Days to Ship |
|
---|
Inserts - Press Fit, Brass, Cadmium-Free, Flanged Bit Insert
Tokai
General purpose type. Low cost and well balanced.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Threaded, Stainless Steel, E-Sert
Precision Tsugami
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
Configure Now
Ships as soon as | 4 Days |
---|
Japan Drive It
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8
Configure Now
Ships as soon as | 5 Days |
---|
Inserts - Threaded, Stainless Steel, Phosphor Bronze【1-100 Pieces Per Package】
Nippon Sprew
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Press Fit, Brass, Cadmium-Free, SB (Z) Type【1-8,000 Pieces Per Package】
Tokai
General purpose type. Low cost and well balanced.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Threaded, Inch Coarse【1-100 Pieces Per Package】
Nippon Sprew
Screw reinforcer featuring coiling of a diamond shaped stainless steel thread. Can achieve high-reliability tightening by using the springback skillfully.
Configure Now
Ships as soon as | 4 Days |
---|
Brass Insert Nut (Screw-In Type) IRB/IRB-C
Hirosugi-Keiki
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing
RoHS-compliant
Configure Now
Ships as soon as | 10 Days |
---|
Brass Insert Nut (Screw-In Type / Slotted) IRB-SW/-SCW
Hirosugi-Keiki
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing
RoHS-compliant
Configure Now
Ships as soon as | 10 Days |
---|
Inserts - Press Fit, Brass, Cadmium-Free, Flanged
Tokai
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Recoil Free Running Thread, Stainless Steel, with Notch, Metric
Recoil
Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Recoil Threaded, Stainless Steel【1-100 Pieces Per Package】
Sunco
[Nominal M] 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
[Material] Stainless Steel
[Surface Processing] Bare
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Threaded, Stainless Steel, Metric Fine, E-Sert Hemlock-Made【100 Pieces Per Package】
Sunco
[Nominal M] 6, 8, 14, 18, 20, 22, 24, 27, 30, 33, 36, 39
[Material] Stainless Steel
[Surface Processing] Bare
Configure Now
Ships as soon as | 4 Days |
---|
Aluminum Insert Nut (Screw-In Type / Coated With Loosening Prevention Agent) IRL-BW/-KW
Hirosugi-Keiki
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Lead-free free-cutting aluminum (KS26), lead content 300 ppm or less
[Treatment] Black anodized (BAL)/Kanigen plating
RoHS-compliant
Configure Now
Ships as soon as | 10 Days |
---|
Inserts - Press Fit, Brass, Cadmium-Free, SD Type
Tokai
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
Configure Now
Ships as soon as | 4 Days |
---|
Inserts - Self Tapping, Slotted, SCT Type
Japan Drive It
[Type] Self-tapping Used
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3, 4, 5, 6, 8, 10, Length (following insertion)
[L](D = screw diameter M) 2D 2.5D
[Length] B (mm) 6.0 8.0 10.0 14.0 15.0 18.0
Configure Now
Ships as soon as | 5 Days |
---|
Brass Insert Nut (Screw-In Type / Slotted) IRB-S/IRB-SC
Hirosugi-Keiki
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing
RoHS-compliant
Configure Now
Ships as soon as | 10 Days |
---|
Inserts - Threaded, Metric Fine, E-Sert
Precision Tsugami
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, which ensures highly durable fastening.
Configure Now
Ships as soon as | 4 Days |
---|
Aluminum Insert Nut (Screw-In Type) IRL-B/IRL-K
Hirosugi-Keiki
[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Lead-free free-cutting aluminum (KS26), lead content 300 ppm or less
[Treatment] Black anodized (BAL)/Kanigen plating
RoHS-compliant
Configure Now
Ships as soon as | 10 Days |
---|
Brass Insert Nut (Screw-In Type) IRB-W/-CW
Hirosugi-Keiki
[Nominal designation of thread (M)] 2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing
RoHS-compliant
Configure Now
Ships as soon as | 10 Days |
---|
Brand |
---|
Product Series |
Days to Ship |
Category |
Application |
Material |
Screw Type |
Thread Diameter (Inserted) - Metric |
Thread Diameter (Inserted) - Inch |
Length (After Insertion) L (D = Screw Shaft Dia. M) |
Notch |
Shape |
Sale Unit |
Brand | Tokai | Precision Tsugami | Japan Drive It | Nippon Sprew | Tokai | Nippon Sprew | Hirosugi-Keiki | Hirosugi-Keiki | Tokai | Recoil | Sunco | Sunco | Hirosugi-Keiki | Tokai | Japan Drive It | Hirosugi-Keiki | Precision Tsugami | Hirosugi-Keiki | Hirosugi-Keiki |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Inserts - Press Fit, Brass, Cadmium-Free, Flanged Bit Insert | Inserts - Threaded, Stainless Steel, Phosphor Bronze【1-100 Pieces Per Package】 | Inserts - Press Fit, Brass, Cadmium-Free, SB (Z) Type【1-8,000 Pieces Per Package】 | Inserts - Recoil Free Running Thread, Stainless Steel, with Notch, Metric | Inserts - Recoil Threaded, Stainless Steel【1-100 Pieces Per Package】 | Inserts - Threaded, Stainless Steel, Metric Fine, E-Sert Hemlock-Made【100 Pieces Per Package】 | Aluminum Insert Nut (Screw-In Type / Coated With Loosening Prevention Agent) IRL-BW/-KW | ||||||||||||
Days to Ship | 4 Days | 4 Days | 5 Days | 4 Days | 4 Days | 4 Days | 10 Days | 10 Days | 4 Days | 4 Days | 4 Days | 4 Days | 10 Days | 4 Days | 5 Days | 10 Days | 4 Days | 10 Days | 10 Days |
Category | Standard | Standard | Press Fitting | Standard | Standard | Standard | Self-Tapping | Self-Tapping | Standard | Standard | Standard | Standard | Self-Tapping | Standard | Self-Tapping | Self-Tapping | Standard | Self-Tapping | Self-Tapping |
Application | General Resin | Light Metal / Cast Iron / General Resin | - | Light Metal | General Resin | Light Metal | Light Metal | Light Metal | General Resin | Light Metal | - | - | Light Metal | General Resin | General Resin | Light Metal | Light Metal / Cast Iron / General Resin | Light Metal | Light Metal |
Material | Brass | Stainless steel (SUS303 / SUS304) | Brass | Stainless steel (SUS303 / SUS304) / Phosphor Bronze | Brass | Stainless steel (SUS303 / SUS304) | Brass | Brass | Brass | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Aluminum | Brass | Brass | Brass | Stainless steel (SUS303 / SUS304) | Aluminum | Brass |
Screw Type | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Unify (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread |
Thread Diameter (Inserted) - Metric | 3 ~ 4 | 2.5 ~ 20 | 2 | 2 ~ 16 | 1.6 ~ 4 | - | 2 ~ 5 | 3 ~ 5 | 3 | 2 ~ 18 | 3 ~ 18 | 8 ~ 14 | 3 ~ 5 | 2.6 ~ 6 | 6 | 3 ~ 5 | 10 | 2 ~ 5 | 3 ~ 5 |
Thread Diameter (Inserted) - Inch | - | - | - | - | - | 1/4-20 ~ #4-40 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Length (After Insertion) L (D = Screw Shaft Dia. M) | 2.5D | 2.5D | 2.5D | 2.5D | 2.5D | 2.5D | 2.5D | 2.5D | 2.5D | 2.5D | 2.5D | 2.5D | 2.5D | 2.5D | 2.5D | 2.5D | 2.5D | 2.5D | 2.5D |
Notch | No | Presence | No | Presence | No | Presence | No | No | No | Presence | Presence | Presence | No | No | No | No | Presence | No | No |
Shape | Standard | - | Standard | - | Standard | - | Standard | Slotted | Standard | - | Standard | Standard | Standard | Standard | Standard | Slotted | - | Standard | Standard |
Sale Unit | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. ~ Box/package | Low Quantity Available beginning with 1 pc. ~ Box/package | Box/package | Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ~ Box/package | Box/package | Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Box/package | Low Quantity Available beginning with 1 pc. | Box/package | Box/package |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy