MenuClose
Chamfering & Centering Tools（Tool Material Type：Carbide）
Select a subcategory
Center Drills & Countersinks
Chamfering & V-Groove Tools
Inner Radius Tools
Indexable Chamfering Tools, Inserts & Blades
| Days to Ship |
|
|---|
-
TiAlN Coated Carbide Center Drill, 60° Chamfering Model/Regular, Long
MISUMI
Carbide center drill ideal for centering during mass production drilling
- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
NINE9
• Single Blade/Double Blade: Single Blade
• Tool Material Type: Carbide
• Point Angle(θ): 90
• Coating Type: Non-Coated
• Tool Diameter D (mm): 6Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
FAGCCRCL FA Coated Carbide Corner Rounding Cutter Long Shank
S&K
[Features]
· A round chamfering cutter that can process a wide range of difficult-to-cut materials from raw materials to high hardness materials.
· The long shank allows for machining in deep sections.
· FA GCCRC long shank end millConfigure Now
Ships as soon as 4 Days -
2-Flute Spiral Chamfering Cutter FX-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
Configure Now
Ships as soon as 4 Days -
TiAlN Coated Carbide NC Spot Drill, Regular/Long Shack
MISUMI
Carbide spot drill that helps increase chamfering efficiency
Configure Now
Ships as soon as 4 Days -
NINE9
• Single Blade/Double Blade: Single Blade
• Tool Material Type: Carbide
• Coating Presence: Included
• Product Type: Insert
• Number Contained In A Packet: 5Configure Now
Ships as soon as 4 Days -
Center Drill, Okabe Standard, Type 1, Carbide 60°
OKABE
A center drill manufactured with tempering using the best heat treatment
Configure Now
Ships as soon as 5 Days -
TS Coated Carbide Chamfer, V Grooving End Mill, 2-Flute
MISUMI
Standard Chamfering and V Grooving Type [Note: When V groove machining, a flat surface is left on the core thickness portion]
- TS
- General Steel
- 2 Flutes
Configure Now
Ships as soon as Same Day Stock Items Included
-
TiAlN Coated Carbide Countersink, 3-Flute/90°, Regular, Long Shack
MISUMI
Carbide countersink essential in chamfering and deburring
Configure Now
Ships as soon as 4 Days -
NINE9
• Single Blade/Double Blade: Single Blade
• Tool Material Type: Carbide
• Coating Presence: Included
• Product Type: Insert
• Dimension T (mm): 2Configure Now
Ships as soon as 4 Days -
WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P
OSG
[Features]
・ Unique 3-flute specification suppresses chatter during machining and realizes high efficiency and high feed machining.
・ 40° twist and wide gullet combine sharpness and finished surface are achieved at a high level.
・ Returns and burrs are drastically reduced.
・ Excellent cutting chip discharge.Configure Now
Ships as soon as 4 Days -
Milling Cutter for 120° Chamfering Type N 6714
GUHRING
Taper half-angle 60° chamfering milling cutter.
Configure Now
Ships as soon as 4 Days -
Carbide Chamfering End Mill for Aluminum Machining, 2-Flute
MISUMI
The sharp helix blade achieves the clean machined surface with less burr
- Non-Coated
- Aluminum
- 2 Flutes
Configure Now
Ships as soon as 4 Days -
2-Flute Spiral Chamfering Cutter (for Copper and Aluminum Alloys) CA-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
Configure Now
Ships as soon as 4 Days -
Spiral Chamfering Cutter for SV Chamfering Process
UNION TOOL
• Single Blade/Double Blade: Single Blade
• Tool Material Type: Carbide
• Point Angle(θ): 90
• Half Angle of Taper A (°): 45Configure Now
Ships as soon as 4 Days -
Carbide Center Drill, B Type, ALD Coating
IWATATOOL
[Features]
· The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.
· Speed can be enhanced and life can be extended.Configure Now
Ships as soon as 4 Days -
Milling Cutter for 90° Chamfering Type N 6713
GUHRING
Taper half-angle 45° chamfering milling cutter.
Configure Now
Ships as soon as 4 Days -
TS Coated Carbide Chamfering End Mill, 2-Flute/Short Model
MISUMI
Helix Chamfer Type of the Popular Product
- TS
- General Steel
- 2 Flutes
- S (Short)
Configure Now
Ships as soon as Same Day Stock Items Included
-
TS Coated Carbide Chamfering End Mill, 3-Flute/Short Model
MISUMI
3-blade type of the popular helix chamfer that's capable of high feed
- TS
- General Steel
- 3 Flutes
- S (Short)
Configure Now
Ships as soon as 4 Days -
Carbide Inner R-cutter, 2-Flute
MISUMI
Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes
- Non-Coated
- General Steel
- 2 Flutes
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
DIXI
• Tool Material Type: Carbide
• Point Angle(θ): 90
• Diameter Tolerance: h6
• Shank Diameter Tolerance: h6Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Corner Radius Cutter for Carbide Aluminum
IWATATOOL
[Features]
· The raking blades/flutes ensure a highly precise rounded form.
· First-ever large rake angle for round chamfering tools, dramatically improved sharpness/surface roughness, significantly reduced cutting heat, and improved runout accuracyConfigure Now
Ships as soon as 4 Days -
Throw-Away Tip for C-Cutter Boy
BIG DAISHOWA
[Features]
· An economical type with long life that allows 3 corners of the carbide tip to be usedConfigure Now
Ships as soon as 4 Days -
Long Shank Low Helix Groove A Type 60° Carbide Center Hole Drill C-CD-SL
YAMAWA
• Single Blade/Double Blade: Double Blade
• Tool Material Type: Carbide
• Point Angle(θ): 60°
• Shape: CfConfigure Now
Ships as soon as 4 Days -
MUGEN Coating C Chamfer Cutter NSCV-M
NS TOOL
[Features]
· It enables easy C chamfering.
· Uses MUGEN coating that dramatically improves the durability.Configure Now
Ships as soon as 4 Days -
TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute/No Side Blade
MISUMI
The helix blade suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.
- TS
- SUS
- 2 Flutes
Configure Now
Ships as soon as 4 Days -
TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model
MISUMI
A single, highly efficient tool that's capable of centering, chamfering, and V grooving (Note: V grooving will leave a flat surface the thickness of the core. Ensure that you take core thickness into account)
Configure Now
Ships as soon as 4 Days -
TiAlN Coated Carbide Center Drill, 90° Chamfering Model
MISUMI
Carbide center drill ideal for centering during mass production drilling
Configure Now
Ships as soon as 4 Days -
MUGEN-COATING 2-Flute Inner Radius Cutter MIR200
NS TOOL
• Use: R Chamfer
• Tool Material Type: Carbide
• Coating Presence: Included
• Coating Type: TiAlNConfigure Now
Ships as soon as 4 Days -
FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series
OSG
[Features]
· FX coating with excellent oxidation resistanceConfigure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Corner Radius Cutter for Carbide Steel and Stainless Steel ALD Coating
IWATATOOL
[Features]
· The raking blades/flutes ensure a highly precise rounded form.
· First-ever large rake angle for round chamfering tools, dramatically improved sharpness/surface roughness, significantly reduced cutting heat, and improved runout accuracyConfigure Now
Ships as soon as 4 Days -
Carbide Center Drill Type A 60°
IWATATOOL
[Features]
· The carbide material supporting various machining is tougher and the shape is optimized, drastically reducing breakage issues.
· Speed can be enhanced and life can be extended.Configure Now
Ships as soon as 4 Days -
3 mm Shank for Pointing Drill Tip 90° Steel (TiAlN Coated)
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Improved wear resistance and long product life with TiAlN coating. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments
Configure Now
Ships as soon as 4 Days -
ASAHI TOOLS
• Single Blade/Double Blade: Single Blade
• Peripheral Blade Availability: Included
• Tool Material Type: Carbide
• Coating Type: Non-Coated
• Number Of Flutes (sheet): 2Configure Now
Ships as soon as 6 Days -
Milling Cutter for 60° Chamfering Type N 6711
GUHRING
Taper half-angle 30° chamfering milling cutter.
Configure Now
Ships as soon as 4 Days -
Configure Now
Ships as soon as 4 Days -
Electrodeposition Diamond Router ED-EM
OSG
Standard in-stock item, sold by designated agencies
[Features]
· Suitable for machining with lower cutting depth and brittle composites.
· Supports machinable ceramics processing as well.Configure Now
Ships as soon as 4 Days -
Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X
7 LEADERS
• Tool Material Type: Carbide
• Point Angle(θ): 90
• Coating Presence: Included
• Coating Type: Others
• Material: MGConfigure Now
Ships as soon as 4 Days -
FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series
OSG
[Features]
· FX coating with excellent oxidation resistanceConfigure Now
Ships as soon as 4 Days -
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
・ Unique 3-flute specification suppresses chattering during machining and realizes high efficiency and high feed machining
・ 40° twist and wide gullet combine sharpness and finished surface are achieved at a high level.
・ The return and burr are drastically reduced
・ Excellent cutting chip dischargeConfigure Now
Ships as soon as 4 Days -
WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P
OSG
[Features]
・ Unique 3-flute specification suppresses chatter during machining and realizes high efficiency and high feed machining.
・ 40° twist and wide gullet combine sharpness and finished surface are achieved at a high level.
・ Returns and burrs are drastically reduced.
・ Excellent cutting chip discharge.Configure Now
Ships as soon as 4 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Applications |
| Point Angle(deg) |
| Tool Diameter (D)(mm) |
| Work Material |
| Single Blade/Double Blade |
| Peripheral Blade Availability |
| Tool Material Type |
| Coating Presence |
| Coating Type |
| R Size(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | NINE9 | OSG | S&K | OSG | MISUMI | NINE9 | OKABE | MISUMI | MISUMI | NINE9 | OSG | GUHRING | MISUMI | OSG | UNION TOOL | IWATATOOL | GUHRING | MISUMI | MISUMI | MISUMI | OSG | DIXI | EIKOSHA | IWATATOOL | BIG DAISHOWA | YAMAWA | NS TOOL | MISUMI | MISUMI | MISUMI | NS TOOL | OSG | EIKOSHA | IWATATOOL | IWATATOOL | ATOM | ASAHI TOOLS | GUHRING | KYOWASEIKO | OSG | 7 LEADERS | OSG | OSG | OSG |
| Product Series | TiAlN Coated Carbide Center Drill, 60° Chamfering Model/Regular, Long | FAGCCRCL FA Coated Carbide Corner Rounding Cutter Long Shank | TiAlN Coated Carbide Countersink, 3-Flute/90°, Regular, Long Shack | 2-Flute Spiral Chamfering Cutter (for Copper and Aluminum Alloys) CA-SCC | Long Shank Low Helix Groove A Type 60° Carbide Center Hole Drill C-CD-SL | TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute/No Side Blade | TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model | FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series | Corner Radius Cutter for Carbide Steel and Stainless Steel ALD Coating | FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series | WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P | ||||||||||||||||||||||||||||||||||
| CAD | |||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 5 Days |
Same Day Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
Same Day Stock Items Included | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 6 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Specifications |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
| Applications | Centering (Positioning) | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove / Engraving | Centering (Positioning) | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Hole Chamfer | Centering (Positioning) / Engraving | - | - | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Hole Chamfer / Chamfering / Horizontal / R Chamfer | Centering (Positioning) | - | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | R Chamfer | R Chamfer | Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer | Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | R Chamfer | R Chamfer | Centering (Positioning) | Centering (Positioning) / Drilling | Hole Chamfer / Chamfering / Horizontal | - | Chamfering / Horizontal | - | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Chamfering / Horizontal | - |
| Point Angle(deg) | - | 90 | 90 | - | 90 | 90 ～ 120 | 60 ～ 90 | 60 | 60 ～ 120 | - | 45 ～ 60 | - | 120 | 90 | 90 | 90 | 60 | 90 | 60 ～ 120 | 90 | - | 90 | 90 | - | - | 45 | 60° | 45° | 90 | 60 ～ 120 | - | - | 60 | - | - | 60 | 90 | 60 ～ 90 | 60 | - | - | 90 | 90 | 90° | - |
| Tool Diameter (D)(mm) | 0.5 ～ 5 | 6 | 1 ～ 2 | 4 ～ 14 | 0.8 ～ 1 | 2 ～ 12 | 1–6 ～ 3 to 15 | 0.3 ～ 6 | 3 ～ 16 | 6.3 ～ 20.5 | 0.45～2.1 ～ 0.65～2.7 | - | 4 ～ 12 | 3 ～ 12 | 0.8 ～ 1 | 0.8 ～ 1 | 1 ～ 6.3 | 4 ～ 12 | 3 ～ 12 | 3 ～ 12 | - | 1 ～ 2 | 3 ～ 20 | 6.8 ～ 15.4 | 3 ～ 5 | - | 4 ～ 12 | 4 ～ 6 | 3 ～ 12 | 0.5 ～ 2 | 1 ～ 4 | 0.8 ～ 12.1 | 1 ～ 3.8 | 3.8 ～ 13.4 | 3 ～ 5 | 1 ～ 8 | 0.03 ～ 3 | 10 ～ 60 | 4 ～ 12 | - | 4 ～ 12 | 0.5 ～ 20 | 1 ～ 3.8 | - | - |
| Work Material | General Steel[◎] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | - | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○/◎] / Titanium[○] / Copper[○] / Resin[○] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | - | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | - | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Aluminum[◎] | General Steel[○] / Heat-Treated Steel[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Aluminum[○] / Copper[○] / Resin[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | - | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | - | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] | - | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] |
| Single Blade/Double Blade | Double Blade | Single Blade | Single Blade | - | Single Blade | Single Blade | Single Blade | Single Blade / Double Blade | Single Blade | Single Blade | Single Blade | - | - | Single Blade | Single Blade | Single Blade | Double Blade | - | Single Blade | Single Blade | Single Blade | Single Blade | - | - | Single Blade | - | Double Blade | Single Blade | Single Blade | Single Blade | Double Blade | - | Single Blade | - | Single Blade | Double Blade | Single Blade | Single Blade | - | Single Blade | - | - | Single Blade | Single Blade | - |
| Peripheral Blade Availability | None | None | None | None | None | None | None | None | None | None | None | - | - | None | None | None | None | - | Included | Included | None | None | - | - | None | - | None | Included | None | Included | None | - | None | - | None | None | Included | Included | - | - | - | - | None | None | - |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Coating Presence | Included | None | None | Included | Included | Included | Included | None | Included | Included | Included | Included | Included | None | None | None | Included | Included | Included | Included | None | None | None | - | None | Included | None | Included | Included | Included | Included | Included | Included | - | Included | None | Included | None | Included | None | Included | Included | Included | Included | Included |
| Coating Type | TiAlN | Non-Coated | Non-Coated | TiAlN | TiAlN | TiAlN | TiAlN / TiN / DLC | Non-Coated | Ts | TiAlN | TiAlN / TiN | Others | TiAlN | - | Non-Coated | - | Others | TiAlN | Ts | Ts | - | Non-Coated | - | - | - | Others | - | TiAlN | Ts | TiAlN | TiAlN | TiAlN | TiAlN | - | Others | - | TiAlN | Non-Coated | TiAlN | - | - | Others | TiAlN | - | Others |
| R Size(mm) | - | - | - | 0.5 ～ 5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.15 ～ 5 | - | - | - | 0.5 ～ 3 | 0.4 | - | - | - | - | - | 0.1 ～ 5 | - | - | 0.5 ～ 3 | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Filters
-
Applications
-
Metric / Inch
- metric
-
Point Angle(deg)
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.3, 0.6
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.5, 1
- 0.55
- 0.6
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 2
- 1–6
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2–10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
- 3
- 3~14
- 3 to 15
- 3.1
- 3.15
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.30/8.30/10.40/12.40/16.50/20.50
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 16
- 16.15
- 16.3
- 16.5
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.5
- 21
- 21.77
- 22
- 22.3
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- Max: 25, Min: 4.2
- 25.20
- 25.3
- 25.4
- 26
- 26.5
- 26.6
- 27
- 28
- 28.5
- 29
- 29.9
- 30
- Max: 30, Min: 4
- 30.20
- 30.5
- 31
- Max: 31, Min: 10
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- Max: 41, Min: 20
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 75.5
- 76
- 80
- 90
- 95
- 100
-
Work Material
-
Single Blade/Double Blade
-
Peripheral Blade Availability
-
Tool Material Type
-
Coating Presence
-
Coating Type
-
R Size(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- R0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- R0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- R1
- 1, 1.5
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- R2
- 2, 3
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- R3
- 3.25
- 3.5
- R3.5
- 3.75
- 4
- 4RM
- 4RY
- R4
- 4.25
- 4.5
- R4.5
- 4.75
- 5
- 5RM
- R5
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- R6
- 6.25
- 6.5
- 6.75
- 7
- R7
- 7.25
- 7.5
- 7.75
- 8
- R8
- 8.5
- 8.75
- 9
- R9
- 9.5
- 10
- R10
- 10.5
- 11
- 11~15
- 11.5
- 12
- R12
- 12.5
- R12.5
- 13
- 13.5
- 14
- 14.5
- 15
- R15
- 15.5
- 16
- R16
- 16–20
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Brand
-
- IWATATOOL (27)
- MAKOTOLOY (22)
- OSG (18)
- GUHRING (9)
- ATOM (8)
- EIKOSHA (8)
- KYOWASEIKO (7)
- YAMAWA (7)
- NS TOOL (5)
- DIJET (4)
- S&K (4)
- THE CUT (4)
- ASAHI TOOLS (3)
- DIXI (3)
- NINE9 (3)
- OKABE (2)
- OKAZAKI (2)
- 7 LEADERS (1)
- BIG DAISHOWA (1)
- TAIYO TOOL (1)
- UNION TOOL (1)
- FUJIGEN (0)
- ALPEN (0)
- MAPAL (0)
- RUKO (0)
- STARM (0)
- SKC (0)
- Poulten&Graf (0)
- Trusco Nakayama (0)
- ESCO (0)
- ILIX (0)
- DAIICHITOOL (0)
- FUKUDA (0)
- NOGA JAPAN (0)
CAD
-
- 2D
- 3D
Related Categories to Chamfering & Centering Tools
-
- Carbide End Mills
- Concrete Drill Bits
- Chamfering & Centering Tools
- Core Drill Bits
- Crinkey Cutters
- Custom Size Straight Flute End Mills
- Cutting Tool Accessories
- Drill Bits
- Electric Drill Bits
- Hole Saws
- HSS End Mills
- Magnetic Drill Press Cutters
- Milling Inserts & Holders
- Reamers
- Specialized Cutters
- Step Drills
- Threading Tools
- Turning Tools
- Wood Drills & Cutters
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy