Days to Ship |
|
---|
3 mm Shank for Pointing Drill Tip 90° Steel (TiAlN Coated)
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Improved wear resistance and long product life with TiAlN coating. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.
Configure Now
Ships as soon as | 4 Days |
---|
FUKUDA
A single product capable of five types of machining: center positioning, chamfering, side surface machining, drilling, and V-grooving.
Configure Now
Ships as soon as | 4 Days |
---|
3.175 mm Shank for Pointing Drill Tip 120° Steel
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments
Configure Now
Ships as soon as | 4 Days |
---|
3.175 mm Shank for Pointing Drill Tip 120° Steel (TiAlN Coated)
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Improved wear resistance and long product life with TiAlN coating. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments
Configure Now
Ships as soon as | 4 Days |
---|
3 mm Shank for Pointing Drill Tip 120° Steel
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments
Configure Now
Ships as soon as | 4 Days |
---|
3 mm Shank for Pointing Drill Tip 120° Steel (TiAlN Coated)
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Improved wear resistance and long product life with TiAlN coating. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments
Configure Now
Ships as soon as | 4 Days |
---|
3 mm Shank for Pointing Drill Tip 120° Non-Ferrous/Resin
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments
Configure Now
Ships as soon as | 4 Days |
---|
3 mm Shank for Pointing Drill Tip 90° Steel
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
Configure Now
Ships as soon as | 4 Days |
---|
EIKOSHA
Drill for positioning and chamfering.
[Features]
· TiN coating achieves longer life.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Standard type.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Long type.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.
Configure Now
Ships as soon as | 4 Days |
---|
Carbide V Cut End Mill Long Type Coated Series AMVL 120°
MAKOTOLOY
[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material.
· Long tool life, improved cutting speed and reduced machining time.
· Long type.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.
Configure Now
Ships as soon as | 4 Days |
---|
V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°
MAKOTOLOY
[Features]
· A small but high quality end mill that can also be used with high precision machining technology.
Configure Now
Ships as soon as | 4 Days |
---|
Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V
THE CUT
[Features]
· No need to turn over the work material. (Also removes through-hole burrs)
· Both sides can be chamfered with the one cutter tool.
· Ultra-fine particle carbide with TiAlN coating for a longer tool life.
Configure Now
Ships as soon as | 4 Days |
---|
THE CUT
[Features]
· Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.
· Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.
· Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly longer tool life.
Configure Now
Ships as soon as | 4 Days |
---|
Brand |
---|
Product Series |
Days to Ship |
Applications |
Point Angle(deg) |
Tool Diameter (D)(mm) |
Work Material |
Single Blade/Double Blade |
Peripheral Blade Availability |
Tool Material Type |
Coating Presence |
Coating Type |
R Size(mm) |
Brand | ATOM | MAKOTOLOY | FUKUDA | ATOM | ATOM | ATOM | ATOM | ATOM | ATOM | DIJET | DIJET | EIKOSHA | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | MAKOTOLOY | THE CUT | THE CUT |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120° | 3.175 mm Shank for Pointing Drill Tip 120° Steel (TiAlN Coated) | V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90° | V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90° | V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90° | V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90° | V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120° | Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V | |||||||||||||
Days to Ship | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
Applications | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling | Drilling |
Point Angle(deg) | 90 | 120 | 60 ~ 120 | 120 | 120 | 120 | 120 | 120 | 90 | 60 ~ 120 | 60 ~ 90 | 90 ~ 135 | 90 | 90 | 120 | 90 | 120 | 90 | 120 | 90 | 120 | 90 | 120 | 90° | 90 ~ 120 |
Tool Diameter (D)(mm) | 0.03 ~ 3 | 1 ~ 20 | 4 ~ 25 | 0.03 ~ 3 | 0.03 ~ 3 | 0.4 ~ 2.5 | 0.03 ~ 3 | 0.03 ~ 3 | 0.5 ~ 0.9 | 3 ~ 20 | 1 ~ 5 | 3 ~ 25 | 1 ~ 20 | 1 ~ 20 | 1 ~ 20 | 3 ~ 20 | 3 ~ 20 | 3 ~ 20 | 3 ~ 20 | 0.3 ~ 0.9 | 0.3 ~ 0.9 | 0.3 ~ 0.9 | 0.3 ~ 0.9 | 2.8 ~ 12 | 3 ~ 20 |
Work Material | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] | Aluminum[◎] / Resin[◎] | General Steel[○] / Heat-Treated Steel[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[◎] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Aluminum[○] |
Single Blade/Double Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Double Blade | - | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade |
Peripheral Blade Availability | Included | - | Included | Included | Included | Included | Included | Included | Included | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tool Material Type | Carbide | Carbide | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
Coating Presence | Included | None | None | None | Included | None | Included | None | None | None | None | Included | None | Included | Included | None | None | Included | Included | None | None | Included | Included | Included | Included |
Coating Type | TiAlN | - | Non-Coated | Non-Coated | TiAlN | Non-Coated | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | - | TiAlN | TiAlN | - | - | TiAlN | TiAlN | - | - | TiAlN | TiAlN | TiAlN | TiAlN |
R Size(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy