Days to Ship |
|
---|
Inserts - Press Fit, Brass, Cadmium-Free, Flanged Bit Insert【1-5,000 Pieces Per Package】
Tokai
General purpose type. Low cost and well balanced.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 2/4【1-5,000 Pieces Per Package】
Tokai
These inserts are the best choice for easy and secure fitment into plastic holes.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 302
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Configure Now
Ships as soon as | 4 Days |
---|
Stock Items Included
Inserts - Press Fit, Flanged, Brass, HFB
Hirosugi-Keiki
[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing
Configure Now
Ships as soon as | 17 Days |
---|
Inserts - Press Fit, SL Type【1-5,000 Pieces Per Package】
Japan Drive It
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Press Fit, Brass, Cadmium-Free, SB (Z) Type【1-15,000 Pieces Per Package】
Tokai
General purpose type. Low cost and well balanced.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Self Tapping, Ultra Coarse, Type 309
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 4, Flanged【1-1,000 Pieces Per Package】
Tokai
Offers the strongest tension and other strengths over other inserts.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Press Fit, C-Lock (CL Type)【100 Pieces Per Package】
Bohsei
The outer knurled form is reversed, which allows for high tensile strength and torque strength.
Configure Now
Ships as soon as | 4 Days |
---|
Brass Insert Nut (Screw-In Type) IRB/IRB-C
Hirosugi-Keiki
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing
RoHS-compliant
Configure Now
Ships as soon as | 10 Days |
---|
Inserts - Press Fit, C-Lock (HCL Type)【50-100 Pieces Per Package】
Bohsei
Flange shape enables screws to be tightened without damaging plastics. Also prevents plastic burrs from forming when inserts are pressed in.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Self Tapping, Brass, Type 305
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Configure Now
Ships as soon as | 4 Days |
---|
Japan Drive It
[Type] Press Fit Use
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2
Configure Now
Ships as soon as | 4 Days |
---|
Brass Insert Nut (Screw-In Type / Slotted) IRB-SW/-SCW
Hirosugi-Keiki
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing
RoHS-compliant
Configure Now
Ships as soon as | 10 Days |
---|
Inserts - Press Fit, Brass, Cadmium-Free, Flanged【1-600 Pieces Per Package】
Tokai
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Press Fit, HL Type【1-5,000 Pieces Per Package】
Japan Drive It
· Type: Press fit use
· Application: Resin, general
· Material: Brass
· Thread ridge type: Metric coarse screw, without notch
· Shape: Standard
· Diameter (following insertion): M3, M3.5, M4, M5, M6
· Length following insertion (D = screw diameter M): 1.5D, 2D
· Length (mm): 4.0, 5.8, 7.2, 8.2, 9.5, 12.7
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Press Fit, Brass, Cadmium-Free, SD Type【1-2,000 Pieces Per Package】
Tokai
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Press Fit, TEC Type【1-500 Pieces Per Package】
Japan Drive It
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 4, 5, 6, 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D 2.5D
[Length] B (mm) 3.9 5.7 8.2 9.5 12.7
Configure Now
Ships as soon as | 4 Days |
---|
Japan Drive It
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw length (after insertion)
[L](D = screw diameter M) 2D with notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4 5
[Length] B (mm) 5.8 8.2 9.5
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Self Tapping, Slotted, SCT Type
Japan Drive It
[Type] Self-tapping Used
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3, 4, 5, 6, 8, 10, Length (following insertion)
[L](D = screw diameter M) 2D 2.5D
[Length] B (mm) 6.0 8.0 10.0 14.0 15.0 18.0
Configure Now
Ships as soon as | 4 Days |
---|
Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC
Hirosugi-Keiki
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing
RoHS-compliant
Configure Now
Ships as soon as | 10 Days |
---|
Inserts - Press Fit, One Sided, Brass, HSB
Hirosugi-Keiki
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing
Configure Now
Ships as soon as | 5 Days |
---|
Japan Drive It
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4 5 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Press Fit, B-Lock Model N42
Japan Drive It
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, with notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4 6, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Press Fit, C TEC (CT Type)【100 Pieces Per Package】
Bohsei
Verification work on the embedded direction is not necessary because both ends have the same shape, which allows for faster work. Recommended when considering the use of parts feeders for automation.
Configure Now
Ships as soon as | 4 Days |
---|
Japan Drive It
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 3, 4, 5, 6, 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D
Configure Now
Ships as soon as | 4 Days |
---|
Japan Drive It
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D
[Length] B (mm) 4.8 8.0
Configure Now
Ships as soon as | 5 Days |
---|
Brass Insert Nut (Screw-In Type) IRB-W/-CW
Hirosugi-Keiki
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing
RoHS-compliant
Configure Now
Ships as soon as | 10 Days |
---|
Brand |
---|
Product Series |
Days to Ship |
Category |
Application |
Material |
Screw Type |
Thread Diameter (Inserted) - Metric |
Thread Diameter (Inserted) - Inch |
Length (After Insertion) L (D = Screw Shaft Dia. M) |
Notch |
Shape |
Sale Unit |
Brand | Tokai | Tokai | KKV | Hirosugi-Keiki | Japan Drive It | Tokai | KKV | Tokai | Bohsei | Hirosugi-Keiki | Bohsei | KKV | Japan Drive It | Hirosugi-Keiki | Tokai | Japan Drive It | Tokai | Japan Drive It | Japan Drive It | Japan Drive It | Hirosugi-Keiki | Hirosugi-Keiki | Japan Drive It | Japan Drive It | Bohsei | Japan Drive It | Japan Drive It | Hirosugi-Keiki |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Inserts - Press Fit, Brass, Cadmium-Free, Flanged Bit Insert【1-5,000 Pieces Per Package】 | Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 2/4【1-5,000 Pieces Per Package】 | Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 302 | Inserts - Press Fit, Brass, Cadmium-Free, SB (Z) Type【1-15,000 Pieces Per Package】 | Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 4, Flanged【1-1,000 Pieces Per Package】 | Inserts - Press Fit, C-Lock (CL Type)【100 Pieces Per Package】 | Inserts - Press Fit, C-Lock (HCL Type)【50-100 Pieces Per Package】 | Inserts - Press Fit, Brass, Cadmium-Free, Flanged【1-600 Pieces Per Package】 | Inserts - Press Fit, Brass, Cadmium-Free, SD Type【1-2,000 Pieces Per Package】 | Inserts - Press Fit, C TEC (CT Type)【100 Pieces Per Package】 | ||||||||||||||||||
Days to Ship | 4 Days | 4 Days |
4 Days Stock Items Included | 17 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 10 Days | 4 Days | 4 Days | 4 Days | 10 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 10 Days | 5 Days | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days | 10 Days |
Category | Standard | Standard | Self-Tapping | Press Fitting | Press Fitting | Standard | Self-Tapping | Standard | Press Fitting | Self-Tapping | Press Fitting | Self-Tapping | Press Fitting | Self-Tapping | Standard | Press Fitting | Standard | Press Fitting | Press Fitting | Self-Tapping | Self-Tapping | Press Fitting | Press Fitting | Press Fitting | Press Fitting | Press Fitting | Press Fitting | Self-Tapping |
Application | General Resin | General Resin | - | Light Metal | - | General Resin | - | General Resin | General Resin | Light Metal | General Resin | - | General Resin | Light Metal | General Resin | General Resin | General Resin | - | - | General Resin | Light Metal | Light Metal | - | - | General Resin | - | - | Light Metal |
Material | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass | Brass |
Screw Type | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread |
Thread Diameter (Inserted) - Metric | 2 ~ 8 | 2 ~ 10 | 2.5 ~ 16 | 3 | 2 ~ 10 | 1.4 ~ 6 | 3 ~ 16 | 3 ~ 8 | 2 ~ 6 | 2 ~ 8 | 3 ~ 6 | 3 ~ 6 | 2 ~ 6 | 2.6 ~ 8 | 2.6 ~ 8 | 3 ~ 6 | 2.6 ~ 8 | 2 ~ 8 | 3 ~ 5 | 3 ~ 8 | 2.6 ~ 8 | 3 ~ 4 | 3 ~ 8 | 3 ~ 6 | 3 | 2 ~ 8 | 3 ~ 4 | 2.6 ~ 8 |
Thread Diameter (Inserted) - Inch | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Length (After Insertion) L (D = Screw Shaft Dia. M) | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D | - | 1.5D | 1D / 1.5D / 2D / 2.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D | - | 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1.5D / 2D / 2.5D | 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D | 1.5D / 2D | 2D | 2D / 2.5D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D | 1D / 1.5D | 1.5D / 2D | 1.5D / 2D | - | 1.5D / 2D | 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D |
Notch | No | No | - | No | No | No | - | No | - | No | - | - | No | No | No | No | No | No | Presence | No | No | No | No | Presence | - | No | No | No |
Shape | Standard | Standard | Slotted | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Slotted | Standard | Standard | Standard | Standard | Standard | Standard | Slotted | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
Sale Unit | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. | - | Box/package | Box/package | - | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Box/package | Low Quantity Available beginning with 1 pc. ~ Box/package | - | Low Quantity Available beginning with 1 pc. ~ Box/package | - | - | Low Quantity Available beginning with 1 pc. | Box/package | Low Quantity Available beginning with 1 pc. | - | - | - | Low Quantity Available beginning with 1 pc. | - | Box/package |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy