MenuClose
Inserts（Length (After Insertion) L (D = Screw Shaft Dia. M)：1.5D）
Select a subcategory
| Days to Ship |
|
|---|
-
Inserts - Press Fit, Brass, Cadmium-Free, Flanged Bit Insert
Tokai
General purpose type. Low cost and well balanced.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded, Stainless Steel, Coarse
MISUMI
• Operating Environment: Manufacturing Equipment
• Application: Light Metal
• Material: 304 Stainless Steel
• Screw Type: Metric (fine) Thread- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 2/4【1-600 Pieces Per Package】
Tokai
These inserts are the best choice for easy and secure fitment into plastic holes.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded, Stainless Steel, Coarse, 100 Pack【100 Pieces Per Package】
MISUMI
Package-Deal Purchasing recommended for bolts of large volume use.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Inserts - Recoil Threaded, Nitronic 60
Recoil
Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Press Fit, Flanged, Brass, HFB
Hirosugi-Keiki
[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] DegreasingConfigure Now
Ships as soon as 17 Days -
Inserts - Recoil Threaded, Phosphor Bronze
Recoil
Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded, Stainless Steel, E-Sert
Precision Tsugami
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Recoil Free Running Thread, Stainless Steel, Inch Coarse
Recoil
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded, Inch Coarse, with Notch【10 Pieces Per Package】
Recoil
*Unfortunately, only lengths of 1.5D are available.
Configure Now
Ships as soon as 4 Days -
Inserts - Tangless, Stainless Steel, Metric Coarse
Accurate
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Recoil Tangless Insert (Nitronic 60)
Recoil
Tangless insert that does not require lubricant oil.
[Features]
·Dedicated tools enable the insertion and extraction without tongues
·Extraction will not damage the male threads nor the product
·No need to break off the tongues, look for the broken tongues, or check with gauges
·Prevents screw galling (seizure) up to 425°C
[Applications]
·Applicable in a wide range of industries such as liquid crystal and semiconductor related products- Volume Discount is available
Configure Now
Ships as soon as 5 Days -
Inserts - Recoil Threaded, Stainless Steel
Recoil
An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded, Stainless Steel, with Notch, Metric【5-10 Pieces Per Package】
Recoil
[Type] Threaded Insert Use
[Application] Light Metal
[Materials] SUS304 with Notch
[Application] Light Metal
[Screw type] Coarse/Fine Screw Diameter (after insertion) 2 2.2 2.5 3 3.5 4 5 6 7 8 9 10 11 12 14 16 18 20 Length (after insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg.
[Pitch (mm)] 0.4 0.45 0.5 0.6 0.7 0.8 1.0 1.25 1.5 1.75 2.0 2.5 Usage Environment: Internal Combustion Engines/Manufacturing Equipment Quantity 5 10Configure Now
Ships as soon as 4 Days -
Inserts - Press Fit, SL Type【1-5,000 Pieces Per Package】
Japan Drive It
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Tangless, Threaded, Stainless Steel
MISUMI
Revised Screw Insert. No Need of Breaking Tongue after Insertion. Easy Extraction with a specified tool. Facilitates Insert Operation compared with conventional products.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Inserts - Threaded, Stainless Steel, Phosphor Bronze【1-100 Pieces Per Package】
Nippon Sprew
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Press Fit, Brass, Cadmium-Free, SB (Z) Type【1-10,000 Pieces Per Package】
Tokai
General purpose type. Low cost and well balanced.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Recoil Free Running Thread, Stainless Steel, Locking
Recoil
Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded, Inch Coarse【1-100 Pieces Per Package】
Nippon Sprew
Screw reinforcer featuring coiling of a diamond shaped stainless steel thread. Can achieve high-reliability tightening by using the springback skillfully.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 4, Flanged【1,000 Pieces Per Package】
Tokai
Offers the strongest tension and other strengths over other inserts.
Configure Now
Ships as soon as 4 Days -
Inserts - Recoil Free Running Thread, Stainless Steel, Metric
Recoil
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
- Volume Discount is available
Configure Now
Ships as soon as 6 Days -
Brass Insert Nut (Screw-In Type) IRB/IRB-C
Hirosugi-Keiki
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing
RoHS-compliantConfigure Now
Ships as soon as 10 Days -
Inserts - Threaded, Inch Fine【1-100 Pieces Per Package】
Nippon Sprew
Screw reinforcer featuring a coiled, diamond-shaped stainless steel thread. Can achieve high-reliability tightening by effective use of the the springback.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Tangless, Stainless Steel
Recoil
• Category: Tangless
• Sale Unit: Low Quantity Available beginning with 1 pc.
• Application: Light Metal
• Material: Stainless steel (SUS303 / SUS304)
• Screw Type: Metric (coarse) Thread- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Japan Drive It
[Type] Press Fit Use
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Tangless, Stainless Steel, Metric Coarse, Locking
Accurate
• Category: Tangless
• Material: Stainless steel (SUS303 / SUS304)
• Screw Type: Metric (coarse) Thread
• Number Of Pieces: 50 pcs.- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Brass Insert Nut (Screw-In Type / Slotted) IRB-SW/-SCW
Hirosugi-Keiki
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing
RoHS-compliantConfigure Now
Ships as soon as 10 Days -
Inserts - Threaded, Metric Fine【1-100 Pieces Per Package】
Nippon Sprew
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded, Stainless Steel【20 Pieces Per Package】
KSSC
Insert screw that can be inserted and removed easily and smoothly.
[Features]
· Ready-to-use screw insert, compatible with the tools you have at hand.
· The sampling notch makes it unnecessary to forcibly pull out to avoid damaging the base material.
[Applications]
· For reinforcement of materials such as aluminum and plastic where female threads have low strength.
· Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.
· For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.
· Repairs and reforms broken, worn out, and crushed female threads.Configure Now
Ships as soon as 5 Days -
Inserts - Tangless, Phosphor Bronze, Metric Coarse
Accurate
• Category: Tangless
• Material: Phosphor Bronze (C5191W-H)
• Screw Type: Metric (coarse) Thread
• Number Of Pieces: 100 pcs./bag- Volume Discount is available
Configure Now
Ships as soon as 7 Days -
Inserts - Press Fit, Brass, Cadmium-Free, Flanged
Tokai
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
Configure Now
Ships as soon as 4 Days -
Inserts - Recoil Free Running Thread, Stainless Steel, with Notch, Metric
Recoil
Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Press Fit, HL Type【1,000 Pieces Per Package】
Japan Drive It
· Type: Press fit use
· Application: Resin, general
· Material: Brass
· Thread ridge type: Metric coarse screw, without notch
· Shape: Standard
· Diameter (following insertion): M3, M3.5, M4, M5, M6
· Length following insertion (D = screw diameter M): 1.5D, 2D
· Length (mm): 4.0, 5.8, 7.2, 8.2, 9.5, 12.7- Volume Discount is available
Configure Now
Ships as soon as 5 Days -
Inserts - Recoil Threaded, Stainless Steel【1-100 Pieces Per Package】
Sunco
[Nominal M] 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
[Material] Stainless Steel
[Surface Processing] BareConfigure Now
Ships as soon as 4 Days -
Inserts - Threaded, Stainless Steel, Metric Fine, E-Sert Hemlock-Made【1-100 Pieces Per Package】
Sunco
[Nominal M] 6, 8, 14, 18, 20, 22, 24, 27, 30, 33, 36, 39
[Material] Stainless Steel
[Surface Processing] BareConfigure Now
Ships as soon as 4 Days -
Inserts - Tangless, Stainless Steel【10-20 Pieces Per Package】
KSSC
Tangless insert screw.
[Features]
· This tangless insert drastically cuts down on work procedures and time, which increases work efficiency, making it possible to reduce costs.
· Insert work, which took 56 seconds in the past, was drastically shortened to 7 seconds by using a dedicated power tool.
· Tangless design means no tangs to break off and no concerns for missing pitches or damaging the base material.
[Applications]
· For reinforcement of materials such as aluminum and plastic where female threads have low strength.
· Weight reduction is possible since it can be inserted into the base material of materials prone to female screw breakage.
· For countermeasures against vibration and reinforcement of spots where strong vibration is present, such as with industrial machinery and the engines of vehicles or motorcycles.
· Repairs and reforms broken, worn out, and crushed female threads.Configure Now
Ships as soon as 4 Days -
Aluminum Insert Nut (Screw-In Type / Coated With Loosening Prevention Agent) IRL-BW/-KW
Hirosugi-Keiki
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Lead-free free-cutting aluminum (KS26), lead content 300 ppm or less
[Treatment] Black anodized (BAL)/Kanigen plating
RoHS-compliantConfigure Now
Ships as soon as 10 Days -
Recoil
[Features]
·Stress is distributed over the entire length of fit, preventing the thread breakage and increasing the holding or tensile strength, which as a result, enhances the fastening force greater than the original screw
·Dedicated tools enable the insertion and extraction without tongues
·Extraction will not damage the male threads nor the product
·No need to break off the tongues, look for the broken tongues, or check with gauges
[Applications]
·Application example: Semiconductor equipment parts, air tools, industrial robots, etc.- Volume Discount is available
Configure Now
Ships as soon as 5 Days -
Inserts - Threaded, Metric Coarse, Locking【1-100 Pieces Per Package】
Nippon Sprew
This SPREW has enhanced locking characteristics. The central portion of the SPREW coil is formed from several windings of angular grips. The spring action of the grips keeps male screws firmly tightened, and prevents looseness caused by strong impacts or shocks.
Configure Now
Ships as soon as 4 Days -
Inserts - Press Fit, Brass, Cadmium-Free, SD Type
Tokai
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Threaded, Inch Fine, with Notch【10 Pieces Per Package】
Recoil
*Unfortunately, only lengths of 1.5D are available.
[Features]
• Recoil created by winding high quality stainless steel wire with a rhomboid cross section into a spring shape
• Insert is made one turn larger than the base material hole, and has a mild taper
• Once installed, the spring action makes it an almost permanent fixture that cannot be extracted.Configure Now
Ships as soon as 4 Days -
Inserts - Recoil Free Running Thread, Stainless Steel, Inch Fine
Recoil
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Inserts - Press Fit, TEC Type【500 Pieces Per Package】
Japan Drive It
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 4, 5, 6, 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D 2.5D
[Length] B (mm) 3.9 5.7 8.2 9.5 12.7- Volume Discount is available
Configure Now
Ships as soon as 13 Days -
Inserts - Tangless Insert, Attached to Sheet Packaging, Metric Coarse
Accurate
• Category: Tangless
• Material: Stainless steel (SUS303 / SUS304)
• Screw Type: Metric (coarse) Thread
• Number Of Pieces: 50 pcs.- Volume Discount is available
Configure Now
Ships as soon as 7 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Category |
| Application |
| Material |
| Screw Type |
| Thread Diameter (Inserted) - Metric |
| Thread Diameter (Inserted) - Inch |
| Length (After Insertion) L (D = Screw Shaft Dia. M) |
| Notch |
| Shape |
| Sale Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Tokai | MISUMI | Tokai | MISUMI | Recoil | Hirosugi-Keiki | Recoil | Precision Tsugami | Recoil | Recoil | Accurate | Recoil | Recoil | Recoil | Japan Drive It | MISUMI | Nippon Sprew | Tokai | Recoil | Nippon Sprew | Tokai | Recoil | Hirosugi-Keiki | Nippon Sprew | Recoil | Japan Drive It | Accurate | Hirosugi-Keiki | Nippon Sprew | KSSC | Accurate | Tokai | Recoil | Japan Drive It | Sunco | Sunco | KSSC | Hirosugi-Keiki | Recoil | Nippon Sprew | Tokai | Recoil | Recoil | Japan Drive It | Accurate |
| Product Series | Inserts - Press Fit, Brass, Cadmium-Free, Flanged Bit Insert | Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 2/4【1-600 Pieces Per Package】 | Inserts - Threaded, Stainless Steel, Coarse, 100 Pack【100 Pieces Per Package】 | Inserts - Recoil Free Running Thread, Stainless Steel, Inch Coarse | Inserts - Threaded, Inch Coarse, with Notch【10 Pieces Per Package】 | Inserts - Threaded, Stainless Steel, with Notch, Metric【5-10 Pieces Per Package】 | Inserts - Threaded, Stainless Steel, Phosphor Bronze【1-100 Pieces Per Package】 | Inserts - Press Fit, Brass, Cadmium-Free, SB (Z) Type【1-10,000 Pieces Per Package】 | Inserts - Recoil Free Running Thread, Stainless Steel, Locking | Inserts - Heat-Set, Brass, Cadmium-Free, Ultrasert Type 4, Flanged【1,000 Pieces Per Package】 | Inserts - Recoil Free Running Thread, Stainless Steel, Metric | Inserts - Recoil Free Running Thread, Stainless Steel, with Notch, Metric | Inserts - Recoil Threaded, Stainless Steel【1-100 Pieces Per Package】 | Inserts - Threaded, Stainless Steel, Metric Fine, E-Sert Hemlock-Made【1-100 Pieces Per Package】 | Inserts - Tangless, Stainless Steel【10-20 Pieces Per Package】 | Aluminum Insert Nut (Screw-In Type / Coated With Loosening Prevention Agent) IRL-BW/-KW | Inserts - Threaded, Metric Coarse, Locking【1-100 Pieces Per Package】 | Inserts - Threaded, Inch Fine, with Notch【10 Pieces Per Package】 | Inserts - Recoil Free Running Thread, Stainless Steel, Inch Fine | Inserts - Tangless Insert, Attached to Sheet Packaging, Metric Coarse | |||||||||||||||||||||||||
| CAD |
|
|
|
| |||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Days |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included | 4 Days | 17 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days | 4 Days | 4 Days | 4 Days |
Same Day
Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 6 Days | 10 Days | 4 Days | 4 Days | 4 Days | 4 Days | 10 Days | 4 Days | 5 Days | 7 Days | 4 Days | 4 Days | 5 Days | 4 Days | 4 Days | 4 Days | 10 Days | 5 Days | 4 Days | 4 Days | 4 Days | 4 Days | 13 Days | 7 Days |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Category | Standard | Standard | Standard | Standard | Standard | Press Fitting | Standard | Standard | Standard | Standard | Tangless | Tangless | Standard | Standard | Press Fitting | Tangless | Standard | Standard | Standard | Standard | Standard | Standard | Self-Tapping | Standard | Tangless | Press Fitting | Tangless | Self-Tapping | Standard | Standard | Tangless | Standard | Standard | Press Fitting | Standard | Standard | Tangless | Self-Tapping | Tangless | Standard | Standard | Standard | Standard | Press Fitting | Tangless |
| Application | General Resin | Light Metal / Cast Iron / General Resin | General Resin | Light Metal | Light Metal | Light Metal | Light Metal | Light Metal / Cast Iron / General Resin | Light Metal | Light Metal | Light Metal / Cast Iron / General Resin | Light Metal | Light Metal | Light Metal | - | Light Metal | Light Metal | General Resin | Light Metal | Light Metal | General Resin | Light Metal | Light Metal | Light Metal | Light Metal | General Resin | Light Metal / Cast Iron / General Resin | Light Metal | Light Metal | Light Metal / Cast Iron / General Resin | Light Metal / Cast Iron / General Resin | General Resin | Light Metal | General Resin | - | - | Light Metal / Cast Iron / General Resin | Light Metal | Light Metal | Light Metal | General Resin | Light Metal | Light Metal | - | Light Metal / Cast Iron / General Resin |
| Material | Brass | Stainless steel (SUS303 / SUS304) | Brass | Stainless steel (SUS303 / SUS304) | Nitronic 60 | Brass | Phosphor Bronze | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Nitronic 60 | 316 Stainless Steel | Stainless steel (SUS303 / SUS304) | Brass | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) / Phosphor Bronze | Brass | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Brass | Stainless steel (SUS303 / SUS304) | Brass | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Brass | Stainless steel (SUS303 / SUS304) | Brass | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Phosphor Bronze | Brass | Stainless steel (SUS303 / SUS304) | Brass | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Aluminum | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Brass | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Brass | Stainless steel (SUS303 / SUS304) |
| Screw Type | Metric (coarse) Thread | Metric (coarse) Thread / Metric (fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Unify (coarse) Thread | Unify (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread / Metric (fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Unify (coarse) Thread | Metric (coarse) Thread | Metric (fine) Thread | Metric (coarse) Thread | Unify (Fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Unify (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Unify (Fine) Thread | Unify (Fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread |
| Thread Diameter (Inserted) - Metric | 2 ～ 6 | 2 ～ 18 | 3 ～ 8 | 3 ～ 8 | 3 ～ 12 | 3 | 3 ～ 24 | 2 ～ 24 | - | - | 2 ～ 20 | 3 ～ 12 | 3 ～ 16 | 2 ～ 20 | 2 ～ 8 | 2.5 ～ 10 | 2 ～ 30 | 1.4 ～ 6 | 2.5 ～ 24 | - | 8 | 8 ～ 24 | 2 ～ 8 | - | 2.5 ～ 12 | 5 ～ 6 | 2.5 ～ 12 | 2.6 ～ 8 | 10 ～ 20 | 3 ～ 6 | 3 ～ 6 | 4 ～ 6 | 2 ～ 42 | 3 | 2 ～ 16 | 6 ～ 39 | 2 ～ 12 | 2.6 ～ 8 | - | 4 ～ 6 | 2.6 ～ 5 | - | - | 8 | 2.5 ～ 5 |
| Thread Diameter (Inserted) - Inch | - | - | - | - | - | - | - | - | 1/2-13 ～ #12-24 | 1/4-20 ～ #10-24 | - | - | - | - | - | - | - | - | - | 1/2-13 ～ #10-24 | - | - | - | 3/8-24 ～ #10-32 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/4 ～ 10 | - | - | 5/16-24 ～ 7/16-20 | 1"-12 ～ #10-32 | - | - |
| Length (After Insertion) L (D = Screw Shaft Dia. M) | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D | 1.5D |
| Notch | No | Presence | No | Presence | Presence | No | Presence | Presence | Presence | Presence | No | Presence | Presence | Presence | No | No | Presence | No | Presence | Presence | No | Presence | No | Presence | No | No | - | No | Presence | Presence | - | No | Presence | No | Presence | Presence | Presence | No | Presence | Presence | No | Presence | Presence | No | - |
| Shape | Standard | - | Standard | - | - | Standard | - | - | - | - | - | Standard | - | - | Standard | - | - | Standard | - | - | Standard | - | Standard | - | - | Standard | - | Slotted | - | Standard | - | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | - | - | Standard | - |
| Sale Unit | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ～ Box/package | Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Box/package | - | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Box/package | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ～ Box/package | - | Low Quantity Available beginning with 1 pc. | Box/package | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | - | Box/package | Low Quantity Available beginning with 1 pc. ～ Box/package | Box/package | - | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | - | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. ～ Box/package | Box/package | Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. | Box/package | Low Quantity Available beginning with 1 pc. | - | - |
Loading...
Configure
Filters
-
Category
-
Application
- Light Metal
- Cast Iron
- General Resin
- Wood
-
Material
- Steel
- Stainless steel (SUS303 / SUS304)
- 316 Stainless Steel
- 430F Stainless Steel
- Brass
- Phosphor Bronze
- Nitronic 60
- Aluminum
- Stainless steel
-
Screw Type
- Metric (coarse) Thread
- Metric (fine) Thread
- Unify (coarse) Thread
- Unify (Fine) Thread
- Whitworth (Coarse) Screw
-
Metric / Inch
- metric
-
Thread Diameter (Inserted) - Metric
-
Thread Diameter (Inserted) - Inch
-
Length (After Insertion) L (D = Screw Shaft Dia. M)
-
Notch
-
Shape
-
Sale Unit
Brand
-
- Recoil (21)
- Hirosugi-Keiki (8)
- Japan Drive It (8)
- Tokai (6)
- Nippon Sprew (5)
- Accurate (4)
- Sunco (3)
- KSSC (2)
- Precision Tsugami (2)
- NBK (0)
- AMPG (0)
- IMAO (0)
- Sel Japan (0)
- Bohsei (0)
- ESCO (0)
- KKV (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy