-Keiki | KSSC | Accurate | Tokai | Recoil | Recoil | Japan Drive It |
| Product Series | Inserts - Press Fit, Brass, Cadmium-Free, Flanged Bit Insert【1-5,000 Pieces Per Package】 | Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 2/4【1-5,000 Pieces Per Package】 | Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 302 | Inserts - Threaded, Stainless Steel, Coarse, 100 Pack【100 Pieces Per Package】 | Inserts - Threaded Insert Installation Tool, Black Oxide Finish | Inserts - Threaded, Stainless Steel, with Notch, Metric【5-10 Pieces Per Package】 | Inserts - Threaded, Stainless Steel, Phosphor Bronze【1-100 Pieces Per Package】 | Inserts - Press Fit, Brass, Cadmium-Free, SB (Z) Type【1-15,000 Pieces Per Package】 | Inserts - Recoil Free Running Thread, Stainless Steel, Locking | Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 4, Flanged【1-1,000 Pieces Per Package】 | Inserts - Press Fit, C-Lock (CL Type)【100 Pieces Per Package】 | Inserts - Press Fit, C-Lock (HCL Type)【50-100 Pieces Per Package】 | Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 303 | Inserts - Press Fit, Brass, Cadmium-Free, Flanged【1-600 Pieces Per Package】 | Inserts - Recoil Free Running Thread, Stainless Steel, with Notch, Metric【1-3 Pieces Per Package】 | ||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
| Days to Ship |
Same Day
Stock Items Included | 4 Days |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days | 17 Days | 4 Days | 4 Days | 6 Days | 4 Days | 4 Days | 4 Days |
Same Day Stock Items Included | 4 Days | 5 Days | 4 Days | 4 Days | 4 Days | 4 Days |
Same Day
Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 10 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 10 Days | 4 Days | 7 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Specifications |
|
|
| ||||||||||||||||||||||||||||||||||||||||||
| Category | Self-Tapping | Standard | Standard | Standard | Self-Tapping | Standard | Standard | Press Fitting | Self-Tapping | Standard | Key Locked | Standard | Self-Tapping | Tool | Tool | Tangless | Tangless | Standard | Standard | Press Fitting | Self-Tapping | Tangless | Standard | Standard | Standard | Self-Tapping | Self-Tapping | Standard | Press Fitting | Crimped | Self-Tapping | Crimped | Press Fitting | Tangless | Self-Tapping | Self-Tapping | Press Fitting | Tangless | Self-Tapping | Standard | Tangless | Standard | Standard | Standard | Press Fitting |
| Application | Light Metal | General Resin | Light Metal / Cast Iron / General Resin | General Resin | - | Light Metal | Light Metal | Light Metal | - | Light Metal | Light Metal / Cast Iron / General Resin / Wood | Light Metal / Cast Iron / General Resin | - | - | Light Metal / Cast Iron / General Resin | Light Metal / Cast Iron / General Resin | Light Metal | Light Metal | Light Metal | - | - | Light Metal | Light Metal | General Resin | Light Metal | - | - | General Resin | General Resin | Light Metal | Light Metal | Light Metal | General Resin | Light Metal | - | - | General Resin | Light Metal / Cast Iron / General Resin | Light Metal | Light Metal / Cast Iron / General Resin | Light Metal / Cast Iron / General Resin | General Resin | Light Metal | Light Metal | General Resin |
| Material | Steel / Stainless steel (SUS303 / SUS304) | Brass | Stainless steel (SUS303 / SUS304) | Brass | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel / Brass | Stainless steel (SUS303 / SUS304) | Nitronic 60 | Brass | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | Phosphor Bronze | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | Steel | - | Stainless steel (SUS303 / SUS304) | Nitronic 60 | 316 Stainless Steel | Stainless steel (SUS303 / SUS304) | Brass | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) / Phosphor Bronze | Brass | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) / Brass | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | Brass | Brass | Stainless steel (SUS303 / SUS304) | Brass | Steel / Stainless steel (SUS303 / SUS304) | Brass | Stainless steel (SUS303 / SUS304) | Steel | Brass | Brass | Stainless steel (SUS303 / SUS304) | Brass | Stainless steel (SUS303 / SUS304) | Phosphor Bronze | Brass | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Brass |
| Screw Type | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread |
| Thread Diameter (Inserted) - Metric | 3 ～ 12 | 2 ～ 8 | 2 ～ 18 | 2 ～ 10 | 2.5 ～ 30 | 3 ～ 8 | 3 ～ 12 | 3 | 3 ～ 16 | 3 ～ 24 | 5$5 | 2 ～ 24 | 3 ～ 16 | 2.5 ～ 16 | 2 ～ 18 | 2 ～ 24 | 3 ～ 12 | 3 ～ 16 | 2 ～ 20 | 2 ～ 10 | 3 ～ 16 | 2.5 ～ 10 | 2 ～ 30 | 1.4 ～ 6 | 2.5 ～ 24 | 3 ～ 16 | 3 ～ 12 | 3 ～ 8 | 2 ～ 6 | 3 ～ 4 | 2 ～ 8 | 3 ～ 4 | 3 ～ 6 | 2.5 ～ 12 | 3 ～ 10 | 3 ～ 6 | 2 ～ 6 | 2.5 ～ 12 | 2.6 ～ 8 | 3 ～ 6 | 3 ～ 6 | 2.6 ～ 8 | 2 ～ 42 | 3 ～ 8 | 3 ～ 6 |
| Thread Diameter (Inserted) - Inch | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Length (After Insertion) L (D = Screw Shaft Dia. M) | - | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1.5D | - | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.5D / 0.6D | - | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D | 1D / 1.5D / 2D | - | - | 1.5D / 2D | - | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | - | - | 1D / 1.5D / 2D | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1.5D / 2D / 2.5D | 1D / 1.5D / 2D / 2.5D / 3D | 0.5D / 0.8D | 1.5D / 2D |
| Notch | No | No | Presence | No | - | Presence | Presence | No | - | Presence | Presence | Presence | - | No | No | No | Presence | Presence | Presence | No | - | No | Presence | No | Presence | - | - | No | - | No | No | No | - | No | - | - | No | - | No | Presence | - | No | Presence | Presence | No |
| Shape | Slotted | Standard | - | Standard | Slotted | - | - | Standard | 3-Hole Type | - | - | - | 3-Hole Type | - | - | - | Standard | - | - | Standard | Chip-free Type | - | - | Standard | - | Standard | Chip-free Type | Standard | Standard | - | Standard | - | Standard | - | Small Outside Diameter Slotted Type | Standard | Standard | - | Slotted | Standard | - | Standard | - | - | Standard |
| Sale Unit | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. | Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | - | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Box/package | Low Quantity Available beginning with 1 pc. ～ Box/package | - | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | - | Box/package | Low Quantity Available beginning with 1 pc. ～ Box/package | Box/package | Low Quantity Available beginning with 1 pc. ～ Box/package | - | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | - | Box/package | Box/package | - | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. | - |
Loading...
Configure
Filters
-
Category
-
Application
- Light Metal
- Cast Iron
- General Resin
- Wood
-
Material
- Steel
- Stainless steel (SUS303 / SUS304)
- 316 Stainless Steel
- 430F Stainless Steel
- Brass
- Phosphor Bronze
- Nitronic 60
- Aluminum
- Stainless steel
-
Screw Type
- Metric (coarse) Thread
- Metric (fine) Thread
- Unify (coarse) Thread
- Unify (Fine) Thread
- Whitworth (Coarse) Screw
-
Metric / Inch
- metric
-
Thread Diameter (Inserted) - Metric
-
Thread Diameter (Inserted) - Inch
-
Length (After Insertion) L (D = Screw Shaft Dia. M)
-
Notch
-
Shape
-
Sale Unit
Brand
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy