Days to Ship |
|
---|
Configure Now
Ships as soon as | 4 Days |
---|
FAGCCRCL FA Coated Carbide Corner Rounding Cutter Long Shank
S&K
[Features]
· A round chamfering cutter that can process a wide range of difficult-to-cut materials from raw materials to high hardness materials.
· The long shank allows for machining in deep sections.
· FA GCCRC long shank end mill
Configure Now
Ships as soon as | 4 Days |
---|
NINE9
• Single Blade/Double Blade: Single Blade
• Tool Material Type: Carbide
• Coating Presence: Included
• Product Type: Insert
• Number Contained In A Packet: 5
Configure Now
Ships as soon as | 4 Days |
---|
NINE9
• Single Blade/Double Blade: Single Blade
• Tool Material Type: Carbide
• Coating Presence: Included
• Product Type: Insert
• Dimension T (mm): 2
Configure Now
Ships as soon as | 4 Days |
---|
WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P
OSG
[Features]
・ Unique 3-flute specification suppresses chatter during machining and realizes high efficiency and high feed machining.
・ 40° twist and wide gullet combine sharpness and finished surface are achieved at a high level.
・ Returns and burrs are drastically reduced.
・ Excellent cutting chip discharge.
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
OSG
TiN coating enables higher speed and longer service life compared to NC-LDS
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
MUGEN Coating C Chamfer Cutter NSCV-M
NS TOOL
[Features]
· It enables easy C chamfering.
· Uses MUGEN coating that dramatically improves the durability.
Configure Now
Ships as soon as | 4 Days |
---|
Chamfering Cutter Super Mentori-Maru MTMS 20/30
THE CUT
[Features]
· Can be used like an end mill for machining materials from an un-machined state.
· Capable of ramping machining (α = 3°).
· Standard positive inserts of various manufacturers are mountable.
· Capable of high speed machining because of the 3-flute/4-flute design.
· Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used.
· The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
· The insert allows for chamfering up to C7. (depends on the insert cutting edge.)
· Change the insert material or machining conditions for use with different types of work material.
Configure Now
Ships as soon as | 4 Days |
---|
MUGEN-COATING 2-Flute Inner Radius Cutter MIR200
NS TOOL
• Use: R Chamfer
• Tool Material Type: Carbide
• Coating Presence: Included
• Coating Type: TiAlN
Configure Now
Ships as soon as | 4 Days |
---|
Corner Radius Cutter for Carbide Steel and Stainless Steel ALD Coating
IWATATOOL
[Features]
· The raking blades/flutes ensure a highly precise rounded form.
· First-ever large rake angle for round chamfering tools, dramatically improved sharpness/surface roughness, significantly reduced cutting heat, and improved runout accuracy
Configure Now
Ships as soon as | 4 Days |
---|
Carbide Center Drill Type A 60°
IWATATOOL
[Features]
· The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.
· Speed can be enhanced and life can be extended.
Configure Now
Ships as soon as | 4 Days |
---|
Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X
7 LEADERS
• Tool Material Type: Carbide
• Point Angle(θ): 90
• Coating Presence: Included
• Coating Type: Others
• Material: MG
Configure Now
Ships as soon as | 4 Days |
---|
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
・ Unique 3-flute specification suppresses chattering during machining and realizes high efficiency and high feed machining
・ 40° twist and wide gullet combine sharpness and finished surface are achieved at a high level.
・ The return and burr are drastically reduced
・ Excellent cutting chip discharge
Configure Now
Ships as soon as | 4 Days |
---|
WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P
OSG
[Features]
・ Unique 3-flute specification suppresses chatter during machining and realizes high efficiency and high feed machining.
・ 40° twist and wide gullet combine sharpness and finished surface are achieved at a high level.
・ Returns and burrs are drastically reduced.
・ Excellent cutting chip discharge.
Configure Now
Ships as soon as | 4 Days |
---|
Insert For General Purpose Chamfering Cutter, MD-TD
THE CUT
[Features]
· Carbide base material for a longer tool life. As 3 cutting edges can be used, it is also economical.
Configure Now
Ships as soon as | 4 Days |
---|
Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS
OSG
Ideal for chamfering deep parts with a tip angle of 90°
Configure Now
Ships as soon as | 4 Days |
---|
Leading Drill, Carbide FX Coating FX-LDS
OSG
It can be used not only for chamfering, but also centering with high speed and long service life
Configure Now
Ships as soon as | 4 Days |
---|
2-Flute, Corner Rounding Type FX-ECR
OSG
Dedicated tool for R chamfering. High-toughness carbide alloy is used as base material, enabling use for a wide range of work materials.
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
Configure Now
Ships as soon as | 4 Days |
---|
VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-Speed Steel Long Shank
OSG
Ideal for chamfering deep parts with a tip angle of 90°
Configure Now
Ships as soon as | 4 Days |
---|
Straight Shank, Countersink, HSS, TiAlN Coating 90°
ILIX
• Use: Hole Chamfer
• Single Blade/Double Blade: Single Blade
• Peripheral Blade Availability: Included
• Tool Material Type: High-Speed Steel
• Point Angle(θ): 90
Configure Now
Ships as soon as | 4 Days |
---|
FAGCCRC FA Coated Carbide Corner Rounding Cutter
S&K
[Features]
· A round chamfering cutter that can process a wide range of difficult-to-cut materials from raw materials to high hardness materials.
· Carbide FA coating improves machining efficiency, provides a long life, and enables high precision finished surface machining
Configure Now
Ships as soon as | 4 Days |
---|
HSS HG Center Drill, A Type, 60°
IWATATOOL
[Features]
· High-grade center drill for mass production.
· Thoroughly improves tact time and achieves a stable life.
· Center drill improved for mass production.
· Small diameter sizes, in particular, boast life several times longer than conventional center drills
Configure Now
Ships as soon as | 4 Days |
---|
IWATATOOL
Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.
Configure Now
Ships as soon as | 4 Days |
---|
Toglon Sharp SP 60° Carbide DLC Coating
IWATATOOL
Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.
Configure Now
Ships as soon as | 4 Days |
---|
Toglon Sharp SP 90° Carbide DLC Coating
IWATATOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.
Configure Now
Ships as soon as | 4 Days |
---|
Toglon Sharp SP 90° Carbide Long Type
IWATATOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.
Configure Now
Ships as soon as | 4 Days |
---|
Toglon Sharp SP 90° Carbide Long Type DLC Coating
IWATATOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.
Configure Now
Ships as soon as | 4 Days |
---|
Carbide HG Center Drill Type A 60°
IWATATOOL
High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.
Configure Now
Ships as soon as | 4 Days |
---|
Carbide HG Center Drill, A Type, 60°, ALD Coating
IWATATOOL
High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.
Configure Now
Ships as soon as | 4 Days |
---|
Carbide HG Center Drill Type A 90°
IWATATOOL
High-grade center drill for mass production. Thoroughly improves tact time and achieves a stable life.
Configure Now
Ships as soon as | 4 Days |
---|
IWATATOOL
[Features]
· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.
Configure Now
Ships as soon as | 4 Days |
---|
IWATATOOL
[Features]
· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.
Configure Now
Ships as soon as | 4 Days |
---|
IWATATOOL
[Features]
· The centering tool is now available in carbide, thanks to the SP center with distinctive tip shape.
· Supports a wide range of workpieces from iron and stainless steel to tempered materials, aluminum and the like in drill positioning and chamfering. We have absolute confidence in improved productivity with no breakage problems.
Configure Now
Ships as soon as | 4 Days |
---|
WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.
Configure Now
Ships as soon as | 4 Days |
---|
Insert For New Tornado MT-CP/CC
THE CUT
[Features]
Cutting speed (m/min): 60 to 150
Feed speed (mm/t): 0.02 to 0.08
Set screw: MST-4S, MST-2.5S, MST-3S, MST-2 (M5), MST-2L040 (M6)
Configure Now
Ships as soon as | 4 Days |
---|
Chamfering and Centering Tool Accessory - Dedicated Insert for Double-Sided Cutter
THE CUT
Dedicated insert MT-SDM/H for THE CUT replaceable insert double-face chamfer tool.
Configure Now
Ships as soon as | 4 Days |
---|
Insert For Seat Surface Cutter, MT-DC
THE CUT
[Features]
Cutting speed (m/min): 40 to 100
Feed rate (mm/t): 0.04 to 0.1
Wrench: MFT-8/MFT-15
Configure Now
Ships as soon as | 4 Days |
---|
Chamfering Cutter Super Mentori-Maru MTMS 6.5/9
THE CUT
[Features]
· Uses a positive lathe insert for a light cutting sharpness.
· Standard positive inserts of various manufacturers are mountable.
· Capable of high speed machining because of the 3-flute design.
· Costs for replacement inserts are reduced because lathe inserts from a variety of manufactures can be used (however, the screws need to be changed).
· The high rigidity body design and 3-face restraint ensure it holds the inserts firmly.
· With the insert, the MTMS9 is capable of machining up to C7 and the MTMS6.5 up to C4.5. (depends on the insert cutting edge.)
· Change the insert material or machining conditions for use with different types of work material.
· Can be used like an end mill for machining materials from an un-machined state.·
Configure Now
Ships as soon as | 4 Days |
---|
Insert For Super Mentori-Maru ZERO
THE CUT
[Features]
· The unique shape enables high precision machining.
Configure Now
Ships as soon as | 4 Days |
---|
Brand |
---|
Product Series |
Days to Ship |
Applications |
Point Angle(deg) |
Tool Diameter (D)(mm) |
Work Material |
Single Blade/Double Blade |
Peripheral Blade Availability |
Tool Material Type |
Coating Presence |
Coating Type |
R Size(mm) |
Brand | OSG | S&K | NINE9 | NINE9 | OSG | OSG | OSG | OSG | NS TOOL | THE CUT | NS TOOL | IWATATOOL | IWATATOOL | 7 LEADERS | OSG | OSG | THE CUT | OSG | OSG | OSG | OSG | OSG | OSG | OSG | ILIX | S&K | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | OSG | THE CUT | THE CUT | THE CUT | THE CUT | THE CUT |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | FAGCCRCL FA Coated Carbide Corner Rounding Cutter Long Shank | Corner Radius Cutter for Carbide Steel and Stainless Steel ALD Coating | WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P | 3-Flute, Long Shank, Chamfering Cutter (Negative Type) LS-HSCT-N | 3-Flute, Long Shank, Chamfering Cutter (Positive Type) LS-HSCT-P | VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-Speed Steel Long Shank | WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N | Chamfering and Centering Tool Accessory - Dedicated Insert for Double-Sided Cutter | ||||||||||||||||||||||||||||||||||||
Days to Ship | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
Applications | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove / Engraving | Centering (Positioning) / Engraving | - | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Chamfering / Horizontal | Hole Chamfer / Chamfering / Horizontal / V Groove / Others | R Chamfer | R Chamfer | Centering (Positioning) | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Chamfering / Horizontal | - | - | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer | Hole Chamfer | R Chamfer | Centering (Positioning) | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | - | - | Hole Chamfer | - | Hole Chamfer / Chamfering / Horizontal / V Groove / Others | - |
Point Angle(deg) | 90 | - | 60 ~ 90 | 45 ~ 60 | - | 90 | 60 ~ 120 | 90 | 45° | - | - | - | 60 | 90 | 90° | - | - | 90 | 90 | - | 90 | 90 | - | 90 | 90 | - | 60 | 60 | 60 | 90 | 90 | 90 | 60 | 60 | 90 | 120 | 60 | 90 | - | - | - | - | - | - |
Tool Diameter (D)(mm) | 1 ~ 2 | 4 ~ 14 | 1–6 ~ 3 to 15 | 0.45~2.1 ~ 0.45~2.7 | - | 3 ~ 25 | 3 ~ 25 | 1 ~ 2 | 4 ~ 6 | - | 0.8 ~ 12.1 | 3 ~ 5 | 1 ~ 8 | 0.5 ~ 20 | - | - | - | 16 ~ 25 | 16 ~ 25 | 0.5 ~ 1.5 | 1 ~ 2 | 1 ~ 2 | - | 3 ~ 25 | 6.3 | 4 ~ 14 | 0.3 ~ 1 | 1.2 ~ 16 | 2 ~ 16 | 1.2 ~ 16 | 3 ~ 12 | 3 ~ 12 | 0.2 ~ 3 | 0.2 ~ 1 | 0.2 ~ 3 | 0.4 ~ 16 | 0.03 ~ 6 | 0.03 ~ 6 | - | - | - | - | - | - |
Work Material | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[◎] | Titanium[◎] | Titanium[◎] | Titanium[◎] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[◎] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[◎] | Titanium[○] | Titanium[○] | Titanium[◎] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] | Titanium[○] |
Single Blade/Double Blade | Single Blade | - | Single Blade | Single Blade | - | Single Blade | Single Blade | Single Blade | Single Blade | - | - | Single Blade | Double Blade | - | Single Blade | - | - | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | - | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade / Double Blade | Single Blade / Double Blade | Single Blade / Double Blade | - | - | - | - | - | - |
Peripheral Blade Availability | None | None | None | None | - | None | None | None | Included | - | - | None | None | - | None | - | - | None | None | None | None | None | None | Included | Included | None | None | None | None | None | None | None | None | None | None | None | None | None | - | - | - | - | - | - |
Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Powdered High-Speed Steel | High-Speed Steel | Carbide | Carbide | - | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | - | Carbide | Carbide | Carbide | Carbide | Carbide | Powdered High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | Carbide | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | - | Carbide | - | - | - |
Coating Presence | None | Included | Included | Included | Included | Included | Included | None | Included | - | Included | Included | None | Included | Included | Included | - | Included | Included | Included | None | None | Included | Included | Included | Included | None | None | Included | Included | None | Included | None | Included | None | None | None | None | Included | - | None | - | - | - |
Coating Type | Non-Coated | TiAlN | TiAlN / DLC | TiN | Others | TiCN | TiN | Non-Coated | TiAlN | - | TiAlN | Others | - | Others | - | Others | - | TiAlN | TiAlN | TiAlN | Non-Coated | Non-Coated | TiCN | TiCN | TiAlN | TiAlN | - | - | DLC | DLC | - | DLC | - | Others | - | - | - | - | Others | - | - | - | - | - |
R Size(mm) | - | 0.5 ~ 5 | - | - | - | - | - | - | - | - | 0.1 ~ 5 | 0.5 ~ 3 | - | - | - | - | - | - | - | 0.1 ~ 2 | - | - | - | - | - | 0.5 ~ 5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy